Evaluation of Path Lengths in Proposed Triangle Network

Routing tag provides the algorithm to pass the data from source to destination in a network. In this paper Fault Tolerance of the proposed MIN Triangle has been analysed . All the path lengths available from source to destination have been found

Tõrkeid taluv võrk, mis baseerub Linux süsteemil ja kasutab vana riistvara

Networking at enterprise level is fast, reliable,fault-tolerant, expensive and usually includes a vendor lock-in. This thesis tries to take the good qualities of the enterprise level networking and remove the negative side effects. One possible way to solve the problem is to create a networking solution that uses obsolete hardware and free software to neglect the negative properties of enterprise networking. This kind of solution can be achieved without any need for more system administration knowledge or know-how. Moreover, the thesis conducts an analysis of the previous work done by other people on fault tolerance in networking and offers the author’s own solution implementation. The main result of this thesis is a low-cost solution to Internet service provider and router failover. The tests that were carried out show that it is possible to create a network that, even in the case of ISP and/or router failure, can continue functioning at full speed without significant delays and without disrupting the presently occurring data transmission. The thesis’s work uses computer hardware that has been announced old by its previous owners and software that is open source and readily deployable with a little skill. From a theoretical point of view it should be acknowledged that the author understands that software routing is not as good as hardware routing, however the overall idea was to offer a solution which could theoretically perform as similar as possible to the hardware routing

Low-Memory Techniques for Routing and Fault-Tolerance on the Fat-Tree Topology

Actualmente, los clústeres de PCs están considerados como una alternativa eficiente a la hora de construir supercomputadores en los que miles de nodos de computación se conectan mediante una red de interconexión. La red de interconexión tiene que ser diseñada cuidadosamente, puesto que tiene una gran influencia sobre las prestaciones globales del sistema. Dos de los principales parámetros de diseño de las redes de interconexión son la topología y el encaminamiento. La topología define la interconexión de los elementos de la red entre sí, y entre éstos y los nodos de computación. Por su parte, el encaminamiento define los caminos que siguen los paquetes a través de la red. Las prestaciones han sido tradicionalmente la principal métrica a la hora de evaluar las redes de interconexión. Sin embargo, hoy en día hay que considerar dos métricas adicionales: el coste y la tolerancia a fallos. Las redes de interconexión además de escalar en prestaciones también deben hacerlo en coste. Es decir, no sólo tienen que mantener su productividad conforme aumenta el tamaño de la red, sino que tienen que hacerlo sin incrementar sobremanera su coste. Por otra parte, conforme se incrementa el número de nodos en las máquinas de tipo clúster, la red de interconexión debe crecer en concordancia. Este incremento en el número de elementos de la red de interconexión aumenta la probabilidad de aparición de fallos, y por lo tanto, la tolerancia a fallos es prácticamente obligatoria para las redes de interconexión actuales. Esta tesis se centra en la topología fat-tree, ya que es una de las topologías más comúnmente usadas en los clústeres. El objetivo de esta tesis es aprovechar sus características particulares para proporcionar tolerancia a fallos y un algoritmo de encaminamiento capaz de equilibrar la carga de la red proporcionando una buena solución de compromiso entre las prestaciones y el coste.Gómez Requena, C. (2010). Low-Memory Techniques for Routing and Fault-Tolerance on the Fat-Tree Topology [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/8856Palanci

Fault-Tolerant Single-Chip Vector Processor : architecture and performance analysis using Livermore loop benchmarks

Electrical Engineerin

Routing on the Channel Dependency Graph:: A New Approach to Deadlock-Free, Destination-Based, High-Performance Routing for Lossless Interconnection Networks

In the pursuit for ever-increasing compute power, and with Moore's law slowly coming to an end, high-performance computing started to scale-out to larger systems. Alongside the increasing system size, the interconnection network is growing to accommodate and connect tens of thousands of compute nodes. These networks have a large influence on total cost, application performance, energy consumption, and overall system efficiency of the supercomputer. Unfortunately, state-of-the-art routing algorithms, which define the packet paths through the network, do not utilize this important resource efficiently. Topology-aware routing algorithms become increasingly inapplicable, due to irregular topologies, which either are irregular by design, or most often a result of hardware failures. Exchanging faulty network components potentially requires whole system downtime further increasing the cost of the failure. This management approach becomes more and more impractical due to the scale of today's networks and the accompanying steady decrease of the mean time between failures. Alternative methods of operating and maintaining these high-performance interconnects, both in terms of hardware- and software-management, are necessary to mitigate negative effects experienced by scientific applications executed on the supercomputer. However, existing topology-agnostic routing algorithms either suffer from poor load balancing or are not bounded in the number of virtual channels needed to resolve deadlocks in the routing tables. Using the fail-in-place strategy, a well-established method for storage systems to repair only critical component failures, is a feasible solution for current and future HPC interconnects as well as other large-scale installations such as data center networks. Although, an appropriate combination of topology and routing algorithm is required to minimize the throughput degradation for the entire system. This thesis contributes a network simulation toolchain to facilitate the process of finding a suitable combination, either during system design or while it is in operation. On top of this foundation, a key contribution is a novel scheduling-aware routing, which reduces fault-induced throughput degradation while improving overall network utilization. The scheduling-aware routing performs frequent property preserving routing updates to optimize the path balancing for simultaneously running batch jobs. The increased deployment of lossless interconnection networks, in conjunction with fail-in-place modes of operation and topology-agnostic, scheduling-aware routing algorithms, necessitates new solutions to solve the routing-deadlock problem. Therefore, this thesis further advances the state-of-the-art by introducing a novel concept of routing on the channel dependency graph, which allows the design of an universally applicable destination-based routing capable of optimizing the path balancing without exceeding a given number of virtual channels, which are a common hardware limitation. This disruptive innovation enables implicit deadlock-avoidance during path calculation, instead of solving both problems separately as all previous solutions

Topology Architecture and Routing Algorithms of Octagon-Connected Torus Interconnection Network

Two important issues in the design of interconnection networks for massively parallel computers are scalability and small diameter. A new interconnection network topology, called octagon-connected torus (OCT), is proposed. The OCT network combines the small diameter of octagon topology and the scalability of torus topology. The OCT network has better properties, such as small diameter, regular, symmetry and the scalability. The nodes of the OCT network adopt the Johnson coding scheme which can make routing algorithms simple and efficient. Both unicasting and broadcasting routing algorithms are designed for the OCT network, and it is based on the Johnson coding scheme. A detailed analysis shows that the OCT network is a better interconnection network in the properties of topology and the performance of communication

Efficient mechanisms to provide fault tolerance in interconnection networks for pc clusters

Actualmente, los clusters de PC son un alternativa rentable a los computadores paralelos. En estos sistemas, miles de componentes (procesadores y/o discos duros) se conectan a través de redes de interconexión de altas prestaciones. Entre las tecnologías de red actualmente disponibles para construir clusters, InfiniBand (IBA) ha emergido como un nuevo estándar de interconexión para clusters. De hecho, ha sido adoptado por muchos de los sistemas más potentes construidos actualmente (lista top500). A medida que el número de nodos aumenta en estos sistemas, la red de interconexión también crece. Junto con el aumento del número de componentes la probabilidad de averías aumenta dramáticamente, y así, la tolerancia a fallos en el sistema en general, y de la red de interconexión en particular, se convierte en una necesidad. Desafortunadamente, la mayor parte de las estrategias de encaminamiento tolerantes a fallos propuestas para los computadores masivamente paralelos no pueden ser aplicadas porque el encaminamiento y las transiciones de canal virtual son deterministas en IBA, lo que impide que los paquetes eviten los fallos. Por lo tanto, son necesarias nuevas estrategias para tolerar fallos. Por ello, esta tesis se centra en proporcionar los niveles adecuados de tolerancia a fallos a los clusters de PC, y en particular a las redes IBA. En esta tesis proponemos y evaluamos varios mecanismos adecuados para las redes de interconexión para clusters. El primer mecanismo para proporcionar tolerancia a fallos en IBA (al que nos referimos como encaminamiento tolerante a fallos basado en transiciones; TFTR) consiste en usar varias rutas disjuntas entre cada par de nodos origen-destino y seleccionar la ruta apropiada en el nodo fuente usando el mecanismo APM proporcionado por IBA. Consiste en migrar las rutas afectadas por el fallo a las rutas alternativas sin fallos. Sin embargo, con este fin, es necesario un algoritmo eficiente de encaminamiento capaz de proporcionar suficientesMontañana Aliaga, JM. (2008). Efficient mechanisms to provide fault tolerance in interconnection networks for pc clusters [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/2603Palanci