82,706 research outputs found
Accounting for Failures in Delay Analysis for WirelessHART Networks
WirelessHART networks are gaining ground as a real-time communication infrastructure in industrial wireless control systems. Because wireless communication is often susceptible to transmission failures in industrial environments, it is essential to account for failures in the delay analysis for realtime flows between sensors and actuators in process control. WirelessHART networks handle transmission failures through retransmissions using dedicated and shared time slots through different paths in the routing graphs. While these mechanisms for handling transmission failures are critical for process control requiring reliable communication, they introduce substantial challenges to worst-case end-to-end delay analysis for real-time flows. This paper presents the first worst-case end-to-end delay analysis for periodic real-time flows in a WirelessHART network that takes into account transmission failures. The delay bounds can be used to quickly assess the schedulability of real-time flows for industrial wireless control applications with stringent requirements on both high reliability and network latency. Simulations based on the topologies of a wireless sensor network testbed consisting of 69 TelosB motes indicate that our analysis provides safe upper bounds of the end-to-end delays of real-time flows at an acceptable level of pessimism
Adaptive parameters adjustment in WBAN to mitigate Wi-Fi interferences
Wireless Body Area Network (WBAN), called also Wireless Body Sensor Network (WBSN), is composed of a set of tiny wireless devices (sensors) attached, implanted or ingested into the body. It offers real time and ubiquitous applications thanks to the small form, the lightness, and the wireless interface of sensors. WBAN performance is expected to be considerably degraded in the presence of Wi-Fi networks. Their operating channels overlap in the 2.4 GHz Industrial Scientific and Medical (ISM) band which produces interference when they transmit data, accompanied by data losses and quick battery exhaustion. Therefore, it is crucial to mitigate the interference between WBAN and Wi-Fi networks in order to maintain the efficiency and the reliability of the WBAN system. Proposals in the literature use an added complex hardware in WBAN system, or perform the exchange of additional information, or establish expensive communications, or affect the quality of service of the WBAN. Unlike previous researches, we proposed simple, low cost and dynamic method that adaptively adjusts specific parameters in the Medium Access Control (MAC) layer. We have proved the effectiveness of our approach based on theoretical analysis and simulation using MiXiM framework of OMNet++ simulato
Recommended from our members
Graph-theoretic channel modeling and topology control protocols for wireless sensor networks
This report addresses two different research problems: (i) It presents a wireless channel model that reduces the complexity associated with high order Markov chains; and (ii) presents energy efficient topology control protocols which provide reliability while maintaining the topology in an energy efficient manner. For the above problems, real wireless sensor network traces were collected and extensive simulations were performed for evaluating the proposed protocols.
Accurate simulation and analysis of wireless networks are inherently dependent on accurate models which are able to provide real-time channel characterization. High-order Markov chains are typically used to model errors and losses over wireless channels. However, complexity (i.e., the number of states) of a high-order Markov model increases exponentially with the memory-length of the underlying channel.
In this report, a novel graph-theoretic methodology that uses Hamiltonian circuits to reduce the complexity of a high-order Markov model to a desired state budget is presented. The implication of unused states in complexity reduction of higher order Markov model is also explained. The trace-driven performance evaluations for real wireless local area network (WLAN) and wireless sensor network (WSN) channels demonstrate that the proposed Hamiltonian Model, while providing orders of magnitude reduction in complexity, renders an accuracy that is comparable to the Markov model and better than the existing reduced state models.
Furthermore, a methodology to preserve energy is presented to increase the network lifetime by reducing the node degree forming an active backbone while considering network connectivity. However, in energy stringent wireless sensor networks, it is of utmost importance to construct the reduced topology with the minimal control overhead. Moreover, most wireless links in practice are lossy links with connectivity probability which desires that a routing protocol provides routing flexibility and reliability at a minimum energy consumption cost. For this purpose, distributed and semi-distributed novel graph-theoretic topology construction protocols are presented that exploit cliques and polygons in a WSN to achieve energy efficiency and reliability. The proposed protocols also facilitate load rotation under topology maintenance, thereby extending the network lifetime. In addition to the above, the report also evaluates why the backbone construction using connected dominating set (CDS) in certain cases remains unable to provide connected sensing coverage in the area covered. For this purpose, a novel protocol that reduces the topology while considering sensing area coverage is presented
Wireless industrial monitoring and control networks: the journey so far and the road ahead
While traditional wired communication technologies have played a crucial role in industrial monitoring and control networks over the past few decades, they are increasingly proving to be inadequate to meet the highly dynamic and stringent demands of today’s industrial applications, primarily due to the very rigid nature of wired infrastructures. Wireless technology, however, through its increased pervasiveness, has the potential to revolutionize the industry, not only by mitigating the problems faced by wired solutions, but also by introducing a completely new class of applications. While present day wireless technologies made some preliminary inroads in the monitoring domain, they still have severe limitations especially when real-time, reliable distributed control operations are concerned. This article provides the reader with an overview of existing wireless technologies commonly used in the monitoring and control industry. It highlights the pros and cons of each technology and assesses the degree to which each technology is able to meet the stringent demands of industrial monitoring and control networks. Additionally, it summarizes mechanisms proposed by academia, especially serving critical applications by addressing the real-time and reliability requirements of industrial process automation. The article also describes certain key research problems from the physical layer communication for sensor networks and the wireless networking perspective that have yet to be addressed to allow the successful use of wireless technologies in industrial monitoring and control networks
Wireless sensor network for health monitoring
Wireless Sensor Network (WSN) is becoming a significant enabling technology for a wide variety of applications. Recent advances in WSN have facilitated the realization of pervasive health monitoring for both homecare and hospital environments. Current technological advances in sensors, power-efficient integrated circuits, and wireless communication have allowed the development of miniature, lightweight, low-cost, and smart physiological sensor nodes. These nodes are capable of sensing, processing, and communicating one or more vital signs. Furthermore, they can be used in wireless personal area networks (WPANs) or wireless body sensor networks (WBSNs) for health monitoring. Many studies were performed and/or are under way in order to develop flexible, reliable, secure, real-time, and power-efficient WBSNs suitable for healthcare applications. To efficiently control and monitor a patient’s status as well as to reduce the cost of power and maintenance, IEEE 802.15.4/ZigBee, a communication standard for low-power wireless communication, is developed as a new efficient technology in health monitoring systems. The main contribution of this dissertation is to provide a modeling, analysis, and design framework for WSN health monitoring systems. This dissertation describes the applications of wireless sensor networks in the healthcare area and discusses the related issues and challenges. The main goal of this study is to evaluate the acceptance of the current wireless standard for enabling WSNs for healthcare monitoring in real environment. Its focus is on IEEE 802.15.4/ZigBee protocols combined with hardware and software platforms. Especially, it focuses on Carrier Sense Multiple Access with Collision Avoidance mechanism (CSMA/CA) algorithms for reliable communication in multiple accessing networks. The performance analysis metrics are established through measured data and mathematical analysis.
This dissertation evaluates the network performance of the IEEE 802.15.4 unslotted CSMA/CA mechanism for different parameter settings through analytical modeling and simulation. For this protocol, a Markov chain model is used to derive the analytical expression of normalized packet transmission, reliability, channel access delay, and energy consumption. This model is used to describe the stochastic behavior of random access and deterministic behavior of IEEE 802.15.4 CSMA/CA. By using it, the different aspects of health monitoring can be analyzed. The sound transmission of heart beat with other smaller data packet transmission is studied. The obtained theoretical analysis and simulation results can be used to estimate and design the high performance health monitoring systems
Survey on wireless technology trade-offs for the industrial internet of things
Aside from vast deployment cost reduction, Industrial Wireless Sensor and Actuator Networks (IWSAN) introduce a new level of industrial connectivity. Wireless connection of sensors and actuators in industrial environments not only enables wireless monitoring and actuation, it also enables coordination of production stages, connecting mobile robots and autonomous transport vehicles, as well as localization and tracking of assets. All these opportunities already inspired the development of many wireless technologies in an effort to fully enable Industry 4.0. However, different technologies significantly differ in performance and capabilities, none being capable of supporting all industrial use cases. When designing a network solution, one must be aware of the capabilities and the trade-offs that prospective technologies have. This paper evaluates the technologies potentially suitable for IWSAN solutions covering an entire industrial site with limited infrastructure cost and discusses their trade-offs in an effort to provide information for choosing the most suitable technology for the use case of interest. The comparative discussion presented in this paper aims to enable engineers to choose the most suitable wireless technology for their specific IWSAN deployment
- …