Multicast traffic aggregation in MPLS-based VPN networks

This article gives an overview of the current practical approaches under study for a scalable implementation of multicast in layer 2 and 3 VPNs over an IP-MPLS multiservice network. These proposals are based on a well-known technique: the aggregation of traffic into shared trees to manage the forwarding state vs. bandwidth saving trade-off. This sort of traffic engineering mechanism requires methods to estimate the resources needed to set up a multicast shared tree for a set of VPNs. The methodology proposed in this article consists of studying the effect of aggregation obtained by random shared tree allocation on a reference model of a representative network scenario.Publicad

Layer 3 Multiprotocol Label Switching Virtual Private Network

Layer 3 Multiprotocol Label Switching Virtual Private Networks (L3 MPLS VPNs) is becoming a key technology of Service Providers' Services for corporations who desire to use remote connectivity. It is getting more popularity by customers for its significant advantages over the prior VPN technologies such as Frame relay and ATM. The main purpose of this thesis project was to develop an understanding of L3 MPLS VPNs in theory and practice. It is targeting to explain the technology briefly and demonstrate how it works to prepare a learning material for Data Network Services course given at VAMK, University of Applied Sciences. The practical part of this project took place in the Technobothnia Research Center using Cisco technology. Four Cisco 2801 routers, laboratory computers and Ethernet and serial media links were used to build the network and accomplish connectivity. There are also software tools used such as HyperTerminal to configure the routers and WireShark packet analyzer to examine the communication protocols used for connectivity

WSN based sensing model for smart crowd movement with identification: a conceptual model

With the advancement of IT and increase in world population rate, Crowd Management (CM) has become a subject undergoing intense study among researchers. Technology provides fast and easily available means of transport and, up-to-date information access to the people that causes crowd at public places. This imposes a big challenge for crowd safety and security at public places such as airports, railway stations and check points. For example, the crowd of pilgrims during Hajj and Ummrah while crossing the borders of Makkah, Kingdom of Saudi Arabia. To minimize the risk of such crowd safety and security identification and verification of people is necessary which causes unwanted increment in processing time. It is observed that managing crowd during specific time period (Hajj and Ummrah) with identification and verification is a challenge. At present, many advanced technologies such as Internet of Things (IoT) are being used to solve the crowed management problem with minimal processing time. In this paper, we have presented a Wireless Sensor Network (WSN) based conceptual model for smart crowd movement with minimal processing time for people identification. This handles the crowd by forming groups and provides proactive support to handle them in organized manner. As a result, crowd can be managed to move safely from one place to another with group identification. The group identification minimizes the processing time and move the crowd in smart way

Concepção e implementação de experiências laboratoriais sobre MPLS

Mestrado em Engenharia Electrónica e TelecomunicaçõesO Multiprotocol Label Switching (MPLS) é um mecanismo de transporte de dados, sob a forma de um protocolo agnóstico, com grande potencial de crescimento e adequação. Opera na “Camada 2.5” do modelo OSI e constitui um mecanismo de alto desempenho utilizado nas redes de núcleo para transportar dados de um nó da rede para outro. O sucesso do MPLS resulta do facto de permitir que a rede transporte todos os tipos de dados, desde tráfego IP a tráfego da camada de ligação de dados, devido ao encapsulamento dos pacotes dos diversos protocolos, permitindo a criação de “links virtuais” entre nós distantes. O MPLS pertence à família das “redes de comutação de pacotes”, sendo os pacotes de dados associados a “etiquetas” que determinam o seu encaminhamento, sem necessidade de examinar o conteúdo dos próprios pacotes. Isto permite a criação de circuitos “extremo-aextremo” através de qualquer tipo de rede de transporte e independentemente do protocolo de encaminhamento que é utilizado. O projecto do MPLS considera múltiplas tecnologias no sentido de prestar um serviço único de transporte de dados, tentando simultaneamente proporcionar capacidades de engenharia de tráfego e controlo “out-of-band”, uma característica muito atraente para uma implementação em grande escala. No fundo, o MPLS é uma forma de consolidar muitas redes IP dentro de uma única rede. Dada a importância desta tecnologia, é urgente desenvolver ferramentas que permitam entender melhor a sua complexidade. O MPLS corre normalmente nas redes de núcleo dos ISPs. No sentido de tornar o seu estudo viável, recorreu-se nesta dissertação à emulação para implementar cenários de complexidade adequada. Existem actualmente boas ferramentas disponíveis que permitem a recriação em laboratório de cenários bastante complicados. Contudo, a exigência computacional da emulação é proporcional à complexidade do projecto em questão, tornando-se rapidamente impossível de realizar numa única máquina. A computação distribuída ou a “Cloud Computing” são actualmente as abordagens mais adequadas e inovadoras apara a resolução deste problema. Esta dissertação tem como objectivo criar algumas experiências em laboratório que evidenciam aspectos relevantes da tecnologia MPLS, usando para esse efeito um emulador computacional, o Dynamips, impulsionado por generosas fontes computacionais disponibilizadas pela Amazon ec2. A utilização destas ferramentas de emulação permite testar cenários de rede e serviços reais em ambiente controlado, efectuando o debugging das suas configurações e optimizando o seu desempenho, antes de os colocar em funcionamento nas redes em operação.The Multiprotocol Label Switching (MPLS) is a highly scalable and agnostic protocol to carry network data. Operating at "Layer 2.5" of the OSI model, MPLS is an highperformance mechanism that is used at the network backbone for conveying data from one network node to the next. The success of MPLS results from the fact that it enables the network to carry all kinds of traffic, ranging from IP to layer 2 traffic, since it encapsulates the packets of the diverse network protocols, allowing the creation of "virtual links" between distant nodes. MPLS belongs to the family of packet switched networks, where labels are assigned to data packets that are forwarded based on decisions that rely only on the label contents, without the need to examine the packets contents. This allows the creation of end-to-end circuits across any type of transport medium, using any protocol. The MPLS design takes multiform transport technologies into account to provide a unified data-carrying service, attempting simultaneously to preserve traffic engineering and out-of-band control, a very attractive characteristic for large-scale deployment. MPLS is the way to consolidate many IP networks into a single one. Due to this obvious potential, it is urgent to develop means and tools to better understand its functioning and complexity. MPLS normally runs at the backbone of Service Providers networks, being deployed across an extensive set of expensive equipment. In order to turn the study of MPLS feasible, emulation was considered as the best solution. Currently, there are very good available tools to recreate, in a lab environment, quite complicated scenarios. However, the computational demand of the emulation is proportional to the complexity of the project, becoming quickly unfeasible in a single machine. Fortunately, distributed computing or Cloud computing are suitable and novel approaches to solve this computation problem. So, this work aims to create some lab experiments that can illustrate/demonstrate relevant aspects of the MPLS technology, using the Dynamips emulator driven by the computational resources that were made available by the Amazon ec2 cloud computing facilities. The utilization of these emulation tools allows testing real networks and service scenarios in a controlled environment, being able to debug their configurations and optimize their performance before deploying them in real operating networks

Planning tools for MPLS networks

Verkot, joissa MPLS-tekniikkaa (Multi Protocol Label Switching) käytetään pakettien reitittämiseen, kasvavat jatkuvasti yhä suuremmiksi ja toiminnallisuus, jota verkoissa tarvitaan, monipuolistuu koko ajan. Tämän syyn vuoksi verkon suunnittelija tarvitsee yhä parempia apuvälineitä, jotta suunnittelu olisi onnistunutta, optimaalista ja tuottaisi halutun tuloksen. Tämän diplomityön tarkoitus on selvittää tärkeimmät toiminnallisuudet ja ominaisuudet, joita MPLS-verkkojen suunnitteluun laadittu työkalu vaatii. Diplomityö on jaettu kolmeen osaan. Ensimmäisessä osassa valotetaan MPLS-verkkojen käyttämää tekniikkaa. Tuossa osiossa käydään läpi tekniikat ja protokollat, joita MPLS-verkot käyttävät erinäisiin tehtäviin. Ensin käydään läpi yleisesti miksi MPLS-tekniikkaa ylipäätään tarvitaan ja miksi sitä käytetään verkkojen reitittämiseen. Tämän jälkeen tarkastellaan MPLS-protokollan otsikkokenttää ja sen osien käyttötarkoitukset selitetään. Sitten tarkastellaan MPLS-verkon rakennetta ja siihen kuuluvia laitteita. Seuraavaksi siirrytään osioon, joka selvittää kaikki yleisesti MPLS-polkujen rakentamiseen käytettävät protokollat ja miten ne eroavat toisistaan. Tämän jälkeen kerrotaan MPLS-vuonohjauksesta Differentiated Services-tekniikan avulla ja siitä miten se auttaa erilaisten liikenneluokkien erittelyssä MPLS-liikenteessä. Viimeinen kohta tässä osassa listaa erilaiset VPN-yhteydet, jotka ovat mahdollisia MPLS-tekniikkaa käytettäessä. Osio selventää näiden tekniikoiden eroavaisuudet ja mahdollisuudet, joita nämä MPLS-tekniikan avulla toteutettavat VPN-yhteydet suovat verrattuna aiempiin VPN-toteutuksiin. Toinen osa tässä diplomityössä kertoo verkon suunnittelusta. Ensin käydään läpi verkon suunnittelua yleisellä tasolla. Tämä osa sisältää verkon suunnittelun eri vaiheet pääosittain: erilaiset ennustusmallit esitellään ja selvitetään mitoituksen ja vuonohjauksen rooli verkkosuunnittelussa. Näiden jälkeen siirrytään yleisestä verkonsunnittelusta osioihin, joita käytetään MPLS-verkon suunnittelussa ja joiden yleisesti oletetaan tai halutaan löytyvän MPLS-verkkoihin tarkoitetusta suunnittelutyökalusta. Viimeinen kohta kertoo toiminnallisuus- ja skaalautuvuushaasteista, joihin MPLS:n on tekniikkana vastattava nykypäivänä. Kolmannessa osiossa tarkastellaan kahta eri suunnittelutyökalua, jotka on laadittu MPLS-verkkojen suunnitelua varten: WANDL-yhtiön julkaisemaa IP/MPLSView:ta ja Aria Networks Oy:n julkaisemaa iVNT:ta. Tässä osiossa käydään läpi näiden työkalujen toiminnallisuutta kertomalla erilaisista simulaatiomahdollisuuksista, joita kumpikin työkalu tarjoaa. Lisäksi kerrotaan mitä toimintoja ja protokollia näihin työkaluihin on mallinnettu, miten hyvin työkalut skaalautuvat kaupallisten MPLS-verkkojen tarpeisiin ja minkälaisita moduuleista työkalut on rakennettu. Työn lopussa on pohdittu näiden kolmen osion perusteella, että mitkä ominaisuudet tulisi ottaa huomioon MPLS-verkon suunnittelutyökalua laadittaessa ja millä tavalla nämä ominaisuudet tulisi toteuttaa työkalussa. Näiden jälkeen on työhön vielä tehty loppuyhteenveto, joka kertoo työ tuloksista ja mahdollisista jatkokehitysmahdollisuuksista. MPLS-verkon suunnittelu koostuu monesta eri vaiheesta, ja jokainen vaihe sisältää suuren määrän toiminnallisuusvaatimuksia. Nämä toiminnallisuusvaatimukset on mallinnettava MPLS-verkkojen suunnitteluun laaditussa työkalussa, jos halutaan että työkalu pystyy mallintamaan koko verkon suunnitteluprosessin alusta loppuun. Tärkeimmät toiminnallisuudet, jotka MPLS-verkon suunnittelutyökalun tulee omata ovat simulointimahdollisuudet MPLS-poluille (LSP:t), MPLS-TE:lle, eri VPN-tyypeille ja DiffServ-liikenteelle, sillä nämä ovat tärkeimmät toiminnallisuudet MPLS-verkoissa tänä päivänä. Jos edellä mainittu toiminnallisuus on toteutettu ja mallinnettu suunnittelutyökalussa ja työkalu osaa optimoida liikennettä hyvin saadaan verkon pääoma- ja operaationaaliset kulut laskemaan. MPLS-verkon suunnittelutyökalua laadittaessa on myös tärkeää ottaa huomioon työkalun skaalautuvuusominaisuudet. Runkoverkot voivat koostua tänä päivänä tuhansista solmuista ja sadoista tuhansista liikennevirroista, joten suunnitelutyökalun tulisi omata toiminnallisuutta joka automatisoi joitain vaiheita verkonsuunnittelussa, mikä mahdollistaa tämän kokoluokan verkkojen suunnittelun. Tällainen toiminnallisuus voisi esimerkiksi olla automatisoitu vuonohjaus ja verkkojen topologiakokonaisuuden vienti ja tuonti suunnittelutyökaluun ja siitä ulos. /Kir1

HDMM: deploying client and network-based distributed mobility management

Mobile operators are now facing the challenges posed by a huge data demand from users, mainly due to the introduction of modern portable devices and the success of mobile applications. Moreover, users are now capable to connect from different access networks and establish several active sessions simultaneously, while being mobile. This triggered the introduction of a new paradigm: the distributed mobility management (DMM) which aims at flattening the network and distributing the entities in charge of managing users' mobility. In this article, we review existing DMM proposals and describe a hybrid solution which benefits from combining a network-based and a client-based approach. We analyze the signaling cost and the handover latency of our proposal, comparing them with their centralized alternatives. We also include validation and performance results from experiments conducted with a Linux-based prototype, which show that achievable enhancements depend on the underlying network topology. We argue that the proposed hybrid DMM solution provides additional flexibility to the mobile network operators, which can decide when and how to combine these two approaches.The research leading to these results has received funding from the European Community’s Seventh Framework Programme (FP7-ICT-2009-5) under Grant agreement n. 258053 (MEDIEVAL project) and from the Spanish Government, MICINN, under research grant TIN2010-20136-C0

IP and ATM integration: A New paradigm in multi-service internetworking

ATM is a widespread technology adopted by many to support advanced data communication, in particular efficient Internet services provision. The expected challenges of multimedia communication together with the increasing massive utilization of IP-based applications urgently require redesign of networking solutions in terms of both new functionalities and enhanced performance. However, the networking context is affected by so many changes, and to some extent chaotic growth, that any approach based on a structured and complex top-down architecture is unlikely to be applicable. Instead, an approach based on finding out the best match between realistic service requirements and the pragmatic, intelligent use of technical opportunities made available by the product market seems more appropriate. By following this approach, innovations and improvements can be introduced at different times, not necessarily complying with each other according to a coherent overall design. With the aim of pursuing feasible innovations in the different networking aspects, we look at both IP and ATM internetworking in order to investigating a few of the most crucial topics/ issues related to the IP and ATM integration perspective. This research would also address various means of internetworking the Internet Protocol (IP) and Asynchronous Transfer Mode (ATM) with an objective of identifying the best possible means of delivering Quality of Service (QoS) requirements for multi-service applications, exploiting the meritorious features that IP and ATM have to offer. Although IP and ATM often have been viewed as competitors, their complementary strengths and limitations from a natural alliance that combines the best aspects of both the technologies. For instance, one limitation of ATM networks has been the relatively large gap between the speed of the network paths and the control operations needed to configure those data paths to meet changing user needs. IP\u27s greatest strength, on the other hand, is the inherent flexibility and its capacity to adapt rapidly to changing conditions. These complementary strengths and limitations make it natural to combine IP with ATM to obtain the best that each has to offer. Over time many models and architectures have evolved for IP/ATM internetworking and they have impacted the fundamental thinking in internetworking IP and ATM. These technologies, architectures, models and implementations will be reviewed in greater detail in addressing possible issues in integrating these architectures s in a multi-service, enterprise network. The objective being to make recommendations as to the best means of interworking the two in exploiting the salient features of one another to provide a faster, reliable, scalable, robust, QoS aware network in the most economical manner. How IP will be carried over ATM when a commercial worldwide ATM network is deployed is not addressed and the details of such a network still remain in a state of flux to specify anything concrete. Our research findings culminated with a strong recommendation that the best model to adopt, in light of the impending integrated service requirements of future multi-service environments, is an ATM core with IP at the edges to realize the best of both technologies in delivering QoS guarantees in a seamless manner to any node in the enterprise

Design and Development of a Framework for Traffic Management in a Global Manufacturing Enterprise: The American Standard Case Study

Managed Bandwidth Services (MBSs) use Quality of Service (QoS) guarantees to effectively control traffic flows and reduce network delay. In the past, the provision of MBS in a global manufacturing enterprise was a difficult task for network administrators. However, advances in recently emerging technologies, such as Multiprotocol Label Switching (MPLS), Generalized Multiprotocol Label Switching (GMPLS), Integrated Services (IntServ), Differentiated Services (DiffServ), and Constraint-based Routing (CBR), hold promise to make MBS implementation more manageable. QoS technologies, such as DiffServ and IntServ, offer the benefits of better application performance and delivery of reliable network service. As a consequence of network traffic loads, packet congestion and latency increases still exist and must be addressed by enterprises that intend to support an MBS solution. In this investigation, the author addressed an issue that is faced by many large manufacturing enterprises, i.e., the addition of latency and congestion sensitive traffic such as Voice-over-Internet Protocol (VoIP) to networks with limited bandwidth. The goal of this research was to provide global manufacturing enterprises with a model for bandwidth management in their offices and plants. This model was based on findings from a case study of traffic management at American Standard Companies

Performance Evaluation of MPLS in a Virtualized Service Provider Core (with/without Class of Service)

The last decade has witnessed a major change in the types of traffic scaling the Internet. With the development of real-time applications several challenges were faced within traditional IP networks. Some of these challenges are delay, increased costs faced by the service provider and customer, limited scalability, separate infrastructure costs and high administrative overheads to manage large networks etc. To combat these challenges, researchers have steered towards finding alternate solutions. Over the recent years, we have seen an introduction of a number of virtualized platforms and solutions being offered in the networking industry. Virtual load balancers, virtual firewalls, virtual routers, virtual intrusion detection and preventions systems are just a few examples within the Network Function Virtualization world! Service Providers are trying to find solutions where they could reduce operational expenses while at the same time meet the growing bandwidth demands of their customers. The main aim of this thesis is to evaluate the performance of voice, data and video traffic in a virtualized service provider core. Observations are made on how these traffic types perform on congested vs uncongested links and how Quality of Service treats traffic in a virtualized Service Provider Core using Round Trip Time as a performance metric. This thesis also tries to find if resiliency features such as Fast Reroute provide an additional advantage in failover scenarios within virtualized service provider cores. Juniper Networks vSRX are used to replicate virtual routers in a virtualized service provider core. Twenty-Four tests are carried out to gain a better understanding of how real-time applications and resiliency methods perform in virtualized networks. It is observed that a trade-off exists when introducing QoS on congested primary and secondary label switched paths. What can be observed thru the graphs is having Quality of Service enabled drops more packets however gives us the advantage of lower Round Trip Time for in-profile traffic. On the hand, having Quality of Service disabled, permits more traffic but leads to bandwidth contention between the three traffic classes leading to higher Round-Trip Times. The true benefit of QoS is seen in traffic congestion scenarios. The test bed built in this thesis, shows us that Fast Reroute does not add a significant benefit to aid in the reduction of packet loss during failover scenarios between primary and secondary paths. However, in certain scenarios fast reroute does seem to reduce packet loss specifically for data traffic

Architectures for the Future Networks and the Next Generation Internet: A Survey

Networking research funding agencies in the USA, Europe, Japan, and other countries are encouraging research on revolutionary networking architectures that may or may not be bound by the restrictions of the current TCP/IP based Internet. We present a comprehensive survey of such research projects and activities. The topics covered include various testbeds for experimentations for new architectures, new security mechanisms, content delivery mechanisms, management and control frameworks, service architectures, and routing mechanisms. Delay/Disruption tolerant networks, which allow communications even when complete end-to-end path is not available, are also discussed