2,856 research outputs found

    Design and Performance Analysis of Efficient Cooperative Wireless Communication Systems

    Get PDF
    Cooperative communication has recently become a key technology for modern wireless networks such as 3GPP long-term evolution and WiMAX, because in such networks the transmission rate, the communication reliability, and coverage problems could be improved in a cost-effective manner. This, however, faces many design challenges. First, cooperative transmission typically involves a relaying phase which requires extra resources. This may cause a reduction in the spectral efficiency. Second, extra control signaling increases the complexity of operation, which may limit practical implementation. In addition, a wireless channel is time-varying, mainly due to the multipath propagation. As a result, a careful design of efficient cooperative communication systems is required, not only to enhance the spectral efficiency and maintain the quality-of-service (QoS), but also to be practical. In this dissertation, we aim to address the challenges imposed by cooperative communication and wireless transmission, and design the efficient and distributed systems which can be practically implemented in existing wireless systems. The research work is divided into two main topics: 1) adaptive cooperative wireless systems with variable-rate transmission, and 2) cooperative wireless systems with a power consumption constraint. The first topic investigates how the spectral efficiency of cooperative wireless communication systems can be improved while maintaining the QoS in terms of bit error rate and outage probability. The spectral efficiency enhancement is achieved by using three techniques: adaptivity over the relay node (i.e., relay node is active or not), adaptivity over the modulation mode, and relay selection. Based on that, we propose several adaptive cooperative schemes for both the decode-and-forward (DF) and amplify-and-forward (AF) protocols. To evaluate these schemes, we provide performance analysis in terms of average spectral efficiency, average bit error rate (ABER), and outage probability over Rayleigh fading channels. We start with the single-relay cooperative system using DF protocol, in which two adaptive cooperative schemes with variable-rate transmission are proposed. The first scheme, called the minimum error rate scheme (MERS), aims to exploit the transmit diversity to improve the bit error rate. By trading the multiplexing gain against the diversity gain, we propose the second scheme, called the maximum spectral efficiency scheme (MSES), in which cooperative transmission is avoided whenever it is not beneficial. The MERS improves the ABER significantly and achieves equal or better average spectral efficiency compared to the fixed (i.e., non-adaptive) relaying scheme. In contrast, the MSES provides the best average spectral efficiency due to its ability to not only adapt to the channel variation but also to switch between cooperative and non-cooperative transmissions. To further increase the spectral efficiency, we then propose the third scheme, called variable-rate based relay selection (VRRS) scheme, in which a relay node is selected from among the available relay nodes, based on a predefined criterion. Furthermore, we propose two AF adaptive cooperative schemes, mainly to enhance the spectral efficiency. In the first scheme, we introduce a generalized switching policy (GSP) for a single-relay cooperative wireless system that exploits the variable-rate transmission and useful cooperative regions. The second scheme, called the AF efficient relay selection (AFERS) scheme, extends the GSP to also consider the relay selection technique. Analytical and simulation results verify that the AFERS scheme not only outperforms conventional direct transmission in terms of the average spectral efficiency, but also the AF fixed relaying and the outage-based AF adaptive cooperative scheme. The second topic investigates the fair power consumption of the relay nodes for AF cooperative wireless communication systems. The fairness is defined as to achieve equal power consumption over the relay nodes. We focus on how the relay selection process can be controlled in a distributed manner so that the power consumption of the relay nodes can be included in relay selection. We first introduce a simple closed-form expression for the weight coefficient used in order to achieve the considered fairness that depends only on the local average channel conditions of the relay path. We then derive closed-form expressions of the weighted outage probability and ABER and show that our proposed strategy not only has less complexity than the conventional centralized one but also provides better accuracy in distributing the total consumed power equally among the relay nodes without affecting the performance

    On-Demand Cooperation MAC Protocols with Optimal Diversity-Multiplexing Tradeoff

    Get PDF
    This paper presents access protocols with optimal Diversity-Multiplexing Tradeoff (DMT) performance in the context of IEEE 802.11-based mesh networks. The protocols are characterized by two main features: on-demand cooperation and selection of the best relay terminal. The on-demand characteristic refers to the ability of a destination terminal to ask for cooperation when it fails in decoding the message transmitted by a source terminal. This approach allows maximization of the spatial multiplexing gain. The selection of the best relay terminal allows maximization of the diversity order. Hence, the optimal DMT curve is achieved with these protocols

    A Simple Cooperative Diversity Method Based on Network Path Selection

    Full text link
    Cooperative diversity has been recently proposed as a way to form virtual antenna arrays that provide dramatic gains in slow fading wireless environments. However most of the proposed solutions require distributed space-time coding algorithms, the careful design of which is left for future investigation if there is more than one cooperative relay. We propose a novel scheme, that alleviates these problems and provides diversity gains on the order of the number of relays in the network. Our scheme first selects the best relay from a set of M available relays and then uses this best relay for cooperation between the source and the destination. We develop and analyze a distributed method to select the best relay that requires no topology information and is based on local measurements of the instantaneous channel conditions. This method also requires no explicit communication among the relays. The success (or failure) to select the best available path depends on the statistics of the wireless channel, and a methodology to evaluate performance for any kind of wireless channel statistics, is provided. Information theoretic analysis of outage probability shows that our scheme achieves the same diversity-multiplexing tradeoff as achieved by more complex protocols, where coordination and distributed space-time coding for M nodes is required, such as those proposed in [7]. The simplicity of the technique, allows for immediate implementation in existing radio hardware and its adoption could provide for improved flexibility, reliability and efficiency in future 4G wireless systems.Comment: To appear, IEEE JSAC, special issue on 4

    Selective Combining for Hybrid Cooperative Networks

    Full text link
    In this study, we consider the selective combining in hybrid cooperative networks (SCHCNs scheme) with one source node, one destination node and NN relay nodes. In the SCHCN scheme, each relay first adaptively chooses between amplify-and-forward protocol and decode-and-forward protocol on a per frame basis by examining the error-detecting code result, and NcN_c (1NcN1\leq N_c \leq N) relays will be selected to forward their received signals to the destination. We first develop a signal-to-noise ratio (SNR) threshold-based frame error rate (FER) approximation model. Then, the theoretical FER expressions for the SCHCN scheme are derived by utilizing the proposed SNR threshold-based FER approximation model. The analytical FER expressions are validated through simulation results.Comment: 27 pages, 8 figures, IET Communications, 201

    On Buffer-Aided Multiple-Access Relay Channel

    Full text link
    The paper treats uplink scenario where M user equipments (UEs) send to a Base Station (BS), possibly via a common Relay Station (RS) that is equipped with a buffer. This is a multiple-access relay channel (MARC) aided by a buffer. We devise a protocol in which the transmission mode is selected adaptively, using the buffer at the RS in order to maximize the average system throughput. We consider the general case in which the RS and the BS can have limits on the maximal number of transmitters that can be received over the multiple access channel. In each slot there are three type possible actions: (A1) multiple UEs transmit at rates that enable BS to decode them (A2) multiple UEs transmit, the BS can only decode the messages partially, while the RS completely; (A3) RS forwards the side information to BS about the partially decoded messages, which are going to be combined and decoded entirely at the BS, while simultaneously a number of UEs sends new messages to the BS. The results show that the adaptive selection of direct and buffer-aided relay transmissions leads to significant average throughput gains.Comment: 13 pages, 3 figures, accepted to IEEE Communications letter
    corecore