Nonintrusive reconnaissance of Cumberland Plateau soils with ground penetrating radar

Evaluation studies were conducted to determine which subsurface characteristics of the Cumberland Plateau could be identified by ground-penetrating radar (GPR). GPR technology offers great potential for non-intrusive mapping of the rhizosphere within this geological region. The Plateau\u27s soil is typically shallow (&asypm; 1 m), and predominately sandy loam overlaying sandstone bedrock, which is ideal for GPR investigations. Evaluation studies were conducted to determine which subsurface characteristics of the Cumberland Plateau could be identified by ground-penetrating radar (GPR). GPR technology offers great potential for non-intrusive mapping of the rhizosphere within this geological region. The Plateau\u27s soil is typically shallow (= 1 m), and predominately sandy loam overlaying sandstone bedrock, which is ideal for GPR investigations. Survey methodologies using GPR within the Cumberland Plateau region were developed and evaluated. Recommendations, specific for the desired subsurface targets, were made concerning survey procedures, equipment, and settings. Difficulties encountered using the various technologies are discussed along with suggested solutions. Promising agricultural and non-agricultural applications of this technology for this region are presented

Interferometric Synthetic Aperture Radar (InSAR) for Fine-resolution Basal Ice Sheet Imaging

This dissertation work was to examine the feasibility of InSAR through the ice sheets to create a fine resolution basal topography map and extraction of basal composition. InSAR was shown to be possible through the ice sheet, using data collected by the MCRDS radar around the NEEM drill site. Reflectivity maps were generated leading to the possibility of extracting useful basal composition data. Extraction of basal composition information was examined including estimating the roughness of basal topography and removing the effects of local slope

Determining Amplitude Corrections for the Assessment of Surface Roughness Within A Lidar Footprint

The research presented in this thesis is under the context of the OSIRIS-REx mission, a NASA led asteroid sample return mission being launched in 2016 towards the asteroid 101955 Bennu. Aboard the spacecraft is the OSIRIS-REx Laser Altimeter (OLA), which is using the backscattered intensity for instrument calibration. By applying the novel solution of amplitude correction, it is possible to gain additional functionality out of this instrument. This thesis presents a simulation written by the author that accurately models laser altimeter performance. The simulation is used successfully to study OLA’s receiver to reduce error in the range measurements and to remove the effects of large-scale topographic features on the amplitude. The remaining amplitude variations will be interpreted as mineralogical or morphological variations that may impact the viability or the desirability of the site for sample collection

Wideband mobile propagation channels: Modelling measurements and characterisation for microcellular environments

EThOS - Electronic Theses Online ServiceGBUnited Kingdo

NDT for the diagnosis of modern, historical and archaeological structures

This thesis has been developed with the aim to explore thoroughly potential and limit of the GPR and ERT methods for monitoring heterogeneous structures where different construction materials are combined together. Firstly we analysed the GPR response, in various construction materials related to different modern, historical or archaeological structures. In particular, three real examples were investigated during the thesis, namely: the Pyramid of Caius Cestius, the Passage of Commodus and the Colle Oppio Ninpheum, all in Rome. According to the different types of material and frequency antennas, different GPR responses and therefore dissimilar degree of resolution and of attenuation was obtained. In light of this, the interposition between the surface of the investigated medium and the GPR antenna of a dielectric material (e.g. Plexiglas) was performed in order to improve the resolution. Furthermore, an application of the GPR and ERT methods for monitoring a load test executed on masonry samples was presented. This panels were built up in the laboratory controlled conditions using tuff and bricks (widespread materials employed in Italy for decades for masonry buildings) and also were reproduced in the phase of theoretical modeling. The laboratory samples are reinforced with a conductive fibre fabric, where a high-conductive material (steel wires) is combined together with a dielectric material (basalt fibre). In order to improve the sample-antenna coupling in the presence of conductive reinforcements, a Plexiglas (polimetilmetacrilato - PMMA) plate was added underneath a 2 GHz antenna. GPR data were acquired along profiles spaced 0.1 m apart and ERT measurements were executed on a 0.1 m regular spaced grid with a dipole-dipole array operating in a three-dimensional configuration. GPR datasets were also analysed in non-conventional mode, by means of the picking of the reflection time of the EM wave from the rear face of the wall samples. Results show that GPR and electrical resistivity tomography were both able to detect fractures and weakness zones caused by the load application, even though with a higher resolution for the georadar with respect to the geoelectrical method. Moreover, mapping the GPR data in terms of the dielectric constant and mean absolute amplitude is particularly diagnostic to detect the effective fracturing pattern, after the application of the diagonal load. Therefore, GPR and ERT methods can reduce the degree of uncertainty in the detection of fractures, voids or cavities, with respect to the standard processing, by the combined analysis of radargrams, time-slices and resistivity ERT models. Furthermore, for the GPR laboratory data acquired directly on the reinforced face of samples, it is demonstrated how interposing a layer of dielectric material between the antenna and the structure can substantially improve the antenna coupling and consequently the capability to detect fractures and to reach the rear face of the sample, despite losing resolution in the case of shallow high-conductive layers. Finally, three-dimensional synthetic simulations on the same samples validate the experimental evidences. Therefore, we demonstrate that this approach can be a reliable tool to monitor static load tests and it can be further extended to the whole load cycle (before, during and after the experiment)

USSR Space Life Sciences Digest, issue 6

This is the sixth issue of NASA's USSR Space Life Sciences Digest. It contains abstracts of 54 papers recently published in Russian language periodicals and bound collections and of 10 new Soviet monographs. Selected abstracts are illustrated with figures and tables from the original. Additional features include a table of Soviet EVAs and information about English translations of Soviet materials available to readers. The topics covered in this issue have been identified as relevant to 26 areas of aerospace medicine and space biology. These areas are adaptation, biospherics, body fluids, botany, cardiovascular and respiratory systems, developmental biology, endocrinology, enzymology, exobiology, genetics, habitability and environment effects, health and medical treatment, hematology, human performance, immunology, life support systems, mathematical modeling, metabolism., microbiology, morphology and cytology, musculoskeletal system, neurophysiology, nutrition, perception, personnel selection, psychology, radiobiology, reproductive biology, and space medicine

Biomedical Engineering

Biomedical engineering is currently relatively wide scientific area which has been constantly bringing innovations with an objective to support and improve all areas of medicine such as therapy, diagnostics and rehabilitation. It holds a strong position also in natural and biological sciences. In the terms of application, biomedical engineering is present at almost all technical universities where some of them are targeted for the research and development in this area. The presented book brings chosen outputs and results of research and development tasks, often supported by important world or European framework programs or grant agencies. The knowledge and findings from the area of biomaterials, bioelectronics, bioinformatics, biomedical devices and tools or computer support in the processes of diagnostics and therapy are defined in a way that they bring both basic information to a reader and also specific outputs with a possible further use in research and development