Enhanced genetic algorithm-based fuzzy multiobjective strategy to multiproduct batch plant design

This paper addresses the problem of the optimal design of batch plants with imprecise demands in product amounts. The design of such plants necessary involves how equipment may be utilized, which means that plant scheduling and production must constitute a basic part of the design problem. Rather than resorting to a traditional probabilistic approach for modeling the imprecision on product demands, this work proposes an alternative treatment by using fuzzy concepts. The design problem is tackled by introducing a new approach based on a multiobjective genetic algorithm, combined wit the fuzzy set theory for computing the objectives as fuzzy quantities. The problem takes into account simultaneous maximization of the fuzzy net present value and of two other performance criteria, i.e. the production delay/advance and a flexibility index. The delay/advance objective is computed by comparing the fuzzy production time for the products to a given fuzzy time horizon, and the flexibility index represents the additional fuzzy production that the plant would be able to produce. The multiobjective optimization provides the Pareto's front which is a set of scenarios that are helpful for guiding the decision's maker in its final choices. About the solution procedure, a genetic algorithm was implemented since it is particularly well-suited to take into account the arithmetic of fuzzy numbers. Furthermore because a genetic algorithm is working on populations of potential solutions, this type of procedure is well adapted for multiobjective optimization

Decision support for build-to-order supply chain management through multiobjective optimization

This is the post-print version of the final paper published in International Journal of Production Economics. The published article is available from the link below. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. Copyright @ 2010 Elsevier B.V.This paper aims to identify the gaps in decision-making support based on multiobjective optimization (MOO) for build-to-order supply chain management (BTO-SCM). To this end, it reviews the literature available on modelling build-to-order supply chains (BTO-SC) with the focus on adopting MOO techniques as a decision support tool. The literature has been classified based on the nature of the decisions in different part of the supply chain, and the key decision areas across a typical BTO-SC are discussed in detail. Available software packages suitable for supporting decision making in BTO supply chains are also identified and their related solutions are outlined. The gap between the modelling and optimization techniques developed in the literature and the decision support needed in practice are highlighted. Future research directions to better exploit the decision support capabilities of MOO are proposed. These include: reformulation of the extant optimization models with a MOO perspective, development of decision supports for interfaces not involving manufacturers, development of scenarios around service-based objectives, development of efficient solution tools, considering the interests of each supply chain party as a separate objective to account for fair treatment of their requirements, and applying the existing methodologies on real-life data sets.Brunel Research Initiative and Enterprise Fund (BRIEF

Decision support for build-to-order supply chain management through multiobjective optimization

This paper aims to identify the gaps in decision-making support based on multiobjective optimization for build-to-order supply chain management (BTOSCM). To this end, it reviews the literature available on modelling build-to-order supply chains (BTO-SC) with the focus on adopting multiobjective optimization (MOO) techniques as a decision support tool. The literature has been classified based on the nature of the decisions in different part of the supply chain, and the key decision areas across a typical BTO-SC are discussed in detail. Available software packages suitable for supporting decision making in BTO supply chains are also identified and their related solutions are outlined. The gap between the modelling and optimization techniques developed in the literature and the decision support needed in practice are highlighted and future research directions to better exploit the decision support capabilities of MOO are proposed

A fuzzy multiobjective algorithm for multiproduct batch plant: Application to protein production

This paper addresses the problem of the optimal design of batch plants with imprecise demands and proposes an alternative treatment of the imprecision by using fuzzy concepts. For this purpose, we extended a multiobjective genetic algorithm (MOGA) developed in previousworks, taking into account simultaneously maximization of the net present value (NPV) and two other performance criteria, i.e. the production delay/advance and a flexibility criterion. The former is computed by comparing the fuzzy computed production time to a given fuzzy production time horizon and the latter is based on the additional fuzzy demand that the plant is able to produce. The methodology provides a set of scenarios that are helpful to the decision’s maker and constitutes a very promising framework for taken imprecision into account in new product development stage

A similarity-based cooperative co-evolutionary algorithm for dynamic interval multi-objective optimization problems

The file attached to this record is the author's final peer reviewed version. The Publisher's final version can be found by following the DOI link.Dynamic interval multi-objective optimization problems (DI-MOPs) are very common in real-world applications. However, there are few evolutionary algorithms that are suitable for tackling DI-MOPs up to date. A framework of dynamic interval multi-objective cooperative co-evolutionary optimization based on the interval similarity is presented in this paper to handle DI-MOPs. In the framework, a strategy for decomposing decision variables is first proposed, through which all the decision variables are divided into two groups according to the interval similarity between each decision variable and interval parameters. Following that, two sub-populations are utilized to cooperatively optimize decision variables in the two groups. Furthermore, two response strategies, rgb0.00,0.00,0.00i.e., a strategy based on the change intensity and a random mutation strategy, are employed to rapidly track the changing Pareto front of the optimization problem. The proposed algorithm is applied to eight benchmark optimization instances rgb0.00,0.00,0.00as well as a multi-period portfolio selection problem and compared with five state-of-the-art evolutionary algorithms. The experimental results reveal that the proposed algorithm is very competitive on most optimization instances

Qualitative Characteristics and Quantitative Measures of Solution's Reliability in Discrete Optimization: Traditional Analytical Approaches, Innovative Computational Methods and Applicability

The purpose of this thesis is twofold. The first and major part is devoted to sensitivity analysis of various discrete optimization problems while the second part addresses methods applied for calculating measures of solution stability and solving multicriteria discrete optimization problems. Despite numerous approaches to stability analysis of discrete optimization problems two major directions can be single out: quantitative and qualitative. Qualitative sensitivity analysis is conducted for multicriteria discrete optimization problems with minisum, minimax and minimin partial criteria. The main results obtained here are necessary and sufficient conditions for different stability types of optimal solutions (or a set of optimal solutions) of the considered problems. Within the framework of quantitative direction various measures of solution stability are investigated. A formula for a quantitative characteristic called stability radius is obtained for the generalized equilibrium situation invariant to changes of game parameters in the case of the H¨older metric. Quality of the problem solution can also be described in terms of robustness analysis. In this work the concepts of accuracy and robustness tolerances are presented for a strategic game with a finite number of players where initial coefficients (costs) of linear payoff functions are subject to perturbations. Investigation of stability radius also aims to devise methods for its calculation. A new metaheuristic approach is derived for calculation of stability radius of an optimal solution to the shortest path problem. The main advantage of the developed method is that it can be potentially applicable for calculating stability radii of NP-hard problems. The last chapter of the thesis focuses on deriving innovative methods based on interactive optimization approach for solving multicriteria combinatorial optimization problems. The key idea of the proposed approach is to utilize a parameterized achievement scalarizing function for solution calculation and to direct interactive procedure by changing weighting coefficients of this function. In order to illustrate the introduced ideas a decision making process is simulated for three objective median location problem. The concepts, models, and ideas collected and analyzed in this thesis create a good and relevant grounds for developing more complicated and integrated models of postoptimal analysis and solving the most computationally challenging problems related to it.Siirretty Doriast

Minimizing water and energy consumptions in water and heat exchange networks.

This study presents a mathematical programming formulation for the design of water and heat exchangers networks based on a two-step methodology. First, an MILP (mixed integer linear programming) procedure is used to solve the water and energy allocation problem regarding several objectives. The first step of the design method involves four criteria to be taken into account., ie, fresh water consumption (F1), energy consumption (F2), interconnection number (F3) and number of heat exchangers (F4). The multiobjective optimization Min [F1, F2] is solved by the so-called ɛ-constraint method and leads to several Pareto fronts for fixed numbers of connections and heat exchangers. The second step consists in improving the best results of the first phase with energy integration into the water network. This stage is solved by an MINLP procedure in order to minimize an objective cost function. Two examples reported in the dedicated literature serve as test bench cases to apply the proposed two-step approach. The results show that the simultaneous consideration of the abovementioned objectives is more realistic than the only minimization of fresh water consumption. Indeed, the optimal network does not necessarily correspond to the structure that reaches the fresh water target. For a real paper mill plant, energy consumption decreases of almost 20% as compared with previous studies

Robust Solutions to Uncertain Multiobjective Programs

Decision making in the presence of uncertainty and multiple conflicting objec-tives is a real-life issue, especially in the fields of engineering, public policy making, business management, and many others. The conflicting goals may originate from the variety of ways to assess a system’s performance such as cost, safety, and affordability, while uncertainty may result from inaccurate or unknown data, limited knowledge, or future changes in the environment. To address optimization problems that incor-porate these two aspects, we focus on the integration of robust and multiobjective optimization. Although the uncertainty may present itself in many different ways due to a diversity of sources, we address the situation of objective-wise uncertainty only in the coefficients of the objective functions, which is drawn from a finite set of scenarios. Among the numerous concepts of robust solutions that have been proposed and de-veloped, we concentrate on a strict concept referred to as highly robust efficiency in which a feasible solution is highly robust efficient provided that it is efficient with respect to every realization of the uncertain data. The main focus of our study is uncertain multiobjective linear programs (UMOLPs), however, nonlinear problems are discussed as well. In the course of our study, we develop properties of the highly robust efficient set, provide its characterization using the cone of improving directions associated with the UMOLP, derive several bound sets on the highly robust efficient set, and present a robust counterpart for a class of UMOLPs. As various results rely on the polar and strict polar of the cone of improving directions, as well as the acuteness of this cone, we derive properties and closed-form representations of the (strict) polar and also propose methods to verify the property of acuteness. Moreover, we undertake the computation of highly robust efficient solutions. We provide methods for checking whether or not the highly robust efficient set is empty, computing highly robust efficient points, and determining whether a given solution of interest is highly robust efficient. An application in the area of bank management is included

The Kalai-Smorodinski solution for many-objective Bayesian optimization

An ongoing aim of research in multiobjective Bayesian optimization is to extend its applicability to a large number of objectives. While coping with a limited budget of evaluations, recovering the set of optimal compromise solutions generally requires numerous observations and is less interpretable since this set tends to grow larger with the number of objectives. We thus propose to focus on a specific solution originating from game theory, the Kalai-Smorodinsky solution, which possesses attractive properties. In particular, it ensures equal marginal gains over all objectives. We further make it insensitive to a monotonic transformation of the objectives by considering the objectives in the copula space. A novel tailored algorithm is proposed to search for the solution, in the form of a Bayesian optimization algorithm: sequential sampling decisions are made based on acquisition functions that derive from an instrumental Gaussian process prior. Our approach is tested on four problems with respectively four, six, eight, and nine objectives. The method is available in the Rpackage GPGame available on CRAN at https://cran.r-project.org/package=GPGame

Bi-objective modeling approach for repairing multiple feature infrastructure systems

A bi-objective decision aid model for planning long-term maintenance of infrastructure systems is presented, oriented to interventions on their constituent elements, with two upgrade levels possible for each element (partial/full repairs). The model aims at maximizing benefits and minimizing costs, and its novelty is taking into consideration, and combining, the system/element structure, volume discounts, and socioeconomic factors. The model is tested with field data from 229 sidewalks (systems) and compared to two simpler repair policies, of allowing only partial or full repairs. Results show that the efficiency gains are greater in the lower mid-range budget region. The proposed modeling approach is an innovative tool to optimize cost/benefits for the various repair options and analyze the respective trade-offs.info:eu-repo/semantics/publishedVersio