Optimizing SIMD execution in HW/SW co-designed processors

SIMD accelerators are ubiquitous in microprocessors from different computing domains. Their high compute power and hardware simplicity improve overall performance in an energy efficient manner. Moreover, their replicated functional units and simple control mechanism make them amenable to scaling to higher vector lengths. However, code generation for these accelerators has been a challenge from the days of their inception. Compilers generate vector code conservatively to ensure correctness. As a result they lose significant vectorization opportunities and fail to extract maximum benefits out of SIMD accelerators. This thesis proposes to vectorize the program binary at runtime in a speculative manner, in addition to the compile time static vectorization. There are different environments that support runtime profiling and optimization support required for dynamic vectorization, one of most prominent ones being: 1) Dynamic Binary Translators and Optimizers (DBTO) and 2) Hardware/Software (HW/SW) Co-designed Processors. HW/SW co-designed environment provides several advantages over DBTOs like transparent incorporations of new hardware features, binary compatibility, etc. Therefore, we use HW/SW co-designed environment to assess the potential of speculative dynamic vectorization. Furthermore, we analyze vector code generation for wider vector units and find out that even though SIMD accelerators are amenable to scaling from the hardware point of view, vector code generation at higher vector length is even more challenging. The two major factors impeding vectorization for wider SIMD units are: 1) Reduced dynamic instruction stream coverage for vectorization and 2) Large number of permutation instructions. To solve the first problem we propose Variable Length Vectorization that iteratively vectorizes for multiple vector lengths to improve dynamic instruction stream coverage. Secondly, to reduce the number of permutation instructions we propose Selective Writing that selectively writes to different parts of a vector register and avoids permutations. Finally, we tackle the problem of leakage energy in SIMD accelerators. Since SIMD accelerators consume significant amount of real estate on the chip, they become the principle source of leakage if not utilized judiciously. Power gating is one of the most widely used techniques to reduce leakage energy of functional units. However, power gating has its own energy and performance overhead associated with it. We propose to selectively devectorize the vector code when higher SIMD lanes are used intermittently. This selective devectorization keeps the higher SIMD lanes idle and power gated for maximum duration. Therefore, resulting in overall leakage energy reduction.Postprint (published version

Performance and power optimizations in chip multiprocessors for throughput-aware computation

The so-called "power (or power density) wall" has caused core frequency (and single-thread performance) to slow down, giving rise to the era of multi-core/multi-thread processors. For example, the IBM POWER4 processor, released in 2001, incorporated two single-thread cores into the same chip. In 2010, IBM released the POWER7 processor with eight 4-thread cores in the same chip, for a total capacity of 32 execution contexts. The ever increasing number of cores and threads gives rise to new opportunities and challenges for software and hardware architects. At software level, applications can benefit from the abundant number of execution contexts to boost throughput. But this challenges programmers to create highly-parallel applications and operating systems capable of scheduling them correctly. At hardware level, the increasing core and thread count puts pressure on the memory interface, because memory bandwidth grows at a slower pace ---phenomenon known as the "bandwidth (or memory) wall". In addition to memory bandwidth issues, chip power consumption rises due to manufacturers' difficulty to lower operating voltages sufficiently every processor generation. This thesis presents innovations to improve bandwidth and power consumption in chip multiprocessors (CMPs) for throughput-aware computation: a bandwidth-optimized last-level cache (LLC), a bandwidth-optimized vector register file, and a power/performance-aware thread placement heuristic. In contrast to state-of-the-art LLC designs, our organization avoids data replication and, hence, does not require keeping data coherent. Instead, the address space is statically distributed all over the LLC (in a fine-grained interleaving fashion). The absence of data replication increases the cache effective capacity, which results in better hit rates and higher bandwidth compared to a coherent LLC. We use double buffering to hide the extra access latency due to the lack of data replication. The proposed vector register file is composed of thousands of registers and organized as an aggregation of banks. We leverage such organization to attach small special-function "local computation elements" (LCEs) to each bank. This approach ---referred to as the "processor-in-regfile" (PIR) strategy--- overcomes the limited number of register file ports. Because each LCE is a SIMD computation element and all of them can proceed concurrently, the PIR strategy constitutes a highly-parallel super-wide-SIMD device (ideal for throughput-aware computation). Finally, we present a heuristic to reduce chip power consumption by dynamically placing software (application) threads across hardware (physical) threads. The heuristic gathers chip-level power and performance information at runtime to infer characteristics of the applications being executed. For example, if an application's threads share data, the heuristic may decide to place them in fewer cores to favor inter-thread data sharing and communication. In such case, the number of active cores decreases, which is a good opportunity to switch off the unused cores to save power. It is increasingly harder to find bulletproof (micro-)architectural solutions for the bandwidth and power scalability limitations in CMPs. Consequently, we think that architects should attack those problems from different flanks simultaneously, with complementary innovations. This thesis contributes with a battery of solutions to alleviate those problems in the context of throughput-aware computation: 1) proposing a bandwidth-optimized LLC; 2) proposing a bandwidth-optimized register file organization; and 3) proposing a simple technique to improve power-performance efficiency.El excesivo consumo de potencia de los procesadores actuales ha desacelerado el incremento en la frecuencia operativa de los mismos para dar lugar a la era de los procesadores con múltiples núcleos y múltiples hilos de ejecución. Por ejemplo, el procesador POWER7 de IBM, lanzado al mercado en 2010, incorpora ocho núcleos en el mismo chip, con cuatro hilos de ejecución por núcleo. Esto da lugar a nuevas oportunidades y desafíos para los arquitectos de software y hardware. A nivel de software, las aplicaciones pueden beneficiarse del abundante número de núcleos e hilos de ejecución para aumentar el rendimiento. Pero esto obliga a los programadores a crear aplicaciones altamente paralelas y sistemas operativos capaces de planificar correctamente la ejecución de las mismas. A nivel de hardware, el creciente número de núcleos e hilos de ejecución ejerce presión sobre la interfaz de memoria, ya que el ancho de banda de memoria crece a un ritmo más lento. Además de los problemas de ancho de banda de memoria, el consumo de energía del chip se eleva debido a la dificultad de los fabricantes para reducir suficientemente los voltajes de operación entre generaciones de procesadores. Esta tesis presenta innovaciones para mejorar el ancho de banda y consumo de energía en procesadores multinúcleo en el ámbito de la computación orientada a rendimiento ("throughput-aware computation"): una memoria caché de último nivel ("last-level cache" o LLC) optimizada para ancho de banda, un banco de registros vectorial optimizado para ancho de banda, y una heurística para planificar la ejecución de aplicaciones paralelas orientada a mejorar la eficiencia del consumo de potencia y desempeño. En contraste con los diseños de LLC de última generación, nuestra organización evita la duplicación de datos y, por tanto, no requiere de técnicas de coherencia. El espacio de direcciones de memoria se distribuye estáticamente en la LLC con un entrelazado de grano fino. La ausencia de replicación de datos aumenta la capacidad efectiva de la memoria caché, lo que se traduce en mejores tasas de acierto y mayor ancho de banda en comparación con una LLC coherente. Utilizamos la técnica de "doble buffering" para ocultar la latencia adicional necesaria para acceder a datos remotos. El banco de registros vectorial propuesto se compone de miles de registros y se organiza como una agregación de bancos. Incorporamos a cada banco una pequeña unidad de cómputo de propósito especial ("local computation element" o LCE). Este enfoque ---que llamamos "computación en banco de registros"--- permite superar el número limitado de puertos en el banco de registros. Debido a que cada LCE es una unidad de cómputo con soporte SIMD ("single instruction, multiple data") y todas ellas pueden proceder de forma concurrente, la estrategia de "computación en banco de registros" constituye un dispositivo SIMD altamente paralelo. Por último, presentamos una heurística para planificar la ejecución de aplicaciones paralelas orientada a reducir el consumo de energía del chip, colocando dinámicamente los hilos de ejecución a nivel de software entre los hilos de ejecución a nivel de hardware. La heurística obtiene, en tiempo de ejecución, información de consumo de potencia y desempeño del chip para inferir las características de las aplicaciones. Por ejemplo, si los hilos de ejecución a nivel de software comparten datos significativamente, la heurística puede decidir colocarlos en un menor número de núcleos para favorecer el intercambio de datos entre ellos. En tal caso, los núcleos no utilizados se pueden apagar para ahorrar energía. Cada vez es más difícil encontrar soluciones de arquitectura "a prueba de balas" para resolver las limitaciones de escalabilidad de los procesadores actuales. En consecuencia, creemos que los arquitectos deben atacar dichos problemas desde diferentes flancos simultáneamente, con innovaciones complementarias

Chapter One – An Overview of Architecture-Level Power- and Energy-Efficient Design Techniques

Power dissipation and energy consumption became the primary design constraint for almost all computer systems in the last 15 years. Both computer architects and circuit designers intent to reduce power and energy (without a performance degradation) at all design levels, as it is currently the main obstacle to continue with further scaling according to Moore's law. The aim of this survey is to provide a comprehensive overview of power- and energy-efficient “state-of-the-art” techniques. We classify techniques by component where they apply to, which is the most natural way from a designer point of view. We further divide the techniques by the component of power/energy they optimize (static or dynamic), covering in that way complete low-power design flow at the architectural level. At the end, we conclude that only a holistic approach that assumes optimizations at all design levels can lead to significant savings.Peer ReviewedPostprint (published version

Optimal digital system design in deep submicron technology

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2006.Includes bibliographical references (p. 165-174).The optimization of a digital system in deep submicron technology should be done with two basic principles: energy waste reduction and energy-delay tradeoff. Increased energy resources obtained through energy waste reduction are utilized through energy-delay tradeoffs. The previous practice of obliviously pursuing performance has led to the rapid increase in energy consumption. While energy waste due to unnecessary switching could be reduced with small increases in logic complexity, leakage energy waste still remains as a major design challenge. We find that fine-grain dynamic leakage reduction (FG-DLR), turning off small subblocks for short idle intervals, is the key for successful leakage energy saving. We introduce an FG-DLR circuit technique, Leakage Biasing, which uses leakage currents themselves to bias the circuit into the minimum leakage state, and apply it to primary SRAM arrays for bitline leakage reduction (Leakage-Biased Bitlines) and to domino logic (Leakage-Biased Domino). We also introduce another FG-DLR circuit technique, Dynamic Resizing, which dynamically downsizes transistors on idle paths while maintaining the performance along active critical paths, and apply it to static CMOS circuits.(cont.) We show that significant energy reduction can be achieved at the same computation throughput and communication bandwidth by pipelining logic gates and wires. We find that energy saved by pipelining datapaths is eventually limited by latch energy overhead, leading to a power-optimal pipelining. Structuring global wires into on-chip networks provides a better environment for pipelining and leakage energy saving. We show that the energy-efficiency increase through replacement with dynamically packet-routed networks is bounded by router energy overhead. Finally, we provide a way of relaxing the peak power constraint. We evaluate the use of Activity Migration (AM) for hot spot removal. AM spreads heat by transporting computation to a different location on the die. We show that AM can be used either to increase the power that can be dissipated by a given package, or to lower the operating temperature and hence the operating energy.by Seongmoo Heo.Ph.D

Code optimizations for narrow bitwidth architectures

This thesis takes a HW/SW collaborative approach to tackle the problem of computational inefficiency in a holistic manner. The hardware is redesigned by restraining the datapath to merely 16-bit datawidth (integer datapath only) to provide an extremely simple, low-cost, low-complexity execution core which is best at executing the most common case efficiently. This redesign, referred to as the Narrow Bitwidth Architecture, is unique in that although the datapath is squeezed to 16-bits, it continues to offer the advantage of higher memory addressability like the contemporary wider datapath architectures. Its interface to the outside (software) world is termed as the Narrow ISA. The software is responsible for efficiently mapping the current stack of 64-bit applications onto the 16-bit hardware. However, this HW/SW approach introduces a non-negligible penalty both in dynamic code-size and performance-impact even with a reasonably smart code-translator that maps the 64- bit applications on to the 16-bit processor. The goal of this thesis is to design a software layer that harnesses the power of compiler optimizations to assuage this negative performance penalty of the Narrow ISA. More specifically, this thesis focuses on compiler optimizations targeting the problem of how to compile a 64-bit program to a 16-bit datapath machine from the perspective of Minimum Required Computations (MRC). Given a program, the notion of MRC aims to infer how much computation is really required to generate the same (correct) output as the original program. Approaching perfect MRC is an intrinsically ambitious goal and it requires oracle predictions of program behavior. Towards this end, the thesis proposes three heuristic-based optimizations to closely infer the MRC. The perspective of MRC unfolds into a definition of productiveness - if a computation does not alter the storage location, it is non-productive and hence, not necessary to be performed. In this research, the definition of productiveness has been applied to different granularities of the data-flow as well as control-flow of the programs. Three profile-based, code optimization techniques have been proposed : 1. Global Productiveness Propagation (GPP) which applies the concept of productiveness at the granularity of a function. 2. Local Productiveness Pruning (LPP) applies the same concept but at a much finer granularity of a single instruction. 3. Minimal Branch Computation (MBC) is an profile-based, code-reordering optimization technique which applies the principles of MRC for conditional branches. The primary aim of all these techniques is to reduce the dynamic code footprint of the Narrow ISA. The first two optimizations (GPP and LPP) perform the task of speculatively pruning the non-productive (useless) computations using profiles. Further, these two optimization techniques perform backward traversal of the optimization regions to embed checks into the nonspeculative slices, hence, making them self-sufficient to detect mis-speculation dynamically. The MBC optimization is a use case of a broader concept of a lazy computation model. The idea behind MBC is to reorder the backslices containing narrow computations such that the minimal necessary computations to generate the same (correct) output are performed in the most-frequent case; the rest of the computations are performed only when necessary. With the proposed optimizations, it can be concluded that there do exist ways to smartly compile a 64-bit application to a 16- bit ISA such that the overheads are considerably reduced.Esta tesis deriva su motivación en la inherente ineficiencia computacional de los procesadores actuales: a pesar de que muchas aplicaciones contemporáneas tienen unos requisitos de ancho de bits estrechos (aplicaciones de enteros, de red y multimedia), el hardware acaba utilizando el camino de datos completo, utilizando más recursos de los necesarios y consumiendo más energía. Esta tesis utiliza una aproximación HW/SW para atacar, de forma íntegra, el problema de la ineficiencia computacional. El hardware se ha rediseñado para restringir el ancho de bits del camino de datos a sólo 16 bits (únicamente el de enteros) y ofrecer así un núcleo de ejecución simple, de bajo consumo y baja complejidad, el cual está diseñado para ejecutar de forma eficiente el caso común. El rediseño, llamado en esta tesis Arquitectura de Ancho de Bits Estrecho (narrow bitwidth en inglés), es único en el sentido que aunque el camino de datos se ha estrechado a 16 bits, el sistema continúa ofreciendo las ventajas de direccionar grandes cantidades de memoria tal como procesadores con caminos de datos más anchos (64 bits actualmente). Su interface con el mundo exterior se denomina ISA estrecho. En nuestra propuesta el software es responsable de mapear eficientemente la actual pila software de las aplicaciones de 64 bits en el hardware de 16 bits. Sin embargo, esta aproximación HW/SW introduce penalizaciones no despreciables tanto en el tamaño del código dinámico como en el rendimiento, incluso con un traductor de código inteligente que mapea las aplicaciones de 64 bits en el procesador de 16 bits. El objetivo de esta tesis es el de diseñar una capa software que aproveche la capacidad de las optimizaciones para reducir el efecto negativo en el rendimiento del ISA estrecho. Concretamente, esta tesis se centra en optimizaciones que tratan el problema de como compilar programas de 64 bits para una máquina de 16 bits desde la perspectiva de las Mínimas Computaciones Requeridas (MRC en inglés). Dado un programa, la noción de MRC intenta deducir la cantidad de cómputo que realmente se necesita para generar la misma (correcta) salida que el programa original. Aproximarse al MRC perfecto es una meta intrínsecamente ambiciosa y que requiere predicciones perfectas de comportamiento del programa. Con este fin, la tesis propone tres heurísticas basadas en optimizaciones que tratan de inferir el MRC. La utilización de MRC se desarrolla en la definición de productividad: si un cálculo no altera el dato que ya había almacenado, entonces no es productivo y por lo tanto, no es necesario llevarlo a cabo. Se han propuesto tres optimizaciones del código basadas en profile: 1. Propagación Global de la Productividad (GPP en inglés) aplica el concepto de productividad a la granularidad de función. 2. Poda Local de Productividad (LPP en inglés) aplica el mismo concepto pero a una granularidad mucho más fina, la de una única instrucción. 3. Computación Mínima del Salto (MBC en inglés) es una técnica de reordenación de código que aplica los principios de MRC a los saltos condicionales. El objetivo principal de todas esta técnicas es el de reducir el tamaño dinámico del código estrecho. Las primeras dos optimizaciones (GPP y LPP) realizan la tarea de podar especulativamente las computaciones no productivas (innecesarias) utilizando profiles. Además, estas dos optimizaciones realizan un recorrido hacia atrás de las regiones a optimizar para añadir chequeos en el código no especulativo, haciendo de esta forma la técnica autosuficiente para detectar, dinámicamente, los casos de fallo en la especulación. La idea de la optimización MBC es reordenar las instrucciones que generan el salto condicional tal que las mínimas computaciones que general la misma (correcta) salida se ejecuten en la mayoría de los casos; el resto de las computaciones se ejecutarán sólo cuando sea necesario

Circuits and Systems Advances in Near Threshold Computing

Modern society is witnessing a sea change in ubiquitous computing, in which people have embraced computing systems as an indispensable part of day-to-day existence. Computation, storage, and communication abilities of smartphones, for example, have undergone monumental changes over the past decade. However, global emphasis on creating and sustaining green environments is leading to a rapid and ongoing proliferation of edge computing systems and applications. As a broad spectrum of healthcare, home, and transport applications shift to the edge of the network, near-threshold computing (NTC) is emerging as one of the promising low-power computing platforms. An NTC device sets its supply voltage close to its threshold voltage, dramatically reducing the energy consumption. Despite showing substantial promise in terms of energy efficiency, NTC is yet to see widescale commercial adoption. This is because circuits and systems operating with NTC suffer from several problems, including increased sensitivity to process variation, reliability problems, performance degradation, and security vulnerabilities, to name a few. To realize its potential, we need designs, techniques, and solutions to overcome these challenges associated with NTC circuits and systems. The readers of this book will be able to familiarize themselves with recent advances in electronics systems, focusing on near-threshold computing