Distributed data cache designs for clustered VLIW processors

Wire delays are a major concern for current and forthcoming processors. One approach to deal with this problem is to divide the processor into semi-independent units referred to as clusters. A cluster usually consists of a local register file and a subset of the functional units, while the L1 data cache typically remains centralized in What we call partially distributed architectures. However, as technology evolves, the relative latency of such a centralized cache will increase, leading to an important impact on performance. In this paper, we propose partitioning the L1 data cache among clusters for clustered VLIW processors. We refer to this kind of design as fully distributed processors. In particular; we propose and evaluate three different configurations: a snoop-based cache coherence scheme, a word-interleaved cache, and flexible LO-buffers managed by the compiler. For each alternative, instruction scheduling techniques targeted to cyclic code are developed. Results for the Mediabench suite'show that the performance of such fully distributed architectures is always better than the performance of a partially distributed one with the same amount of resources. In addition, the key aspects of each fully distributed configuration are explored.Peer ReviewedPostprint (published version

Cost-effective compiler directed memory prefetching and bypassing

Ever increasing memory latencies and deeper pipelines push memory farther from the processor. Prefetching techniques aim is to bridge these two gaps by fetching data in advance to both the L1 cache and the register file. Our main contribution in this paper is a hybrid approach to the prefetching problem that combines both software and hardware prefetching in a cost-effective way by needing very little hardware support and impacting minimally the design of the processor pipeline. The prefetcher is built on-top of a static memory instruction bypassing, which is in charge of bringing prefetched values in the register file. In this paper we also present a thorough analysis of the limits of both prefetching and memory instruction bypassing. We also compare our prefetching technique with a prior speculative proposal that attacked the same problem, and we show that at much lower cost, our hybrid solution is better than a realistic implementation of speculative prefetching and bypassing. On average, our hybrid implementation achieves a 13% speed-up improvement over a version with software prefetching in a subset of numerical applications and an average of 43% over a version with no software prefetching (achieving up to a 102% for specific benchmarks).Peer ReviewedPostprint (published version

A unified modulo scheduling and register allocation technique for clustered processors

This work presents a modulo scheduling framework for clustered ILP processors that integrates the cluster assignment, instruction scheduling and register allocation steps in a single phase. This unified approach is more effective than traditional approaches based on sequentially performing some (or all) of the three steps, since it allows optimizing the global code generation problem instead of searching for optimal solutions to each individual step. Besides, it avoids the iterative nature of traditional approaches, which require repeated applications of the three steps until a valid solution is found. The proposed framework includes a mechanism to insert spill code on-the-fly and heuristics to evaluate the quality of partial schedules considering simultaneously inter-cluster communications, memory pressure and register pressure. Transformations that allow trading pressure on a type of resource for another resource are also included. We show that the proposed technique outperforms previously proposed techniques. For instance, the average speed-up for the SPECfp95 is 36% for a 4-cluster configuration.Peer ReviewedPostprint (published version

A configurable vector processor for accelerating speech coding algorithms

The growing demand for voice-over-packer (VoIP) services and multimedia-rich applications has made increasingly important the efficient, real-time implementation of low-bit rates speech coders on embedded VLSI platforms. Such speech coders are designed to substantially reduce the bandwidth requirements thus enabling dense multichannel gateways in small form factor. This however comes at a high computational cost which mandates the use of very high performance embedded processors. This thesis investigates the potential acceleration of two major ITU-T speech coding algorithms, namely G.729A and G.723.1, through their efficient implementation on a configurable extensible vector embedded CPU architecture. New scalar and vector ISAs were introduced which resulted in up to 80% reduction in the dynamic instruction count of both workloads. These instructions were subsequently encapsulated into a parametric, hybrid SISD (scalar processor)–SIMD (vector) processor. This work presents the research and implementation of the vector datapath of this vector coprocessor which is tightly-coupled to a Sparc-V8 compliant CPU, the optimization and simulation methodologies employed and the use of Electronic System Level (ESL) techniques to rapidly design SIMD datapaths

HW/SW mechanisms for instruction fusion, issue and commit in modern u-processors

In this thesis we have explored the co-designed paradigm to show alternative processor design points. Specifically, we have provided HW/SW mechanisms for instruction fusion, issue and commit for modern processors. We have implemented a co-designed virtual machine monitor that binary translates x86 instructions into RISC like micro-ops. Moreover, the translations are stored as superblocks, which are a trace of basic blocks. These superblocks are further optimized using speculative and non-speculative optimizations. Hardware mechanisms exists in-order to take corrective action in case of misspeculations. During the course of this PhD we have made following contributions. Firstly, we have provided a novel Programmable Functional unit, in-order to speed up general-purpose applications. The PFU consists of a grid of functional units, similar to CCA, and a distributed internal register file. The inputs of the macro-op are brought from the Physical Register File to the internal register file using a set of moves and a set of loads. A macro-op fusion algorithm fuses micro-ops at runtime. The fusion algorithm is based on a scheduling step that indicates whether the current fused instruction is beneficial or not. The micro-ops corresponding to the macro-ops are stored as control signals in a configuration. The macro-op consists of a configuration ID which helps in locating the configurations. A small configuration cache is present inside the Programmable Functional unit, that holds these configurations. In case of a miss in the configuration cache configurations are loaded from I-Cache. Moreover, in-order to support bulk commit of atomic superblocks that are larger than the ROB we have proposed a speculative commit mechanism. For this we have proposed a Speculative commit register map table that holds the mappings of the speculatively committed instructions. When all the instructions of the superblock have committed the speculative state is copied to Backend Register Rename Table. Secondly, we proposed a co-designed in-order processor with with two kinds of accelerators. These FU based accelerators run a pair of fused instructions. We have considered two kinds of instruction fusion. First, we fused a pair of independent loads together into vector loads and execute them on vector load units. For the second kind of instruction fusion we have fused a pair of dependent simple ALU instructions and execute them in Interlock Collapsing ALUs (ICALU). Moreover, we have evaluated performance of various code optimizations such as list-scheduling, load-store telescoping and load hoisting among others. We have compared our co-designed processor with small instruction window out-of-order processors. Thirdly, we have proposed a co-designed out-of-order processor. Specifically we have reduced complexity in two areas. First of all, we have co-designed the commit mechanism, that enable bulk commit of atomic superblocks. In this solution we got rid of the conventional ROB, instead we introduce the Superblock Ordering Buffer (SOB). SOB ensures program order is maintained at the granularity of the superblock, by bulk committing the program state. The program state consists of the register state and the memory state. The register state is held in a per superblock register map table, whereas the memory state is held in gated store buffer and updated in bulk. Furthermore, we have tackled the complexity of Out-of-Order issue logic by using FIFOs. We have proposed an enhanced steering heuristic that fixes the inefficiencies of the existing dependence-based heuristic. Moreover, a mechanism to release the FIFO entries earlier is also proposed that further improves the performance of the steering heuristic.En aquesta tesis hem explorat el paradigma de les màquines issue i commit per processadors actuals. Hem implementat una màquina virtual que tradueix binaris x86 a micro-ops de tipus RISC. Aquestes traduccions es guarden com a superblocks, que en realitat no és més que una traça de virtuals co-dissenyades. En particular, hem proposat mecanismes hw/sw per a la fusió d’instruccions, blocs bàsics. Aquests superblocks s’optimitzen utilitzant optimizacions especualtives i d’altres no speculatives. En cas de les optimizations especulatives es consideren mecanismes per a la gestió de errades en l’especulació. Al llarg d’aquesta tesis s’han fet les següents contribucions: Primer, hem proposat una nova unitat functional programmable (PFU) per tal de millorar l’execució d’aplicacions de proposit general. La PFU està formada per un conjunt d’unitats funcionals, similar al CCA, amb un banc de registres intern a la PFU distribuït a les unitats funcionals que la composen. Les entrades de la macro-operació que s’executa en la PFU es mouen del banc de registres físic convencional al intern fent servir un conjunt de moves i loads. Un algorisme de fusió combina més micro-operacions en temps d’execució. Aquest algorisme es basa en un pas de planificació que mesura el benefici de les decisions de fusió. Les micro operacions corresponents a la macro operació s’emmagatzemen com a senyals de control en una configuració. Les macro-operacions tenen associat un identificador de configuració que ajuda a localitzar d’aquestes. Una petita cache de configuracions està present dintre de la PFU per tal de guardar-les. En cas de que la configuració no estigui a la cache, les configuracions es carreguen de la cache d’instruccions. Per altre banda, per tal de donar support al commit atòmic dels superblocks que sobrepassen el tamany del ROB s’ha proposat un mecanisme de commit especulatiu. Per aquest mecanisme hem proposat una taula de mapeig especulativa dels registres, que es copia a la taula no especulativa quan totes les instruccions del superblock han comitejat. Segon, hem proposat un processador en order co-dissenyat que combina dos tipus d’acceleradors. Aquests acceleradors executen un parell d’instruccions fusionades. S’han considerat dos tipus de fusió d’instructions. Primer, combinem un parell de loads independents formant loads vectorials i els executem en una unitat vectorial. Segon, fusionem parells d’instruccions simples d’alu que són dependents i que s’executaran en una Interlock Collapsing ALU (ICALU). Per altra aquestes tecniques les hem evaluat conjuntament amb diverses optimizacions com list scheduling, load-store telescoping i hoisting de loads, entre d’altres. Aquesta proposta ha estat comparada amb un processador fora d’ordre. Tercer, hem proposat un processador fora d’ordre co-dissenyat efficient reduint-ne la complexitat en dos areas principals. En primer lloc, hem co-disenyat el mecanisme de commit per tal de permetre un eficient commit atòmic del superblocks. En aquesta solució hem substituït el ROB convencional, i en lloc hem introduït el Superblock Ordering Buffer (SOB). El SOB manté l’odre de programa a granularitat de superblock. L’estat del programa consisteix en registres i memòria. L’estat dels registres es manté en una taula per superblock, mentre que l’estat de memòria es guarda en un buffer i s’actulitza atòmicament. La segona gran area de reducció de complexitat considerarada és l’ús de FIFOs a la lògica d’issue. En aquest últim àmbit hem proposat una heurística de distribució que solventa les ineficiències de l’heurística basada en dependències anteriorment proposada. Finalment, i junt amb les FIFOs, s’ha proposat un mecanisme per alliberar les entrades de la FIFO anticipadament

MILO : a microarchitecture and logic optimizer

In this report we discuss strengths and weaknesses of logic synthesis systems and describe a system for microarchitectural and logic optimization. Our system uses a set of algorithms for synthesizing SSI/MSI macros from parameterized microarchitecture components. In addition, it uses rules for optimizing both at the microarchitecture and logic level. The system increases designer productivity and requires less design knowledge and experience from circuit engineers

A Survey of Techniques for Improving Security of GPUs

Graphics processing unit (GPU), although a powerful performance-booster, also has many security vulnerabilities. Due to these, the GPU can act as a safe-haven for stealthy malware and the weakest `link' in the security `chain'. In this paper, we present a survey of techniques for analyzing and improving GPU security. We classify the works on key attributes to highlight their similarities and differences. More than informing users and researchers about GPU security techniques, this survey aims to increase their awareness about GPU security vulnerabilities and potential countermeasures

Microprocessor energy characterization and optimization through fast, accurate, and flexible simulation

Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2001.This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.Includes bibliographical references (p. 99-102).Energy dissipation is emerging as a key constraint for both high-performance and embedded microprocessor designs, requiring computer architects to consider energy in addition to performance when evaluating design decisions. A major limitation is the general difficulty in analyzing the energy impact of architectural and microarchitectural features without constructing detailed implementations and running slow simulations. This thesis first describes the design of a fast, accurate, and flexible circuit simulation tool which enables transition-sensitive studies of microprocessor energy consumption that would otherwise be impossible or impractical. With a simulation infrastructure in place, various optimizations are implemented that target the entire datapath and cache energy consumption. The individual energy optimizations are analyzed in detail, and the microprocessor design is characterized using various energy breakdowns and studies of the bit correlation between data values. This work shows that a few relatively simple energy-saving techniques can have a large impact in the implementation of an energy-efficient microprocessor. By fully characterizing the energy usage, this thesis establishes a coherent vision of microprocessor energy consumption, and serves as a basis and motivation for further energy optimizations.by Ronny Krashinsky.S.M