Spaceborne L-Band Synthetic Aperture Radar Data for Geoscientific Analyses in Coastal Land Applications: A Review

The coastal zone offers among the world’s most productive and valuable ecosystems and is experiencing increasing pressure from anthropogenic impacts: human settlements, agriculture, aquaculture, trade, industrial activities, oil and gas exploitation and tourism. Earth observation has great capability to deliver valuable data at the local, regional and global scales and can support the assessment and monitoring of land‐ and water‐related applications in coastal zones. Compared to optical satellites, cloud‐cover does not limit the timeliness of data acquisition with spaceborne Synthetic Aperture Radar (SAR) sensors, which have all‐weather, day and night capabilities. Hence, active radar systems demonstrate great potential for continuous mapping and monitoring of coastal regions, particularly in cloud‐prone tropical and sub‐tropical climates. The canopy penetration capability with long radar wavelength enables L‐band SAR data to be used for coastal terrestrial environments and has been widely applied and investigated for the following geoscientific topics: mapping and monitoring of flooded vegetation and inundated areas; the retrieval of aboveground biomass; and the estimation of soil moisture. Human activities, global population growth, urban sprawl and climate change‐induced impacts are leading to increased pressure on coastal ecosystems causing land degradation, deforestation and land use change. This review presents a comprehensive overview of existing research articles that apply spaceborne L‐band SAR data for geoscientific analyses that are relevant for coastal land applications

Comparison of Machine Learning Methods Applied to SAR Images for Forest Classification in Mediterranean Areas

In this paper, multifrequency synthetic aperture radar (SAR) images from ALOS/PALSAR, ENVISAT/ASAR and Cosmo‐SkyMed sensors were studied for forest classification in a test area in Central Italy (San Rossore), where detailed in‐situ measurements were available. A preliminary discrimination of the main land cover classes and forest types was carried out by exploiting the synergy among L‐, C‐ and X‐bands and different polarizations. SAR data were preliminarily inspected to assess the capabilities of discriminating forest from non‐forest and separating broadleaf from coniferous forests. The temporal average backscattering coefficient (°) was computed for each sensor‐polarization pair and labeled on a pixel basis according to the reference map. Several classification methods based on the machine learning framework were applied and validated considering different features, in order to highlight the contribution of bands and polarizations, as well as to assess the classifiers’ performance. The experimental results indicate that the different surface types are best identified by using all bands, followed by joint L‐ and X‐ bands. In the former case, the best overall average accuracy (83.1%) is achieved by random forest classification. Finally, the classification maps on class edges are discussed to highlight the misclassification errors

Mapping forests in monsoon Asia with ALOS PALSAR 50-m mosaic images and MODIS imagery in 2010.

Extensive forest changes have occurred in monsoon Asia, substantially affecting climate, carbon cycle and biodiversity. Accurate forest cover maps at fine spatial resolutions are required to qualify and quantify these effects. In this study, an algorithm was developed to map forests in 2010, with the use of structure and biomass information from the Advanced Land Observation System (ALOS) Phased Array L-band Synthetic Aperture Radar (PALSAR) mosaic dataset and the phenological information from MODerate Resolution Imaging Spectroradiometer (MOD13Q1 and MOD09A1) products. Our forest map (PALSARMOD50 m F/NF) was assessed through randomly selected ground truth samples from high spatial resolution images and had an overall accuracy of 95%. Total area of forests in monsoon Asia in 2010 was estimated to be ~6.3 × 10(6 )km(2). The distribution of evergreen and deciduous forests agreed reasonably well with the median Normalized Difference Vegetation Index (NDVI) in winter. PALSARMOD50 m F/NF map showed good spatial and areal agreements with selected forest maps generated by the Japan Aerospace Exploration Agency (JAXA F/NF), European Space Agency (ESA F/NF), Boston University (MCD12Q1 F/NF), Food and Agricultural Organization (FAO FRA), and University of Maryland (Landsat forests), but relatively large differences and uncertainties in tropical forests and evergreen and deciduous forests

Utilization of bistatic TanDEM-X data to derive land cover information

Forests have significance as carbon sink in climate change. Therefore, it is of high importance to track land use changes as well as to estimate the state as carbon sink. This is useful for sustainable forest management, land use planning, carbon modelling, and support to implement international initiatives like REDD+ (Reducing Emissions from Deforestation and Degradation). A combination of field measurements and remote sensing seems most suitable to monitor forests. Radar sensors are considered as high potential due to the weather and daytime independence. TanDEM-X is a interferometric SAR (synthetic aperture radar) mission in space and can be used for land use monitoring as well as estimation of biophysical parameters. TanDEM-X is a X-band system resulting in low penetration depth into the forest canopy. Interferometric information can be useful, whereas the low penetration can be considered as an advantage. The interferometric height is assumable as canopy height, which is correlated with forest biomass. Furthermore, the interferometric coherence is mainly governed by volume decorrelation, whereas temporal decorrelation is minimized. This information can be valuable for quantitative estimations and land use monitoring. The interferometric coherence improved results in comparison to land use classifications without coherence of about 10% (75% vs. 85%). Especially the differentiation between forest classes profited from coherence. The coherence correlated with aboveground biomass in a R² of about 0.5 and resulted in a root mean square error (RSME) of 14%. The interferometric height achieved an even higher correlation with the biomass (R²=0.68) resulting in cross-validated RMSE of 7.5%. These results indicated that TanDEM-X can be considered as valuable and consistent data source for forest monitoring. Especially interferometric information seemed suitable for biomass estimation

Forest attributes mapping with SAR data in the romanian South-Eastern Carpathians requirements and outcomes

Esta tesis doctoral se centra en la estimación de variables forestales en la zona Sureste de los Cárpatos Rumanos a partir de imágenes de radar de apertura sintética. La investigación abarca parte del preprocesado de las imágenes, métodos de generación de mosaicos y la extracción de la cobertura de bosque, sus subtipos o su biomasa. La tesis se desarrolló en el Instituto Nacional de Investigación y Desarrollo Forestal Marín Dracea (INCDS) y la Universidad de Alcalá (UAH) gracias a varios proyectos: el proyecto EO-ROFORMON del INCDS (Prototyping an Earth-Observation based monitoring and forecasting system for the Romanian forests), y el proyecto EMAFOR de la UAH (Synthetic Aperture Radar (SAR) enabled Analysis Ready Data (ARD) cubes for efficient monitoring of agricultural and forested landscapes). El proyecto EO-ROFORMON fue financiado por la Autoridad Nacional para la Investigación Científica de Rumania y el Fondo Europeo de Desarrollo Regional. El proyecto EMAFOR fue financiado por la Comunidad Autónoma de Madrid (España). El objetivo de esta tesis es el desarrollo de algoritmos para la extracción de variables forestales de uso general como la cobertura, el tipo o la biomasa del bosque a partir de imagen de radar de apertura sintética. Para alcanzar dicho propósito se analizaron posibles fuentes de sesgo sistemático que podrían aparecer en zonas de montaña (ej., normalización topográfica, generación de mosaicos), y se aplicaron técnicas de aprendizaje de máquina para tareas de clasificación y regresión. La tesis contiene ocho secciones: una introducción, cinco publicaciones en revistas o actas de congresos indexados, una pendiente de publicación (quinto capítulo) y las conclusiones. La introducción contextualiza la importancia del bosque, cómo se recoge la información sobre su estado (ej., inventario forestal) y las iniciativas o marcos legislativos que requieren dicha información. A continuación, se describe cómo la teledetección puede complementar la información de inventario forestal, detallando el contexto histórico de las distintas tecnologías, su funcionamiento, y cómo pueden ser aplicadas para la extracción de información forestal. Por último, se describe la problemática y el monitoreo del bosque en Rumanía, detallando el objetivo de la tesis y su estructura. El primer capítulo analiza la influencia del modelo digital de elevaciones (MDE) en la calidad de la normalización topográfica, analizando tres MDE globales (SRTM, AW3D y TanDEM-X DEM) y uno nacional (PNOA-LiDAR). Los experimentos se basan en la comparación entre órbitas, con un MDE de referencia, y la variación del acierto en la clasificación dependiendo del MDE empleado para la normalización. Los resultados muestran una menor diferencia ente órbitas al utilizar un MDE con una mejor resolución (ej. TanDEM-X, PNOA-LIDAR), especialmente en el caso de zonas con fuertes pendientes o formas del terreno complejas, como pueden ser los valles. En zonas de alta montaña las imágenes de radar de apertura sintética (SAR) sufren frecuentes distorsiones. Estas distorsiones dependen de la geometría de adquisición, por lo que es posible combinar imágenes adquiridas desde varias órbitas para que la cobertura sea lo más completa posible. El segundo capítulo evalúa dos metodologías para la clasificación de usos del suelo utilizando datos de Sentinel-1 adquiridos desde varias órbitas. El primer método crea clasificaciones por órbita y las combina, mientras que el segundo genera un mosaico con datos de múltiples órbitas y lo clasifica. El acierto obtenido mediante combinación de clasificaciones es ligeramente mayor, mientras que la clasificación de mosaicos tiene importantes omisiones de las zonas boscosas debido a problemas en la normalización topográfica y a los efectos direccionales. El tercer capítulo se enfoca en separar la cobertura forestal de otras coberturas del suelo (urbano, vegetación baja, agua) analizando la utilidad de las variables basadas en la coherencia interferométrica. En él se realizan tres clasificaciones de máquina vector-soporte basadas en un conjunto concreto de variables. El primer conjunto contiene las estadísticas anuales de la retrodispersión (media y desviación típica anual), el segundo añade la coherencia a largo plazo (separación temporal mayor a un año), el tercero incluye las estadísticas de la coherencia a corto plazo (mínima separación temporal). Utilizar variables basadas en la coherencia aumenta el acierto de la clasificación hasta un 5% y reduce los errores de omisión de la cobertura forestal. El cuarto capítulo evalúa la posibilidad de detectar talas selectivas utilizando datos de Sentinel-1 y Sentinel-2. Sus resultados muestran que la detección resulta muy difícil debido a la saturación de los sensores y la confusión introducida por el efecto de la fenología. El quinto capítulo se centra en la clasificación de tipos de bosque basado en una serie temporal de datos Sentinel-1. Se basa en la creación de un conjunto de modelos que describen la relación entre la retrodispersión y el ángulo local de incidencia para un determinado tipo de bosque y fecha concreta. Para cada píxel se calcula el residuo respecto al modelo de cada uno de los tipos de bosque, acumulando dichos residuos a lo largo de la serie temporal. Hecho esto, cada píxel es asignado al tipo de bosque que acumula un menor residuo. Los resultados son prometedores, mostrando que frondosas y coníferas tienen un comportamiento distintivo, y que es posible separar ambos tipos de bosque con un alto grado de acierto. El sexto capítulo está dedicado a la estimación de biomasa utilizando datos Sentinel-1, ALOS PALSAR y regresión Random Forest. Se obtiene un error similar para ambos sensores a pesar de utilizar una banda diferente (band-C vs. -L), con poca reducción en el error cuando ambas bandas se utilizan conjuntamente. Sin embargo, el ajuste de un estimador adaptado a las condiciones locales de Rumanía sí ofreció una reducción de del error al ser comparado con las estimaciones globales de biomasa

Timber production assessment of a plantation forest: An integrated framework with field-based inventory, multi-source remote sensing data and forest management history

Timber production is the purpose for managing plantation forests, and its spatial and quantitative information is critical for advising management strategies. Previous studies have focused on growing stock volume (GSV), which represents the current potential of timber production, yet few studies have investigated historical process-harvested timber. This resulted in a gap in a synthetical ecosystem service assessment of timber production. In this paper, we established a Management Process-based Timber production (MPT) framework to integrate the current GSV and the harvested timber derived from historical logging regimes, trying to synthetically assess timber production for a historical period. In the MPT framework, age-class and current GSV determine the times of historical thinning and the corresponding harvested timber, by using a "space-for-time" substitution. The total timber production can be estimated by the historical harvested timber in each thinning and the current GSV. To test this MPT framework, an empirical study on a larch plantation (LP) with area of 43,946 ha was conducted in North China for a period from 1962 to 2010. Field-based inventory data was integrated with ALOS PALSAR (Advanced Land-Observing Satellite Phased Array L-band Synthetic Aperture Radar) and Landsat-8 OLI (Operational Land Imager) data for estimating the age-class and current GSV of LP. The random forest model with PALSAR backscatter intensity channels and OLI bands as input predictive variables yielded an accuracy of 67.9% with a Kappa coefficient of 0.59 for age-class classification. The regression model using PALSAR data produced a root mean square error (RMSE) of 36.5 m(3) ha(-1). The total timber production of LP was estimated to be 7.27 x 10(6) m(3), with 4.87 x 10(6) m(3) in current GSV and 2.40 x 10(6) m(3) in harvested timber through historical thinning. The historical process-harvested timber accounts to 33.0% of the total timber production, which component has been neglected in the assessments for current status of plantation forests. Synthetically considering the RMSE for predictive GSV and misclassification of age-class, the error in timber production were supposed to range from -55.2 to 56.3 m(3) ha(-1). The MPT framework can be used to assess timber production of other tree species at a larger spatial scale, providing crucial information for a better understanding of forest ecosystem service. (C) 2016 Elsevier B.V. All rights reserved.ArticleINTERNATIONAL JOURNAL OF APPLIED EARTH OBSERVATION AND GEOINFORMATION.52:155-165(2016)journal articl

Characterisation and monitoring of forest disturbances in Ireland using active microwave satellite platforms

Forests are one of the major carbon sinks that significantly contribute towards achieving targets of the Kyoto Protocol, and its successors, in reducing greenhouse (GHG) emissions. In order to contribute to regular National Inventory Reporting, and as part of the on-going development of the Irish national GHG reporting system (CARBWARE), improvements in characterisation of changes in forest carbon stocks have been recommended to provide a comprehensive information flow into CARBWARE. The Irish National Forest Inventory (NFI) is updated once every six years, thus there is a need for an enhanced forest monitoring system to obtain annual forest updates to support government agencies and forest management companies in their strategic decision making and to comply with international GHG reporting standards. Sustainable forest management is imperative to promote net carbon absorption from forests. Based on the NFI data, Irish forests have removed or sequestered an average of 3.8 Mt of atmospheric CO2 per year between 2007 and 2016. However, unmanaged and degraded forests become a net emitter of carbon. Disturbances from human induced activities such as clear felling, thinning and deforestation results in carbon emissions back into the atmosphere. Funded by the Department of Agriculture, Food and the Marine (DAFM, Ireland), this PhD study focuses on exploring the potential of data from L-band Synthetic Aperture Radar (SAR) satellite based sensors for monitoring changes in the small stand forests of Ireland. Historic data from ALOS PALSAR in the late 2000s and more recent data from ALOS-2 PALSAR-2 sensors have been used to map forest areas and characterise the different disturbances observed within three different regions of Ireland. Forest mapping and disturbance characterisation was achieved by combining the machine learning supervised Random Forests (RF) and unsupervised Iterative Self-Organizing Data Analysis (ISODATA) classification techniques. The lack of availability of ground truth data supported use of this unsupervised approach which forms natural clusters based on their multi-temporal signatures, with divergence statistics used to select the optimal number of clusters to represent different forest classes. This approach to forest monitoring using SAR imagery has not been reported in the peer-review literature and is particularly beneficial where there is a dearth of ground-based information. When applied to the forests, mapped with an accuracy of up to 97% by RF, the ISODATA technique successfully identified the unique multi-temporal pattern associated with clear-fells which exhibited a decrease of 4 to 5 decibels (dB) between the images acquired before and after the event. The clustering algorithm effectively highlighted the occurrence of other disturbance events within forests with a decrease of 2±0.5dB between two consecutive years, as well as areas of tree growth and afforestation. A highlight of the work is the successful transferability of the algorithm, developed using ALOS PALSAR, to ALOS-2 PALSAR-2 data thereby demonstrating the potential continuity of annual forest monitoring. The higher spatial and radiometric resolutions of ALOS-2 PALSAR-2 data have shown improvements in forest mapping compared to ALOS PALSAR data. From mapping a minimum forest size of 1.8 ha with ALOS PALSAR, a minimum area of 1.1 ha was achieved with the ALOS-2 PALSAR-2 images. Moreover, even with some different backscatter characteristics of images acquired in different seasons, similar signature patterns between the sensors were retrieved that helped to define the cluster groups, thus demonstrating the robustness of the algorithm and its successful transferability. Having proven the potential to monitor forest disturbances, the results from both the sensors were used to detect deforestation over the time period 2007-2016. Permanent land-use changes pertaining to conversion of forests to agricultural lands and windfarms were identified which are important with respect to forest monitoring and carbon reporting in Ireland. Overall, this work has presented a viable approach to support forest monitoring operations in Ireland. By providing disturbance information from SAR, it can supplement projects working with optical images which are generally limited by cloud cover, particularly in parts of northern, western and upland Ireland. This approach adds value to ground based forest monitoring by mapping distinct forests over large areas on an annual basis. This study has demonstrated the ability to apply the algorithm to three different study areas, with a vision to operationalise the algorithm on a national scale. The main limitations experienced in this study were the lack of L-band SAR data availability and reference datasets. With typically only one image acquired per year, and discrepancies and omissions existing within reference datasets, understanding the behaviour of certain cluster groups representing disturbances was challenging. However, this approach has addressed some issues within the reference datasets, for example locating areas for which a felling licence was granted but where trees were never cut, by providing detailed systematic mapping of forests. Future satellites such as Tandem-L, SAOCOM-2A and 2B, P-band BIOMASS mission and ALOS-4 PALSAR-3 may overcome the issue of limited SAR image acquisitions provided more images per year are available, especially during the summer months

The SAR Handbook: Comprehensive Methodologies for Forest Monitoring and Biomass Estimation

This Synthetic Aperture Radar (SAR) handbook of applied methods for forest monitoring and biomass estimation has been developed by SERVIR in collaboration with SilvaCarbon to address pressing needs in the development of operational forest monitoring services. Despite the existence of SAR technology with all-weather capability for over 30 years, the applied use of this technology for operational purposes has proven difficult. This handbook seeks to provide understandable, easy-to-assimilate technical material to remote sensing specialists that may not have expertise on SAR but are interested in leveraging SAR technology in the forestry sector