Enabling 5G Technologies

The increasing demand for connectivity and broadband wireless access is leading to the fifth generation (5G) of cellular networks. The overall scope of 5G is greater in client width and diversity than in previous generations, requiring substantial changes to network topologies and air interfaces. This divergence from existing network designs is prompting a massive growth in research, with the U.S. government alone investing $400 million in advanced wireless technologies. 5G is projected to enable the connectivity of 20 billion devices by 2020, and dominate such areas as vehicular networking and the Internet of Things. However, many challenges exist to enable large scale deployment and general adoption of the cellular industries. In this dissertation, we propose three new additions to the literature to further the progression 5G development. These additions approach 5G from top down and bottom up perspectives considering interference modeling and physical layer prototyping. Heterogeneous deployments are considered from a purely analytical perspective, modeling co-channel interference between and among both macrocell and femtocell tiers. We further enhance these models with parameterized directional antennas and integrate them into a novel mixed point process study of the network. At the air interface, we examine Software-Defined Radio (SDR) development of physical link level simulations. First, we introduce a new algorithm acceleration framework for MATLAB, enabling real-time and concurrent applications. Extensible beyond SDR alone, this dataflow framework can provide application speedup for stream-based or data dependent processing. Furthermore, using SDRs we develop a localization testbed for dense deployments of 5G smallcells. Providing real-time tracking of targets using foundational direction of arrival estimation techniques, including a new OFDM based correlation implementation

Advanced Wireless Localisation Methods Dealing with Incomplete Measurements

Positioning techniques have become an essential part of modern engineering, and the improvement in computing devices brings great potential for more advanced and complicated algorithms. This thesis first studies the existing radio signal based positioning techniques and then presents three developed methods in the sense of dealing with incomplete data. Firstly, on the basis of received signal strength (RSS) location fingerprinting techniques, the Kriging interpolation methods are applied to generate complete fingerprint databases of denser reference locations from sparse or incomplete data sets, as a solution of reducing the workload and cost of offline data collection. Secondly, with incomplete knowledge of shadowing correlation, a new approach of Bayesian inference on RSS based multiple target localisation is proposed taking advantage of the inverse Wishart conjugate prior. The MCMC method (Metropolis-within-Gibbs) and the maximum a posterior (MAP) / maximum likelihood (ML) method are then considered to produce target location estimates. Thirdly, a new information fusion approach is developed for the time difference of arrival (TDOF) and frequency difference of arrival (FDOA) based dual-satellite geolocation system, as a solution to the unknown time and frequency offsets. All proposed methods are studied and validated through simulations. Result analyses and future work directions are discussed

1-D broadside-radiating leaky-wave antenna based on a numerically synthesized impedance surface

A newly-developed deterministic numerical technique for the automated design of metasurface antennas is applied here for the first time to the design of a 1-D printed Leaky-Wave Antenna (LWA) for broadside radiation. The surface impedance synthesis process does not require any a priori knowledge on the impedance pattern, and starts from a mask constraint on the desired far-field and practical bounds on the unit cell impedance values. The designed reactance surface for broadside radiation exhibits a non conventional patterning; this highlights the merit of using an automated design process for a design well known to be challenging for analytical methods. The antenna is physically implemented with an array of metal strips with varying gap widths and simulation results show very good agreement with the predicted performance

Beam scanning by liquid-crystal biasing in a modified SIW structure

A fixed-frequency beam-scanning 1D antenna based on Liquid Crystals (LCs) is designed for application in 2D scanning with lateral alignment. The 2D array environment imposes full decoupling of adjacent 1D antennas, which often conflicts with the LC requirement of DC biasing: the proposed design accommodates both. The LC medium is placed inside a Substrate Integrated Waveguide (SIW) modified to work as a Groove Gap Waveguide, with radiating slots etched on the upper broad wall, that radiates as a Leaky-Wave Antenna (LWA). This allows effective application of the DC bias voltage needed for tuning the LCs. At the same time, the RF field remains laterally confined, enabling the possibility to lay several antennas in parallel and achieve 2D beam scanning. The design is validated by simulation employing the actual properties of a commercial LC medium

Abstracts on Radio Direction Finding (1899 - 1995)

The files on this record represent the various databases that originally composed the CD-ROM issue of "Abstracts on Radio Direction Finding" database, which is now part of the Dudley Knox Library's Abstracts and Selected Full Text Documents on Radio Direction Finding (1899 - 1995) Collection. (See Calhoun record https://calhoun.nps.edu/handle/10945/57364 for further information on this collection and the bibliography). Due to issues of technological obsolescence preventing current and future audiences from accessing the bibliography, DKL exported and converted into the three files on this record the various databases contained in the CD-ROM. The contents of these files are: 1) RDFA_CompleteBibliography_xls.zip [RDFA_CompleteBibliography.xls: Metadata for the complete bibliography, in Excel 97-2003 Workbook format; RDFA_Glossary.xls: Glossary of terms, in Excel 97-2003 Workbookformat; RDFA_Biographies.xls: Biographies of leading figures, in Excel 97-2003 Workbook format]; 2) RDFA_CompleteBibliography_csv.zip [RDFA_CompleteBibliography.TXT: Metadata for the complete bibliography, in CSV format; RDFA_Glossary.TXT: Glossary of terms, in CSV format; RDFA_Biographies.TXT: Biographies of leading figures, in CSV format]; 3) RDFA_CompleteBibliography.pdf: A human readable display of the bibliographic data, as a means of double-checking any possible deviations due to conversion

Positioning algorithms for RFID-based multi-sensor indoor/outdoor positioning techniques

Position information has been very important. People need this information almost everywhere all the time. However, it is a challenging task to provide precise positions indoor/outdoor seamlessly. Outdoor positioning has been widely studied and accurate positions can usually be achieved by well developed GPS techniques. However, these techniques are difficult to be used indoor since GPS signals are too weak to be received. The alternative techniques, such as inertial sensors and radio-based pseudolites, can be used for indoor positioning but have limitations. For example, the inertial sensors suffer from drifting problems caused by the accumulating errors of measured acceleration and velocity and the radio-based techniques are prone to the obstructions and multipath effects of the transmitted signals. It is therefore necessary to develop improved methods for minimising the limitations of the current indoor positioning techniques and providing an adequately precise solution of the indoor positioning and seamless indoor/outdoor positioning. The main objectives of this research are to investigate and develop algorithms for the low-cost and portable indoor personal positioning system using Radio Frequency Identification (RFID) based multi-sensor techniques, such as integrating with Micro-Electro-Mechanical Systems (MEMS) Inertial Navigation System (INS) and/or GPS. A RFID probabilistic Cell of Origin (CoO) algorithm is developed, which is superior to the conventional CoO positioning algorithm in its positioning accuracy and continuity. Integration algorithms are also developed for RFID-based multi-sensor positioning techniques, which can provide metre-level positioning accuracy for dynamic personal positioning indoors. In addition, indoor/outdoor seamless positioning algorithms are investigated based on the iterated Reduced Sigma Point Kalman Filter (RSPKF) for RFID/MEMS INS/low-cost GPS integrated technique, which can provide metre-level positioning accuracy for personal positioning. 3-D GIS assisted personal positioning algorithms are also developed, including the map matching algorithm based on the probabilistic maps for personal positioning and the Site Specific (SISP) propagation model for efficiently generating the RFID signal strength distributions in location fingerprinting algorithms. Both static and dynamic indoor positioning experiments have been conducted using the RFID and RFID/MEMS INS integrated techniques. Metre-level positioning accuracy is achieved (e.g. 3.5m in rooms and 1.5m in stairways for static position, 4m for dynamic positioning and 1.7m using the GIS assisted positioning algorithms). Various indoor/outdoor experiments have been conducted using the RFID/MEMS INS/low-cost GPS integrated technique. It indicates that the techniques selected in this study, integrated with the low-cost GPS, can be used to provide continuous indoor/outdoor positions in approximately 4m accuracy with the iterated RSPKF. The results from the above experiments have demonstrated the improvements of integrating multiple sensors with RFID and utilizing the 3-D GIS data for personal positioning. The algorithms developed can be used in a portable RFID based multi-sensor positioning system to achieve metre-level accuracy in the indoor/outdoor environments. The proposed system has potential applications, such as tracking miners underground, monitoring athletes, locating first responders, guiding the disabled and providing other general location based services (LBS)

Applications of compressive sensing to direction of arrival estimation

Die Schätzung der Einfallsrichtungen (Directions of Arrival/DOA) mehrerer ebener Wellenfronten mit Hilfe eines Antennen-Arrays ist eine der prominentesten Fragestellungen im Gebiet der Array-Signalverarbeitung. Das nach wie vor starke Forschungsinteresse in dieser Richtung konzentriert sich vor allem auf die Reduktion des Hardware-Aufwands, im Sinne der Komplexität und des Energieverbrauchs der Empfänger, bei einem vorgegebenen Grad an Genauigkeit und Robustheit gegen Mehrwegeausbreitung. Diese Dissertation beschäftigt sich mit der Anwendung von Compressive Sensing (CS) auf das Gebiet der DOA-Schätzung mit dem Ziel, hiermit die Komplexität der Empfängerhardware zu reduzieren und gleichzeitig eine hohe Richtungsauflösung und Robustheit zu erreichen. CS wurde bereits auf das DOA-Problem angewandt unter der Ausnutzung der Tatsache, dass eine Superposition ebener Wellenfronten mit einer winkelabhängigen Leistungsdichte korrespondiert, die über den Winkel betrachtet sparse ist. Basierend auf der Idee wurden CS-basierte Algorithmen zur DOA-Schätzung vorgeschlagen, die sich durch eine geringe Rechenkomplexität, Robustheit gegenüber Quellenkorrelation und Flexibilität bezüglich der Wahl der Array-Geometrie auszeichnen. Die Anwendung von CS führt darüber hinaus zu einer erheblichen Reduktion der Hardware-Komplexität, da weniger Empfangskanäle benötigt werden und eine geringere Datenmenge zu verarbeiten und zu speichern ist, ohne dabei wesentliche Informationen zu verlieren. Im ersten Teil der Arbeit wird das Problem des Modellfehlers bei der CS-basierten DOA-Schätzung mit gitterbehafteten Verfahren untersucht. Ein häufig verwendeter Ansatz um das CS-Framework auf das DOA-Problem anzuwenden ist es, den kontinuierlichen Winkel-Parameter zu diskreditieren und damit ein Dictionary endlicher Größe zu bilden. Da die tatsächlichen Winkel fast sicher nicht auf diesem Gitter liegen werden, entsteht dabei ein unvermeidlicher Modellfehler, der sich auf die Schätzalgorithmen auswirkt. In der Arbeit wird ein analytischer Ansatz gewählt, um den Effekt der Gitterfehler auf die rekonstruierten Spektra zu untersuchen. Es wird gezeigt, dass sich die Messung einer Quelle aus beliebiger Richtung sehr gut durch die erwarteten Antworten ihrer beiden Nachbarn auf dem Gitter annähern lässt. Darauf basierend wird ein einfaches und effizientes Verfahren vorgeschlagen, den Gitterversatz zu schätzen. Dieser Ansatz ist anwendbar auf einzelne Quellen oder mehrere, räumlich gut separierte Quellen. Für den Fall mehrerer dicht benachbarter Quellen wird ein numerischer Ansatz zur gemeinsamen Schätzung des Gitterversatzes diskutiert. Im zweiten Teil der Arbeit untersuchen wir das Design kompressiver Antennenarrays für die DOA-Schätzung. Die Kompression im Sinne von Linearkombinationen der Antennensignale, erlaubt es, Arrays mit großer Apertur zu entwerfen, die nur wenige Empfangskanäle benötigen und sich konfigurieren lassen. In der Arbeit wird eine einfache Empfangsarchitektur vorgeschlagen und ein allgemeines Systemmodell diskutiert, welches verschiedene Optionen der tatsächlichen Hardware-Realisierung dieser Linearkombinationen zulässt. Im Anschluss wird das Design der Gewichte des analogen Kombinations-Netzwerks untersucht. Numerische Simulationen zeigen die Überlegenheit der vorgeschlagenen kompressiven Antennen-Arrays im Vergleich mit dünn besetzten Arrays der gleichen Komplexität sowie kompressiver Arrays mit zufällig gewählten Gewichten. Schließlich werden zwei weitere Anwendungen der vorgeschlagenen Ansätze diskutiert: CS-basierte Verzögerungsschätzung und kompressives Channel Sounding. Es wird demonstriert, dass die in beiden Gebieten durch die Anwendung der vorgeschlagenen Ansätze erhebliche Verbesserungen erzielt werden können.Direction of Arrival (DOA) estimation of plane waves impinging on an array of sensors is one of the most important tasks in array signal processing, which have attracted tremendous research interest over the past several decades. The estimated DOAs are used in various applications like localization of transmitting sources, massive MIMO and 5G Networks, tracking and surveillance in radar, and many others. The major objective in DOA estimation is to develop approaches that allow to reduce the hardware complexity in terms of receiver costs and power consumption, while providing a desired level of estimation accuracy and robustness in the presence of multiple sources and/or multiple paths. Compressive sensing (CS) is a novel sampling methodology merging signal acquisition and compression. It allows for sampling a signal with a rate below the conventional Nyquist bound. In essence, it has been shown that signals can be acquired at sub-Nyquist sampling rates without loss of information provided they possess a sufficiently sparse representation in some domain and that the measurement strategy is suitably chosen. CS has been recently applied to DOA estimation, leveraging the fact that a superposition of planar wavefronts corresponds to a sparse angular power spectrum. This dissertation investigates the application of compressive sensing to the DOA estimation problem with the goal to reduce the hardware complexity and/or achieve a high resolution and a high level of robustness. Many CS-based DOA estimation algorithms have been proposed in recent years showing tremendous advantages with respect to the complexity of the numerical solution while being insensitive to source correlation and allowing arbitrary array geometries. Moreover, CS has also been suggested to be applied in the spatial domain with the main goal to reduce the complexity of the measurement process by using fewer RF chains and storing less measured data without the loss of any significant information. In the first part of the work we investigate the model mismatch problem for CS based DOA estimation algorithms off the grid. To apply the CS framework a very common approach is to construct a finite dictionary by sampling the angular domain with a predefined sampling grid. Therefore, the target locations are almost surely not located exactly on a subset of these grid points. This leads to a model mismatch which deteriorates the performance of the estimators. We take an analytical approach to investigate the effect of such grid offsets on the recovered spectra showing that each off-grid source can be well approximated by the two neighboring points on the grid. We propose a simple and efficient scheme to estimate the grid offset for a single source or multiple well-separated sources. We also discuss a numerical procedure for the joint estimation of the grid offsets of closer sources. In the second part of the thesis we study the design of compressive antenna arrays for DOA estimation that aim to provide a larger aperture with a reduced hardware complexity and allowing reconfigurability, by a linear combination of the antenna outputs to a lower number of receiver channels. We present a basic receiver architecture of such a compressive array and introduce a generic system model that includes different options for the hardware implementation. We then discuss the design of the analog combining network that performs the receiver channel reduction. Our numerical simulations demonstrate the superiority of the proposed optimized compressive arrays compared to the sparse arrays of the same complexity and to compressive arrays with randomly chosen combining kernels. Finally, we consider two other applications of the sparse recovery and compressive arrays. The first application is CS based time delay estimation and the other one is compressive channel sounding. We show that the proposed approaches for sparse recovery off the grid and compressive arrays show significant improvements in the considered applications compared to conventional methods

Recent Advances in Indoor Localization Systems and Technologies

Despite the enormous technical progress seen in the past few years, the maturity of indoor localization technologies has not yet reached the level of GNSS solutions. The 23 selected papers in this book present the recent advances and new developments in indoor localization systems and technologies, propose novel or improved methods with increased performance, provide insight into various aspects of quality control, and also introduce some unorthodox positioning methods