Urban Deformation Monitoring using Persistent Scatterer Interferometry and SAR tomography

This book focuses on remote sensing for urban deformation monitoring. In particular, it highlights how deformation monitoring in urban areas can be carried out using Persistent Scatterer Interferometry (PSI) and Synthetic Aperture Radar (SAR) Tomography (TomoSAR). Several contributions show the capabilities of Interferometric SAR (InSAR) and PSI techniques for urban deformation monitoring. Some of them show the advantages of TomoSAR in un-mixing multiple scatterers for urban mapping and monitoring. This book is dedicated to the technical and scientific community interested in urban applications. It is useful for choosing the appropriate technique and gaining an assessment of the expected performance. The book will also be useful to researchers, as it provides information on the state-of-the-art and new trends in this fiel

Differential Radar Interferometry Applied to the Detection and Monitoring of Geological Hazards

We live in a constantly changing environment, characterized by climate changes, extreme weather events and the occurrence of more frequent geological hazards that have a strong negative impact on the territory and society, interrupting services, damaging buildings and infrastructure and jeopardizing the life of millions of people worldwide. For this reason, there is the need to build a society resilient to natural-hazards, which can understand how the natural system behaves and responds to natural and human-induced modifications and can adapt to these changes. The monitoring of the territory is necessary to comprehend the triggering factors and the mechanisms of geological hazards and to plan the most suitable actions to prevent and mitigate the risk. The monitoring of geological hazards with conventional ground-based techniques such as Global Positioning System (GPS) and levelling is usually expensive and time consuming, which limits the number of measured points and the overall duration of the surveys. One of the best way to overcome to these problems is to use remote-sensing techniques to monitor large portion of territory reducing operating costs and time. Advanced Differential Synthetic Aperture Radar Interferometry (A-DInSAR) is one of the best tool to monitor and study ground displacements over very large portions of territory in a cost-effective way. In this Doctoral Thesis, we applied A-DInSAR to the monitoring of the geological instabilities occurring in different areas characterized by unique geological and environmental features. The selected areas include different environments such as vegetate territories, low and steep topography, coastal areas, salty deserts, urbanized land, each of them affected by hazards of natural and anthropic origin such as landslides, subsidence and karstic activity. In each case study, the monitoring activity presented its own challenges that were overcome adopting specific technical solutions in the data processing and management. The aim of this work is to give an overview of the potential of A-DInSAR techniques when applied to the study of geological hazards in different environments. This can be useful to show to local Authorities that A-DInSAR can be fully integrated as part of the activities carried out to manage the territory and to prevent and mitigate the risk related to geological hazards

Rising groundwater levels in the Neapolitan area and its impacts on civil engineering structures, agricultural soils and archaeological sites

The rise of groundwater levels (GWLr) is a worldwide phenomenon with several consequences for urban and rural environment, cultural heritage and human health. In this thesis the phenomenon and its effects are analysed in two sectors of the Metropolitan City of Naples (southern Italy). These areas are the central sector of the eastern plain of Naples and the Cumae archaeological site in the western coastal sector of Phlegraean Fields. The triggering mechanism of GWLr is attributed to anthropogenic and natural causes, as the groundwater rebound (GR) process and the relative sea level rise due to volcano-tectonic subsidence of coastal areas. In the eastern plain of Naples, the interruption of pumping for public and private purposes occurred in 1990, leading to a progressive increase of piezometric levels with values up to 16.54 m. Since the end of 2000s, episodes of groundwater flooding (GF) have been registered on underground structures and agricultural soils. The historical piezometric levels and a comprehensive conceptual model of the aquifer have been reconstructed, as well as a first inventory of GF episodes and the hydrogeological controlling factors of GF occurrence have been detected. The economic consequences of GF have been analysed for an experimental building of study area, in which a sharp increment of expenditures has been registered. These costs include technical and legal support, construction and maintenance of GF mitigation measures and electricity consumption. Others GWLr-induced phenomena have been recognised, as ground vertical deformation and variations of the groundwater contamination. A relationship between GWLr and ground uplift emerges from the coupled analysis of piezometric and interferometric data, referred to the 1989-2013 period. The ground deformation occurs in response to the recovery of pore-pressure in the aquifer system, reaching an uplift magnitude up to 40-50 mm. In the 1989-2017 period, the piezometric levels and the concentrations of some natural contaminants in groundwater (Fe, Mn, fluorides) show opposite trends, conversely the same rising trend has been observed with nitrates. These different responses to piezometric rise are related to the lack of mobilization of deep fluids due to the interruption of pumping and to the reduction of the surficial contaminants' time travel caused by a shorter thickness of the vadose zone. In the western sector of Phlegraean Fields, the naturally triggered GWLr has caused GF in the Cumae archaeological site for the last decade, threatening safeguard and conservation of the archaeological heritage. From an integrated hydrogeological, hydrochemical and isotopic survey, a considerable contamination of groundwater resulted, due to the presence of rising highly mineralized fluids, mobilized during pumping periods, and others anthropogenic sources of contamination. Lastly, a novel methodology for groundwater flooding susceptibility (GFS) assessment has been developed by using machine learning techniques and tested in the eastern plain of Naples. Points of GF occurrence have been connected to environmental predisposing factors through Spatial Distribution Models' algorithms to estimate the most prone areas' distribution. Ensemble Models have been carried out to reduce the uncertainty associated with each algorithm and increase its reliability. Mapping of GFS has been realized by dividing occurrence probability values into five classes of susceptibility. Results show an optimal correspondence between GF points' location and the highest classes (93% of GF points falls into high and very high classes). The results of this research provide new knowledge on the GWLr phenomenon that has impacted a large territory of the Metropolitan City of Naples. The methodological approach used can be exported in others hydrogeological contexts to characterize GWLr and its impacts. In addition, the implemented GFS methodology represents a new tool to assist local government authorities, planners and water decision-makers in addressing the problems deriving from GF, and a first step for the evaluation of GF risk as required by Italian and European legislation

Study of groundwater properties and behaviour using geospatial techniques

Groundwater contributes a significant proportion of the earth’s freshwater and is essential to sustain life on earth, but its availability in spatial and temporal dimensions is not uniform. With the advent of efficient pumps and rural electrification, global groundwater extraction increased from 312 km3/year in the 1960s to 800 km3/year in 2000s; approximately 70% of this extraction is used for agriculture. About half of domestic human water consumption in urban areas is from groundwater. The ever-increasing dependence on groundwater has led to its depletion across various parts of the world. This trend must be reversed to sustain the critical role of groundwater. Groundwater monitoring based on validated data can provide information that can guide decision making to decrease groundwater stress on local and global scales. This thesis aims to monitor spatio-temporal changes in groundwater and related phenomena (like land subsidence) using geospatial techniques like InSAR, GRACE, GIS, data analysis and data visualisation. The over-extraction or rebound of groundwater can lead to land deformation because of the change in effective stress of underground sediments. Groundwater-induced land movement can cause damage to property and resources, and hence it must be monitored for the safety and economics of a city. This thesis explores the suitability of Persistent Scatterer Interferometric Synthetic Aperture Radar (PSInSAR) to measure land deformation and different senor-software for InSAR processing. The groundwater quantity variation and resulting land deformation for London using InSAR and Gravity Recovery and Climate Experiment (GRACE) between 2002-2010 were analysed. Long-term, decreasing, complex, non-linear patterns in the spatial and temporal domains from both InSAR and GRACE datasets were observed. The land movement velocities varied from -6 to +6 mm/year, and their reliability was validated with observed GNSS data by conducting a two-sample t-test. The average groundwater loss estimated from GRACE was found to be 9.003 MCM/year. The results demonstrate that InSAR and GRACE complement each other and can be an excellent source of monitoring groundwater for hydrologists. Then groundwater induced subsidence for London and the National Capital Territory of Delhi (NCT-Delhi) between 2016 and 2020 were studied. The land movement velocities were found to vary between -24 mm/year to +24 mm/year for London and between -18 mm/year to +30 mm/year for NCT-Delhi. This land movement was compared with observed groundwater levels and spatio-temporal variation of groundwater. A 1-D mathematical model was used to quantify land deformation for a given change in groundwater level. It was broadly observed that when large volumes of groundwater are extracted, it leads to land subsidence, and when groundwater is recharged, surface uplift is witnessed. However the local geology, did play an important role in the extent of subsidence, which was considered in the mathematical model. The increased pressure on groundwater can cause spatio-temporal changes in its quality because of various atmospheric stimulations, varied geology, variation in subsurface mineralogy and factors controlling residence times. Moreover, the variation of groundwater quality is vital for the sustainable management and safety of groundwater. Thus, the variation in groundwater quality is analysed from observed data for London between 2000 and 2020. The data samples were used from 500 wells in the London basin, and the data is provided in the free open access domain by Environment Agency. The overall groundwater in London was found to be dominant magnesium bicarbonate type which typically represents shallow fresh groundwater, and spatio-temporal variations of hardness, sodium, and dissolved oxygen (DO) were also studied. Significant variations in the range of each constituent were found, which was attributed to variation in the geology of the London Palaeogene aquifers and anthropogenic activities. All the case studies help better understand the phenomenon of spatio-temporal variation in groundwater behaviour and associated land deformation for urban cities. The research presented in this thesis can be used to determine whether groundwater is available and suitable for its intended purpose, discover pollutants, examine any spatio-temporal variations, and monitor land subsidence

Impact of geogenic degassing on C-isotopic composition of dissolved carbon in karst systems of Greece

The Earth C-cycle is complex, where endogenic and exogenic sources are interconnected, operating in a multiple spatial and temporal scale (Lee et al., 2019). Non-volcanic CO2 degassing from active tectonic structures is one of the less defined components of this cycle (Frondini et al., 2019). Carbon mass-balance (Chiodini et al., 2000) is a useful tool to quantify the geogenic carbon output from regional karst hydrosystems. This approach has been demonstrated for central Italy and may be valid also for Greece, due to the similar geodynamic settings. Deep degassing in Greece has been ascertained mainly at hydrothermal and volcanic areas, but the impact of geogenic CO2 released by active tectonic areas has not yet been quantified. The main aim of this research is to investigate the possible deep degassing through the big karst aquifers of Greece. Since 2016, 156 karst springs were sampled along most of the Greek territory. To discriminate the sources of carbon, the analysis of the isotopic composition of carbon was carried out. δ13CTDIC values vary from -16.61 to -0.91‰ and can be subdivided into two groups characterized by (a) low δ13CTDIC, and (b) intermediate to high δ13CTDIC with a threshold value of -6.55‰. The composition of the first group can be related to the mixing of organic-derived CO2 and the dissolution of marine carbonates. Springs of the second group, mostly located close to Quaternary volcanic areas, are linked to possible carbon input from deep sources

Impact of Etna’s volcanic emission on major ions and trace elements composition of the atmospheric deposition

Mt. Etna, on the eastern coast of Sicily (Italy), is one of the most active volcanoes on the planet and it is widely recognized as a big source of volcanic gases (e.g., CO2 and SO2), halogens, and a lot of trace elements, to the atmosphere in the Mediterranean region. Especially during eruptive periods, Etna’s emissions can be dispersed over long distances and cover wide areas. A group of trace elements has been recently brought to attention for their possible environmental and human health impacts, the Technology-critical elements. The current knowledge about their geochemical cycles is still scarce, nevertheless, recent studies (Brugnone et al., 2020) evidenced a contribution from the volcanic activity for some of them (Te, Tl, and REE). In 2021, in the framework of the research project “Pianeta Dinamico”, by INGV, a network of 10 bulk collectors was implemented to collect, monthly, atmospheric deposition samples. Four of these collectors are located on the flanks of Mt. Etna, other two are in the urban area of Catania and three are in the industrial area of Priolo, all most of the time downwind of the main craters. The last one, close to Cesarò (Nebrodi Regional Park), represents the regional background. The research aims to produce a database on major ions and trace element compositions of the bulk deposition and here we report the values of the main physical-chemical parameters and the deposition fluxes of major ions and trace elements from the first year of research. The pH ranged from 3.1 to 7.7, with a mean value of 5.6, in samples from the Etna area, while it ranged between 5.2 and 7.6, with a mean value of 6.4, in samples from the other study areas. The EC showed values ranging from 5 to 1032 μS cm-1, with a mean value of 65 μS cm-1. The most abundant ions were Cl- and SO42- for anions, Na+ and Ca+ for cations, whose mean deposition fluxes, considering all sampling sites, were 16.6, 6.8, 8.4, and 6.0 mg m-2 d, respectively. The highest deposition fluxes of volcanic refractory elements, such as Al, Fe, and Ti, were measured in the Etna’s sites, with mean values of 948, 464, and 34.3 μg m-2 d-1, respectively, higher than those detected in the other sampling sites, further away from the volcanic source (26.2, 12.4, 0.5 μg m-2 d-1, respectively). The same trend was also observed for volatile elements of prevailing volcanic origin, such as Tl (0.49 μg m-2 d-1), Te (0.07 μg m-2 d-1), As (0.95 μg m-2 d-1), Se (1.92 μg m-2 d-1), and Cd (0.39 μg m-2 d-1). Our preliminary results show that, close to a volcanic area, volcanic emissions must be considered among the major contributors of ions and trace elements to the atmosphere. Their deposition may significantly impact the pedosphere, hydrosphere, and biosphere and directly or indirectly human health

EVOLUTION OF THE SUBCONTINENTAL LITHOSPHERE DURING MESOZOIC TETHYAN RIFTING: CONSTRAINTS FROM THE EXTERNAL LIGURIAN MANTLE SECTION (NORTHERN APENNINE, ITALY)

Our study is focussed on mantle bodies from the External Ligurian ophiolites, within the Monte Gavi and Monte Sant'Agostino areas. Here, two distinct pyroxenite-bearing mantle sections were recognized, mainly based on their plagioclase-facies evolution. The Monte Gavi mantle section is nearly undeformed and records reactive melt infiltration under plagioclase-facies conditions. This process involved both peridotites (clinopyroxene-poor lherzolites) and enclosed spinel pyroxenite layers, and occurred at 0.7–0.8 GPa. In the Monte Gavi peridotites and pyroxenites, the spinel-facies clinopyroxene was replaced by Ca-rich plagioclase and new orthopyroxene, typically associated with secondary clinopyroxene. The reactive melt migration caused increase of TiO2 contents in relict clinopyroxene and spinel, with the latter also recording a Cr2O3 increase. In the Monte Gavi peridotites and pyroxenites, geothermometers based on slowly diffusing elements (REE and Y) record high temperature conditions (1200-1250 °C) related to the melt infiltration event, followed by subsolidus cooling until ca. 900°C. The Monte Sant'Agostino mantle section is characterized by widespread ductile shearing with no evidence of melt infiltration. The deformation recorded by the Monte Sant'Agostino peridotites (clinopyroxene-rich lherzolites) occurred at 750–800 °C and 0.3–0.6 GPa, leading to protomylonitic to ultramylonitic textures with extreme grain size reduction (10–50 μm). Compared to the peridotites, the enclosed pyroxenite layers gave higher temperature-pressure estimates for the plagioclase-facies re-equilibration (870–930 °C and 0.8–0.9 GPa). We propose that the earlier plagioclase crystallization in the pyroxenites enhanced strain localization and formation of mylonite shear zones in the entire mantle section. We subdivide the subcontinental mantle section from the External Ligurian ophiolites into three distinct domains, developed in response to the rifting evolution that ultimately formed a Middle Jurassic ocean-continent transition: (1) a spinel tectonite domain, characterized by subsolidus static formation of plagioclase, i.e. the Suvero mantle section (Hidas et al., 2020), (2) a plagioclase mylonite domain experiencing melt-absent deformation and (3) a nearly undeformed domain that underwent reactive melt infiltration under plagioclase-facies conditions, exemplified by the the Monte Sant'Agostino and the Monte Gavi mantle sections, respectively. We relate mantle domains (1) and (2) to a rifting-driven uplift in the late Triassic accommodated by large-scale shear zones consisting of anhydrous plagioclase mylonites. Hidas K., Borghini G., Tommasi A., Zanetti A. & Rampone E. 2021. Interplay between melt infiltration and deformation in the deep lithospheric mantle (External Liguride ophiolite, North Italy). Lithos 380-381, 105855