370 research outputs found

    Camera System Performance Derived from Natural Scenes

    Get PDF
    The Modulation Transfer Function (MTF) is a well-established measure of camera system performance, commonly employed to characterize optical and image capture systems. It is a measure based on Linear System Theory; thus, its use relies on the assumption that the system is linear and stationary. This is not the case with modern-day camera systems that incorporate non-linear image signal processes (ISP) to improve the output image. Non-linearities result in variations in camera system performance, which are dependent upon the specific input signals. This paper discusses the development of a novel framework, designed to acquire MTFs directly from images of natural complex scenes, thus making the use of traditional test charts with set patterns redundant. The framework is based on extraction, characterization and classification of edges found within images of natural scenes. Scene derived performance measures aim to characterize non-linear image processes incorporated in modern cameras more faithfully. Further, they can produce ‘live’ performance measures, acquired directly from camera feeds

    PSF Estimation by Gradient Descent Fit to the ESF

    Get PDF
    Calibration of scanners and cameras usually involves measuring the point spread function (PSF). When edge data is used to measure the PSF, the differentiation step amplifies the noise. A parametric fit of the functional form of the edge spread function (ESF) directly to the measured edge data is proposed to eliminate this. Experiments used to test this method show that the Cauchy functional form fits better than the Gaussian or other forms tried. The effect of using a functional form of the PSF that differs from the true PSF is explored by considering bilevel images formed by thresholding. The amount of mismatch seen can be related to the difference between the respective kurtosis factors

    Integrated Reverse Modeling Techniques for the Survey of Complex Shapes in Industrial Design

    Get PDF
    This chapter proposal deals with three-dimensional survey methods applied to the geometrical acquisition of Industrial Design products. 3D acquisition techniques are defined by well-know procedures that nowadays are applied in a lot of fields, from Mechanics to Aerospace, from Robotics to Cultural Heritage. In the last years the impressive technology evolution used for developing hardware and software allowed to reach excellence peaks in the 3D instruments application. At the same time a lot of experiments and researches were leaded in order to reach a well structured pipeline of reverse modeling process, supporting the process from the real object to its digital mould. In the last decade 3D acquisition and modeling techniques tried to support Industrial Design production, but their role in every single process is not yet systematically codified for some bottlenecks present in the design process and in product knowledge, that will be discussed in the chapter in relation with the state of the art of the current technology. In addition the level of geometrical complexity of any specific product often highlight limitations in the use of a single 3D laser scanner technology, which can’t reach good results with all the typologies of Industrial Design products. These factors are critically framed, outlining the definition of object complexity towards the suited choice of survey methods and technologies for every condition. The actual limits of 3D acquisition systems will be identified and compared to integrate ones (i.e. systems composed by different complementary instruments are used together) applied in different fields, from Car Design to Product Restyling, from Nautical Analysis to Design in Cultural Heritage. The aim of the contribution is to demonstrate the intrinsic limits of a single 3D instrument application and the necessity to apply multi-resolution system or sensor fusion to solve the larger part of the problems in the 3D acquisition of complex shapes

    Edge Detection Techniques for Quantifying Spatial Imaging System Performance and Image Quality

    Get PDF
    Measuring camera system performance and associating it directly to image quality is very relevant, whether images are aimed for viewing, or as input to machine learning and automated recognition algorithms. The Modulation Transfer Function (MTF) is a well- established measure for evaluating this performance. This study proposes a novel methodology for measuring system MTFs directly from natural scenes, by adapting the standardized Slanted Edge Method (ISO 12233). The method involves edge detection techniques, to select and extract suitable step edges from pictorial images. The scene MTF aims to account for camera non-linear scene dependent processes. This measure is more relevant to image quality modelling than the traditionally measured MTFs. Preliminary research results indicate that the proposed method can provide reliable MTFs, following the trends of the ISO 12233. Further development and validation are required before it is proposed as a universal camera measuring technique

    Estimation error in image quality measurements

    Full text link

    Camera Spatial Frequency Response Derived from Pictorial Natural Scenes

    Get PDF
    Camera system performance is a prominent part of many aspects of imaging science and computer vision. There are many aspects to camera performance that determines how accurately the image represents the scene, including measurements of colour accuracy, tone reproduction, geometric distortions, and image noise evaluation. The research conducted in this thesis focuses on the Modulation Transfer Function (MTF), a widely used camera performance measurement employed to describe resolution and sharpness. Traditionally measured under controlled conditions with characterised test charts, the MTF is a measurement restricted to laboratory settings. The MTF is based on linear system theory, meaning the input to output must follow a straightforward correlation. Established methods for measuring the camera system MTF include the ISO12233:2017 for measuring the edge-based Spatial Frequency Response (e-SFR), a sister measure of the MTF designed for measuring discrete systems. Many modern camera systems incorporate non-linear, highly adaptive image signal processing (ISP) to improve image quality. As a result, system performance becomes scene and processing dependant, adapting to the scene contents captured by the camera. Established test chart based MTF/SFR methods do not describe this adaptive nature; they only provide the response of the camera to a test chart signal. Further, with the increased use of Deep Neural Networks (DNN) for image recognition tasks and autonomous vision systems, there is an increased need for monitoring system performance outside laboratory conditions in real-time, i.e. live-MTF. Such measurements would assist in monitoring the camera systems to ensure they are fully operational for decision critical tasks. This thesis presents research conducted to develop a novel automated methodology that estimates the standard e-SFR directly from pictorial natural scenes. This methodology has the potential to produce scene dependant and real-time camera system performance measurements, opening new possibilities in imaging science and allowing live monitoring/calibration of systems for autonomous computer vision applications. The proposed methodology incorporates many well-established image processes, as well as others developed for specific purposes. It is presented in two parts. Firstly, the Natural Scene derived SFR (NS-SFR) are obtained from isolated captured scene step-edges, after verifying that these edges have the correct profile for implementing into the slanted-edge algorithm. The resulting NS-SFRs are shown to be a function of both camera system performance and scene contents. The second part of the methodology uses a series of derived NS-SFRs to estimate the system e-SFR, as per the ISO12233 standard. This is achieved by applying a sequence of thresholds to segment the most likely data corresponding to the system performance. These thresholds a) group the expected optical performance variation across the imaging circle within radial distance segments, b) obtain the highest performance NS-SFRs per segment and c) select the NS-SFRs with input edge and region of interest (ROI) parameter ranges shown to introduce minimal e-SFR variation. The selected NS-SFRs are averaged per radial segment to estimate system e-SFRs across the field of view. A weighted average of these estimates provides an overall system performance estimation. This methodology is implemented for e-SFR estimation of three characterised camera systems, two near-linear and one highly non-linear. Investigations are conducted using large, diverse image datasets as well as restricting scene content and the number of images used for the estimation. The resulting estimates are comparable to ISO12233 e-SFRs derived from test chart inputs for the near-linear systems. Overall estimate stays within one standard deviation of the equivalent test chart measurement. Results from the highly non-linear system indicate scene and processing dependency, potentially leading to a more representative SFR measure than the current chart-based approaches for such systems. These results suggest that the proposed method is a viable alternative to the ISO technique

    Evaluation of changes in image appearance with changes in displayed image size

    Get PDF
    This research focused on the quantification of changes in image appearance when images are displayed at different image sizes on LCD devices. The final results provided in calibrated Just Noticeable Differences (JNDs) on relevant perceptual scales, allowing the prediction of sharpness and contrast appearance with changes in the displayed image size. A series of psychophysical experiments were conducted to enable appearance predictions. Firstly, a rank order experiment was carried out to identify the image attributes that were most affected by changes in displayed image size. Two digital cameras, exhibiting very different reproduction qualities, were employed to capture the same scenes, for the investigation of the effect of the original image quality on image appearance changes. A wide range of scenes with different scene properties was used as a test-set for the investigation of image appearance changes with scene type. The outcomes indicated that sharpness and contrast were the most important attributes for the majority of scene types and original image qualities. Appearance matching experiments were further conducted to quantify changes in perceived sharpness and contrast with respect to changes in the displayed image size. For the creation of sharpness matching stimuli, a set of frequency domain filters were designed to provide equal intervals in image quality, by taking into account the system’s Spatial Frequency Response (SFR) and the observation distance. For the creation of contrast matching stimuli, a series of spatial domain S-shaped filters were designed to provide equal intervals in image contrast, by gamma adjustments. Five displayed image sizes were investigated. Observers were always asked to match the appearance of the smaller version of each stimulus to its larger reference. Lastly, rating experiments were conducted to validate the derived JNDs in perceptual quality for both sharpness and contrast stimuli. Data obtained by these experiments finally converted into JND scales for each individual image attribute. Linear functions were fitted to the final data, which allowed the prediction of image appearance of images viewed at larger sizes than these investigated in this research

    Laser Scanner Technology

    Get PDF
    Laser scanning technology plays an important role in the science and engineering arena. The aim of the scanning is usually to create a digital version of the object surface. Multiple scanning is sometimes performed via multiple cameras to obtain all slides of the scene under study. Usually, optical tests are used to elucidate the power of laser scanning technology in the modern industry and in the research laboratories. This book describes the recent contributions reported by laser scanning technology in different areas around the world. The main topics of laser scanning described in this volume include full body scanning, traffic management, 3D survey process, bridge monitoring, tracking of scanning, human sensing, three-dimensional modelling, glacier monitoring and digitizing heritage monuments
    • …
    corecore