Localisation and tracking of people using distributed UWB sensors

In vielen Überwachungs- und Rettungsszenarien ist die Lokalisierung und Verfolgung von Personen in Innenräumen auf nichtkooperative Weise erforderlich. Für die Erkennung von Objekten durch Wände in kurzer bis mittlerer Entfernung, ist die Ultrabreitband (UWB) Radartechnologie aufgrund ihrer hohen zeitlichen Auflösung und Durchdringungsfähigkeit Erfolg versprechend. In dieser Arbeit wird ein Prozess vorgestellt, mit dem Personen in Innenräumen mittels UWB-Sensoren lokalisiert werden können. Er umfasst neben der Erfassung von Messdaten, Abstandschätzungen und dem Erkennen von Mehrfachzielen auch deren Ortung und Verfolgung. Aufgrund der schwachen Reflektion von Personen im Vergleich zum Rest der Umgebung, wird zur Personenerkennung zuerst eine Hintergrundsubtraktionsmethode verwendet. Danach wird eine konstante Falschalarmrate Methode zur Detektion und Abstandschätzung von Personen angewendet. Für Mehrfachziellokalisierung mit einem UWB-Sensor wird eine Assoziationsmethode entwickelt, um die Schätzungen des Zielabstandes den richtigen Zielen zuzuordnen. In Szenarien mit mehreren Zielen kann es vorkommen, dass ein näher zum Sensor positioniertes Ziel ein anderes abschattet. Ein Konzept für ein verteiltes UWB-Sensornetzwerk wird vorgestellt, in dem sich das Sichtfeld des Systems durch die Verwendung mehrerer Sensoren mit unterschiedlichen Blickfeldern erweitert lässt. Hierbei wurde ein Prototyp entwickelt, der durch Fusion von Sensordaten die Verfolgung von Mehrfachzielen in Echtzeit ermöglicht. Dabei spielen insbesondere auch Synchronisierungs- und Kooperationsaspekte eine entscheidende Rolle. Sensordaten können durch Zeitversatz und systematische Fehler gestört sein. Falschmessungen und Rauschen in den Messungen beeinflussen die Genauigkeit der Schätzergebnisse. Weitere Erkenntnisse über die Zielzustände können durch die Nutzung zeitlicher Informationen gewonnen werden. Ein Mehrfachzielverfolgungssystem wird auf der Grundlage des Wahrscheinlichkeitshypothesenfilters (Probability Hypothesis Density Filter) entwickelt, und die Unterschiede in der Systemleistung werden bezüglich der von den Sensoren ausgegebene Informationen, d.h. die Fusion von Ortungsinformationen und die Fusion von Abstandsinformationen, untersucht. Die Information, dass ein Ziel detektiert werden sollte, wenn es aufgrund von Abschattungen durch andere Ziele im Szenario nicht erkannt wurde, wird als dynamische Überdeckungswahrscheinlichkeit beschrieben. Die dynamische Überdeckungswahrscheinlichkeit wird in das Verfolgungssystem integriert, wodurch weniger Sensoren verwendet werden können, während gleichzeitig die Performanz des Schätzers in diesem Szenario verbessert wird. Bei der Methodenauswahl und -entwicklung wurde die Anforderung einer Echtzeitanwendung bei unbekannten Szenarien berücksichtigt. Jeder untersuchte Aspekt der Mehrpersonenlokalisierung wurde im Rahmen dieser Arbeit mit Hilfe von Simulationen und Messungen in einer realistischen Umgebung mit UWB Sensoren verifiziert.Indoor localisation and tracking of people in non-cooperative manner is important in many surveillance and rescue applications. Ultra wideband (UWB) radar technology is promising for through-wall detection of objects in short to medium distances due to its high temporal resolution and penetration capability. This thesis tackles the problem of localisation of people in indoor scenarios using UWB sensors. It follows the process from measurement acquisition, multiple target detection and range estimation to multiple target localisation and tracking. Due to the weak reflection of people compared to the rest of the environment, a background subtraction method is initially used for the detection of people. Subsequently, a constant false alarm rate method is applied for detection and range estimation of multiple persons. For multiple target localisation using a single UWB sensor, an association method is developed to assign target range estimates to the correct targets. In the presence of multiple targets it can happen that targets closer to the sensor induce shadowing over the environment hindering the detection of other targets. A concept for a distributed UWB sensor network is presented aiming at extending the field of view of the system by using several sensors with different fields of view. A real-time operational prototype has been developed taking into consideration sensor cooperation and synchronisation aspects, as well as fusion of the information provided by all sensors. Sensor data may be erroneous due to sensor bias and time offset. Incorrect measurements and measurement noise influence the accuracy of the estimation results. Additional insight of the targets states can be gained by exploiting temporal information. A multiple person tracking framework is developed based on the probability hypothesis density filter, and the differences in system performance are highlighted with respect to the information provided by the sensors i.e. location information fusion vs range information fusion. The information that a target should have been detected when it is not due to shadowing induced by other targets is described as dynamic occlusion probability. The dynamic occlusion probability is incorporated into the tracking framework, allowing fewer sensors to be used while improving the tracker performance in the scenario. The method selection and development has taken into consideration real-time application requirements for unknown scenarios at every step. Each investigated aspect of multiple person localization within the scope of this thesis has been verified using simulations and measurements in a realistic environment using M-sequence UWB sensors

Multi Sensor Multi Target Perception and Tracking for Informed Decisions in Public Road Scenarios

Multi-target tracking in public traffic calls for a tracking system with automated track initiation and termination facilities in a randomly evolving driving environment. Besides, the key problem of data association needs to be handled effectively considering the limitations in the computational resources on-board an autonomous car. The challenge of the tracking problem is further evident in the use of high-resolution automotive sensors which return multiple detections per object. Furthermore, it is customary to use multiple sensors that cover different and/or over-lapping Field of View and fuse sensor detections to provide robust and reliable tracking. As a consequence, in high-resolution multi-sensor settings, the data association uncertainty, and the corresponding tracking complexity increases pointing to a systematic approach to handle and process sensor detections. In this work, we present a multi-target tracking system that addresses target birth/initiation and death/termination processes with automatic track management features. These tracking functionalities can help facilitate perception during common events in public traffic as participants (suddenly) change lanes, navigate intersections, overtake and/or brake in emergencies, etc. Various tracking approaches including the ones based on joint integrated probability data association (JIPDA) filter, Linear Multi-target Integrated Probabilistic Data Association (LMIPDA) Filter, and their multi-detection variants are adapted to specifically include algorithms that handle track initiation and termination, clutter density estimation and track management. The utility of the filtering module is further elaborated by integrating it into a trajectory tracking problem based on model predictive control. To cope with tracking complexity in the case of multiple high-resolution sensors, we propose a hybrid scheme that combines the approaches of data clustering at the local sensor and multiple detections tracking schemes at the fusion layer. We implement a track-to-track fusion scheme that de-correlates local (sensor) tracks to avoid double counting and apply a measurement partitioning scheme to re-purpose the LMIPDA tracking algorithm to multi-detection cases. In addition to the measurement partitioning approach, a joint extent and kinematic state estimation scheme are integrated into the LMIPDA approach to facilitate perception and tracking of an individual as well as group targets as applied to multi-lane public traffic. We formulate the tracking problem as a two hierarchical layer. This arrangement enhances the multi-target tracking performance in situations including but not limited to target initialization(birth process), target occlusion, missed detections, unresolved measurement, target maneuver, etc. Also, target groups expose complex individual target interactions to help in situation assessment which is challenging to capture otherwise. The simulation studies are complemented by experimental studies performed on single and multiple (group) targets. Target detections are collected from a high-resolution radar at a frequency of 20Hz; whereas RTK-GPS data is made available as ground truth for one of the target vehicle\u27s trajectory

GM-PHD Filter Based Sensor Data Fusion for Automotive Frontal Perception System

Advanced driver assistance systems and highly automated driving functions require an enhanced frontal perception system. The requirements of a frontal environment perception system cannot be satisfied by either of the existing automotive sensors. A commonly used sensor cluster for these functions consists of a mono-vision smart camera and automotive radar. The sensor fusion is intended to combine the data of these sensors to perform a robust environment perception. Multi-object tracking algorithms have a suitable software architecture for sensor data fusion. Several multi-object tracking algorithms, such as JPDAF or MHT, have good tracking performance; however, the computational requirements of these algorithms are significant according to their combinatorial complexity. The GM-PHD filter is a straightforward algorithm with favorable runtime characteristics that can track an unknown and timevarying number of objects. However, the conventional GM-PHD\ud filter has a poor performance in object cardinality estimation. This paper proposes a method that extends the GM-PHD filter with an object birth model that relies on the sensor detections and a robust object extraction module, including Bayesian estimation of objects’ existence probability to compensate for drawbacks of the conventional algorithm

Single to multiple target, multiple type visual tracking

Visual tracking is a key task in applications such as intelligent surveillance, humancomputer interaction (HCI), human-robot interaction (HRI), augmented reality (AR), driver assistance systems, and medical applications. In this thesis, we make three main novel contributions for target tracking in video sequences. First, we develop a long-term model-free single target tracking by learning discriminative correlation filters and an online classifier that can track a target of interest in both sparse and crowded scenes. In this case, we learn two different correlation filters, translation and scale correlation filters, using different visual features. We also include a re-detection module that can re-initialize the tracker in case of tracking failures due to long-term occlusions. Second, a multiple target, multiple type filtering algorithm is developed using Random Finite Set (RFS) theory. In particular, we extend the standard Probability Hypothesis Density (PHD) filter for multiple type of targets, each with distinct detection properties, to develop multiple target, multiple type filtering, N-type PHD filter, where N ≥ 2, for handling confusions that can occur among target types at the measurements level. This method takes into account not only background false positives (clutter), but also confusions between target detections, which are in general different in character from background clutter. Then, under the assumptions of Gaussianity and linearity, we extend Gaussian mixture (GM) implementation of the standard PHD filter for the proposed N-type PHD filter termed as N-type GM-PHD filter. Third, we apply this N-type GM-PHD filter to real video sequences by integrating object detectors’ information into this filter for two scenarios. In the first scenario, a tri-GM-PHD filter is applied to real video sequences containing three types of multiple targets in the same scene, two football teams and a referee, using separate but confused detections. In the second scenario, we use a dual GM-PHD filter for tracking pedestrians and vehicles in the same scene handling their detectors’ confusions. For both cases, Munkres’s variant of the Hungarian assignment algorithm is used to associate tracked target identities between frames. We make extensive evaluations of these developed algorithms and find out that our methods outperform their corresponding state-of-the-art approaches by a large margin.EPSR

Tracking interacting targets in multi-modal sensors

PhDObject tracking is one of the fundamental tasks in various applications such as surveillance, sports, video conferencing and activity recognition. Factors such as occlusions, illumination changes and limited field of observance of the sensor make tracking a challenging task. To overcome these challenges the focus of this thesis is on using multiple modalities such as audio and video for multi-target, multi-modal tracking. Particularly, this thesis presents contributions to four related research topics, namely, pre-processing of input signals to reduce noise, multi-modal tracking, simultaneous detection and tracking, and interaction recognition. To improve the performance of detection algorithms, especially in the presence of noise, this thesis investigate filtering of the input data through spatio-temporal feature analysis as well as through frequency band analysis. The pre-processed data from multiple modalities is then fused within Particle filtering (PF). To further minimise the discrepancy between the real and the estimated positions, we propose a strategy that associates the hypotheses and the measurements with a real target, using a Weighted Probabilistic Data Association (WPDA). Since the filtering involved in the detection process reduces the available information and is inapplicable on low signal-to-noise ratio data, we investigate simultaneous detection and tracking approaches and propose a multi-target track-beforedetect Particle filtering (MT-TBD-PF). The proposed MT-TBD-PF algorithm bypasses the detection step and performs tracking in the raw signal. Finally, we apply the proposed multi-modal tracking to recognise interactions between targets in regions within, as well as outside the cameras’ fields of view. The efficiency of the proposed approaches are demonstrated on large uni-modal, multi-modal and multi-sensor scenarios from real world detections, tracking and event recognition datasets and through participation in evaluation campaigns

PHD Filter for Object Tracking in Road Traffic Applications Considering Varying Detectability

This paper considers the object detection and tracking problem in a road traffic situation from a traffic participant’s perspective. The information source is an automotive radar which is attached to the ego vehicle. The scenario characteristics are varying object visibility due to occlusion and multiple detections of a vehicle during a scanning interval. The goal is to maintain and report the state of undetected though possibly present objects. The proposed algorithm is based on the multi-object Probability Hypothesis Density filter. Because the PHD filter has no memory, the estimate of the number of objects present can change abruptly due to erroneous detections. To reduce this effect, we model the occlusion of the object to calculate the state-dependent detection probability. Thus, the filter can maintain unnoticed but probably valid hypotheses for a more extended period. We use the sequential Monte Carlo method with clustering for implementing the filter. We distinguish between detected, undetected, and hidden particles within our framework, whose purpose is to track hidden but likely present objects. The performance of the algorithm is demonstrated using highway radar measurements

Acoustic source localisation and tracking using microphone arrays

This thesis considers the domain of acoustic source localisation and tracking in an indoor environment. Acoustic tracking has applications in security, human-computer interaction, and the diarisation of meetings. Source localisation and tracking is typically a computationally expensive task, making it hard to process on-line, especially as the number of speakers to track increases. Much of the literature considers single-source localisation, however a practical system must be able to cope with multiple speakers, possibly active simultaneously, without knowing beforehand how many speakers are present. Techniques are explored for reducing the computational requirements of an acoustic localisation system. Techniques to localise and track multiple active sources are also explored, and developed to be more computationally efficient than the current state of the art algorithms, whilst being able to track more speakers. The first contribution is the modification of a recent single-speaker source localisation technique, which improves the localisation speed. This is achieved by formalising the implicit assumption by the modified algorithm that speaker height is uniformly distributed on the vertical axis. Estimating height information effectively reduces the search space where speakers have previously been detected, but who may have moved over the horizontal-plane, and are unlikely to have significantly changed height. This is developed to allow multiple non-simultaneously active sources to be located. This is applicable when the system is given information from a secondary source such as a set of cameras allowing the efficient identification of active speakers rather than just the locations of people in the environment. The next contribution of the thesis is the application of a particle swarm technique to significantly further decrease the computational cost of localising a single source in an indoor environment, compared the state of the art. Several variants of the particle swarm technique are explored, including novel variants designed specifically for localising acoustic sources. Each method is characterised in terms of its computational complexity as well as the average localisation error. The techniques’ responses to acoustic noise are also considered, and they are found to be robust. A further contribution is made by using multi-optima swarm techniques to localise multiple simultaneously active sources. This makes use of techniques which extend the single-source particle swarm techniques to finding multiple optima of the acoustic objective function. Several techniques are investigated and their performance in terms of localisation accuracy and computational complexity is characterised. Consideration is also given to how these metrics change when an increasing number of active speakers are to be localised. Finally, the application of the multi-optima localisation methods as an input to a multi-target tracking system is presented. Tracking multiple speakers is a more complex task than tracking single acoustic source, as observations of audio activity must be associated in some way with distinct speakers. The tracker used is known to be a relatively efficient technique, and the nature of the multi-optima output format is modified to allow the application of this technique to the task of speaker tracking

Analysing Large-scale Surveillance Video

Analysing large-scale surveillance video has drawn signi cant attention because drone technology and high-resolution sensors are rapidly improving. The mobility of drones makes it possible to monitor a broad range of the environment, but it introduces a more di cult problem of identifying the objects of interest. This thesis aims to detect the moving objects (mostly vehicles) using the idea of background subtraction. Building a decent background is the key to success during the process. We consider two categories of surveillance videos in this thesis: when the scene is at and when pronounced parallax exists. After reviewing several global motion estimation approaches, we propose a novel cost function, the log-likelihood of the student t-distribution, to estimate the background motion between two frames. The proposed idea enables the estimation process to be e cient and robust with auto-generated parameters. Since the particle lter is useful in various subjects, it is investigated in this thesis. An improvement to particle lters, combining near-optimal proposal and Rao-Blackwellisation, is discussed to increase the e ciency when dealing with non-linear problems. Such improvement is used to solve visual simultaneous localisation and mapping (SLAM) problems and we call it RB2-PF. Its superiority is evident in both simulations of 2D SLAM and real datasets of visual odometry problems. Finally, RB2-PF based visual odometry is the key component to detect moving objects from surveillance videos with pronounced parallax. The idea is to consider multiple planes in the scene to improve the background motion estimation. Experiments have shown that false alarms signi cantly reduced. With the landmark information, a ground plane can be worked out. A near-constant velocity model can be applied after mapping the detections on the ground plane regardless of the position and orientation of the camera. All the detection results are nally processed by a multi-target tracker, the Gaussian mixture probabilistic hypothesis density (GM-PHD) lter, to generate tracks

Exploring space situational awareness using neuromorphic event-based cameras

The orbits around earth are a limited natural resource and one that hosts a vast range of vital space-based systems that support international systems use by both commercial industries, civil organisations, and national defence. The availability of this space resource is rapidly depleting due to the ever-growing presence of space debris and rampant overcrowding, especially in the limited and highly desirable slots in geosynchronous orbit. The field of Space Situational Awareness encompasses tasks aimed at mitigating these hazards to on-orbit systems through the monitoring of satellite traffic. Essential to this task is the collection of accurate and timely observation data. This thesis explores the use of a novel sensor paradigm to optically collect and process sensor data to enhance and improve space situational awareness tasks. Solving this issue is critical to ensure that we can continue to utilise the space environment in a sustainable way. However, these tasks pose significant engineering challenges that involve the detection and characterisation of faint, highly distant, and high-speed targets. Recent advances in neuromorphic engineering have led to the availability of high-quality neuromorphic event-based cameras that provide a promising alternative to the conventional cameras used in space imaging. These cameras offer the potential to improve the capabilities of existing space tracking systems and have been shown to detect and track satellites or ‘Resident Space Objects’ at low data rates, high temporal resolutions, and in conditions typically unsuitable for conventional optical cameras. This thesis presents a thorough exploration of neuromorphic event-based cameras for space situational awareness tasks and establishes a rigorous foundation for event-based space imaging. The work conducted in this project demonstrates how to enable event-based space imaging systems that serve the goals of space situational awareness by providing accurate and timely information on the space domain. By developing and implementing event-based processing techniques, the asynchronous operation, high temporal resolution, and dynamic range of these novel sensors are leveraged to provide low latency target acquisition and rapid reaction to challenging satellite tracking scenarios. The algorithms and experiments developed in this thesis successfully study the properties and trade-offs of event-based space imaging and provide comparisons with traditional observing methods and conventional frame-based sensors. The outcomes of this thesis demonstrate the viability of event-based cameras for use in tracking and space imaging tasks and therefore contribute to the growing efforts of the international space situational awareness community and the development of the event-based technology in astronomy and space science applications

Activity Analysis; Finding Explanations for Sets of Events

Automatic activity recognition is the computational process of analysing visual input and reasoning about detections to understand the performed events. In all but the simplest scenarios, an activity involves multiple interleaved events, some related and others independent. The activity in a car park or at a playground would typically include many events. This research assumes the possible events and any constraints between the events can be defined for the given scene. Analysing the activity should thus recognise a complete and consistent set of events; this is referred to as a global explanation of the activity. By seeking a global explanation that satisfies the activity’s constraints, infeasible interpretations can be avoided, and ambiguous observations may be resolved. An activity’s events and any natural constraints are defined using a grammar formalism. Attribute Multiset Grammars (AMG) are chosen because they allow defining hierarchies, as well as attribute rules and constraints. When used for recognition, detectors are employed to gather a set of detections. Parsing the set of detections by the AMG provides a global explanation. To find the best parse tree given a set of detections, a Bayesian network models the probability distribution over the space of possible parse trees. Heuristic and exhaustive search techniques are proposed to find the maximum a posteriori global explanation. The framework is tested for two activities: the activity in a bicycle rack, and around a building entrance. The first case study involves people locking bicycles onto a bicycle rack and picking them up later. The best global explanation for all detections gathered during the day resolves local ambiguities from occlusion or clutter. Intensive testing on 5 full days proved global analysis achieves higher recognition rates. The second case study tracks people and any objects they are carrying as they enter and exit a building entrance. A complete sequence of the person entering and exiting multiple times is recovered by the global explanation