The Role of the Internet of Things in Network Resilience

Disasters lead to devastating structural damage not only to buildings and transport infrastructure, but also to other critical infrastructure, such as the power grid and communication backbones. Following such an event, the availability of minimal communication services is however crucial to allow efficient and coordinated disaster response, to enable timely public information, or to provide individuals in need with a default mechanism to post emergency messages. The Internet of Things consists in the massive deployment of heterogeneous devices, most of which battery-powered, and interconnected via wireless network interfaces. Typical IoT communication architectures enables such IoT devices to not only connect to the communication backbone (i.e. the Internet) using an infrastructure-based wireless network paradigm, but also to communicate with one another autonomously, without the help of any infrastructure, using a spontaneous wireless network paradigm. In this paper, we argue that the vast deployment of IoT-enabled devices could bring benefits in terms of data network resilience in face of disaster. Leveraging their spontaneous wireless networking capabilities, IoT devices could enable minimal communication services (e.g. emergency micro-message delivery) while the conventional communication infrastructure is out of service. We identify the main challenges that must be addressed in order to realize this potential in practice. These challenges concern various technical aspects, including physical connectivity requirements, network protocol stack enhancements, data traffic prioritization schemes, as well as social and political aspects

A Multi-Hop 6LoWPAN Wireless Sensor Network for Waste Management Optimization

In the first part of this Thesis several Wireless Sensor Network technologies, including the ones based on the IEEE 802.15.4 Protocol Standard like ZigBee, 6LoWPAN and Ultra Wide Band, as well as other technologies based on other protocol standards like Z-Wave, Bluetooth and Dash7, are analyzed with respect to relevance and suitability with the Waste Management Outsmart European FP7 Project. A particular attention is given to the parameters which characterize a Large Scale WSN for Smart Cities, due to the amount of sensors involved and to the practical application requested by the project. Secondly, a prototype of sensor network is proposed: an Operative System named Contiki is chosen for its portability on different hardware platforms, its Open Source license, for the use of the 6LoW-PAN protocol and for the implementation of the new RPL routing protocol. The Operative System is described in detail, with a special focus on the uIPv6 TCP/IP stack and RPL implementation. With regard to this innovative routing proto col designed specifically for Low Power Lossy Networks, chapter 4 describes in detail how the network topology is organized as a Directed Acyclic Graph, what is an RPL Instance and how downward and upward routes are constructed and maintained. With the use of several AVR Atmel modules mounting the Contiki OS a real WSN is created and, with an Ultrasonic Sensor, the filling level of a waste basket prototype is periodically detected and transmitted through a multi-hop wireless network to a sink nodeope

Analysis of current and potential sensor network technologies and their incorporation as embedded structural system

This document provides a brief overview of the actual wireless ad hoc sensor networks technologies and standards available, especially in view of their possible implementation for shipping container protection and monitoring within the framework of the STEC Action aiming at analyzing possible technical solutions to improve the security of the millions of containers moving in and out of Europe. Examples of applications and research projects are reported from the literature to give insights on the possibility of implementation of wireless sensor networks in real world scenarios.JRC.G.5-European laboratory for structural assessmen

RSSI Based Indoor Passive Localization for Intrusion Detection and Tracking

A real time system for intrusion detection and tracking based on wireless sensor network technology is designed by using the IITH mote which is de- veloped and designed in IIT Hyderabad as the communication module in the network.This paper describes the Device-Free Passive Localization system based on RSSI.The main objective of this paper is to design a DFP Local- ization system that is easily redeployable, recon�gurable, easy to use, and operates in real time. In addition the detection of humans is to be done.The em- bedded intrusion detection algorithm is designed so that it is able to cope with the limited resources, in terms of computational power and available memory space, of the microcontroller unit (MCU) found in the nodes. and various challenges and problem faced during the real test bed deployment and also proposed solutions to overcome them.We presented an alternative algo- rithm based on the minimum Euclidean distance classi�er.our result shows that the localization accuracy of this system is increased when using the proposed algorith

Sharing is caring: a cooperation scheme for RPL network resilience and efficiency

International audienceThe IPv6 Routing Protocol for Low-Power and Lossy Networks (RPL) builds a Direction Oriented Directed Acyclic Graph (DODAG) rooted at one node.This node may act as a border router to provide Internet connectivity to the members of the DODAG but such a situation creates a single point of failure.Upon border router failure, all nodes connected to the DODAG are affected as all ongoing communications are instantly broken and no new communications can be initiated.Moreover, nodes close to the border router should forward traffic from farther nodes in addition to their own, which may cause congestion and energy depletion inequality.In this article we specify a full solution to enable border router redundancy in RPL networks.To achieve this, we propose a mechanism leveraging cooperation between colocated RPL networks.It enables failover to maintain Internet connectivity and load balancing to improve the overall energy consumption and bandwidth.Our contribution has been implemented in Contiki OS and was evaluated through experiments performed on the FIT IoT-LAB testbed

Internet of Things From Hype to Reality

The Internet of Things (IoT) has gained significant mindshare, let alone attention, in academia and the industry especially over the past few years. The reasons behind this interest are the potential capabilities that IoT promises to offer. On the personal level, it paints a picture of a future world where all the things in our ambient environment are connected to the Internet and seamlessly communicate with each other to operate intelligently. The ultimate goal is to enable objects around us to efficiently sense our surroundings, inexpensively communicate, and ultimately create a better environment for us: one where everyday objects act based on what we need and like without explicit instructions

Cooperation between multiple RPL networks

International audienc

Low-Power Wireless for the Internet of Things: Standards and Applications: Internet of Things, IEEE 802.15.4, Bluetooth, Physical layer, Medium Access Control,coexistence, mesh networking, cyber-physical systems, WSN, M2M

International audienceThe proliferation of embedded systems, wireless technologies, and Internet protocols have enabled the Internet of Things (IoT) to bridge the gap between the virtual and physical world through enabling the monitoring and actuation of the physical world controlled by data processing systems. Wireless technologies, despite their offered convenience, flexibility, low cost, and mobility pose unique challenges such as fading, interference, energy, and security, which must be carefully addressed when using resource-constrained IoT devices. To this end, the efforts of the research community have led to the standardization of several wireless technologies for various types of application domains depending on factors such as reliability, latency, scalability, and energy efficiency. In this paper, we first overview these standard wireless technologies, and we specifically study the MAC and physical layer technologies proposed to address the requirements and challenges of wireless communications. Furthermore, we explain the use of these standards in various application domains, such as smart homes, smart healthcare, industrial automation, and smart cities, and discuss their suitability in satisfying the requirements of these applications. In addition to proposing guidelines to weigh the pros and cons of each standard for an application at hand, we also examine what new strategies can be exploited to overcome existing challenges and support emerging IoT applications