Low Power Adaptive Equaliser Architectures for Wireless LMMSE Receivers

Power consumption requires critical consideration during system design for portable wireless communication devices as it has a direct influence on the battery weight and volume required for operation. Wideband Code Division Multiple Access (W-CDMA) techniques are favoured for use in future generation mobile communication systems. This thesis investigates novel low power techniques for use in system blocks within a W-CDMA adaptive linear minimum mean squared error (LMMSE) receiver architecture. Two low power techniques are presented for reducing power dissipation in the LMS adaptive filter, this being the main power consuming block within this receiver. These low power techniques are namely the decorrelating transform, this is a differential coefficient technique, and the variable length update algorithm which is a dynamic tap-length optimisation technique. The decorrelating transform is based on the principle of reducing the wordlength of filter coefficients by using the computed difference between adjacent coefficients in calculation of the filter output. The effect of reducing the wordlength of filter coefficients being presented to multipliers in the filter is a reduction in switching activity within the multiplier thus reducing power consumed. In the case of the LMS adaptive filter, with coefficients being continuously updated, the decorrelating transform is applied to these calculated coefficients with minimal hardware or computational overhead. The correlation between filter coefficients is exploited to achieve a wordlength reduction from 16 bits down to 10 bits in the FIR filter block. The variable length update algorithm is based on the principle of optimising the number of operational filter taps in the LMS adaptive filter according to operating conditions. The number of taps in operation can be increased or decreased dynamically according to the mean squared error at the output of the filter. This algorithm is used to exploit the fact that when the SNR in the channel is low the minimum mean squared error of the short equaliser is almost the same as that of the longer equaliser. Therefore, minimising the length of the equaliser will not result in poorer MSE performance and there is no disadvantage in having fewer taps in operation. If fewer taps are in operation then switching will not only be reduced in the arithmetic blocks but also in the memory blocks required by the LMS algorithm and FIR filter process. This reduces the power consumed by both these computation intensive functional blocks. Power results are obtained for equaliser lengths from 73 to 16 taps and for operation with varying input SNR. This thesis then proposes that the variable length LMS adaptive filter is applied in the adaptive LMMSE receiver to create a low power implementation. Power consumption in the receiver is reduced by the dynamic optimisation of the LMS receiver coefficient calculation. A considerable power saving is seen to be achieved when moving from a fixed length LMS implementation to the variable length design. All design architectures are coded in Verilog hardware description language at register transfer level (RTL). Once functional specification of the design is verified, synthesis is carried out using either Synopsys DesignCompiler or Cadence BuildGates to create a gate level netlist. Power consumption results are determined at the gate level and estimated using the Synopsys DesignPower tool

Energy efficient hardware acceleration of multimedia processing tools

The world of mobile devices is experiencing an ongoing trend of feature enhancement and generalpurpose multimedia platform convergence. This trend poses many grand challenges, the most pressing being their limited battery life as a consequence of delivering computationally demanding features. The envisaged mobile application features can be considered to be accelerated by a set of underpinning hardware blocks Based on the survey that this thesis presents on modem video compression standards and their associated enabling technologies, it is concluded that tight energy and throughput constraints can still be effectively tackled at algorithmic level in order to design re-usable optimised hardware acceleration cores. To prove these conclusions, the work m this thesis is focused on two of the basic enabling technologies that support mobile video applications, namely the Shape Adaptive Discrete Cosine Transform (SA-DCT) and its inverse, the SA-IDCT. The hardware architectures presented in this work have been designed with energy efficiency in mind. This goal is achieved by employing high level techniques such as redundant computation elimination, parallelism and low switching computation structures. Both architectures compare favourably against the relevant pnor art in the literature. The SA-DCT/IDCT technologies are instances of a more general computation - namely, both are Constant Matrix Multiplication (CMM) operations. Thus, this thesis also proposes an algorithm for the efficient hardware design of any general CMM-based enabling technology. The proposed algorithm leverages the effective solution search capability of genetic programming. A bonus feature of the proposed modelling approach is that it is further amenable to hardware acceleration. Another bonus feature is an early exit mechanism that achieves large search space reductions .Results show an improvement on state of the art algorithms with future potential for even greater savings

Image Processing Using FPGAs

This book presents a selection of papers representing current research on using field programmable gate arrays (FPGAs) for realising image processing algorithms. These papers are reprints of papers selected for a Special Issue of the Journal of Imaging on image processing using FPGAs. A diverse range of topics is covered, including parallel soft processors, memory management, image filters, segmentation, clustering, image analysis, and image compression. Applications include traffic sign recognition for autonomous driving, cell detection for histopathology, and video compression. Collectively, they represent the current state-of-the-art on image processing using FPGAs

Efficient FPGA implementation and power modelling of image and signal processing IP cores

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.Field Programmable Gate Arrays (FPGAs) are the technology of choice in a number ofimage and signal processing application areas such as consumer electronics, instrumentation, medical data processing and avionics due to their reasonable energy consumption, high performance, security, low design-turnaround time and reconfigurability. Low power FPGA devices are also emerging as competitive solutions for mobile and thermally constrained platforms. Most computationally intensive image and signal processing algorithms also consume a lot of power leading to a number of issues including reduced mobility, reliability concerns and increased design cost among others. Power dissipation has become one of the most important challenges, particularly for FPGAs. Addressing this problem requires optimisation and awareness at all levels in the design flow. The key achievements of the work presented in this thesis are summarised here. Behavioural level optimisation strategies have been used for implementing matrix product and inner product through the use of mathematical techniques such as Distributed Arithmetic (DA) and its variations including offset binary coding, sparse factorisation and novel vector level transformations. Applications to test the impact of these algorithmic and arithmetic transformations include the fast Hadamard/Walsh transforms and Gaussian mixture models. Complete design space exploration has been performed on these cores, and where appropriate, they have been shown to clearly outperform comparable existing implementations. At the architectural level, strategies such as parallelism, pipelining and systolisation have been successfully applied for the design and optimisation of a number of cores including colour space conversion, finite Radon transform, finite ridgelet transform and circular convolution. A pioneering study into the influence of supply voltage scaling for FPGA based designs, used in conjunction with performance enhancing strategies such as parallelism and pipelining has been performed. Initial results are very promising and indicated significant potential for future research in this area. A key contribution of this work includes the development of a novel high level power macromodelling technique for design space exploration and characterisation of custom IP cores for FPGAs, called Functional Level Power Analysis and Modelling (FLPAM). FLPAM is scalable, platform independent and compares favourably with existing approaches. A hybrid, top-down design flow paradigm integrating FLPAM with commercially available design tools for systematic optimisation of IP cores has also been developed

KAVUAKA: a low-power application-specific processor architecture for digital hearing aids

The power consumption of digital hearing aids is very restricted due to their small physical size and the available hardware resources for signal processing are limited. However, there is a demand for more processing performance to make future hearing aids more useful and smarter. Future hearing aids should be able to detect, localize, and recognize target speakers in complex acoustic environments to further improve the speech intelligibility of the individual hearing aid user. Computationally intensive algorithms are required for this task. To maintain acceptable battery life, the hearing aid processing architecture must be highly optimized for extremely low-power consumption and high processing performance.The integration of application-specific instruction-set processors (ASIPs) into hearing aids enables a wide range of architectural customizations to meet the stringent power consumption and performance requirements. In this thesis, the application-specific hearing aid processor KAVUAKA is presented, which is customized and optimized with state-of-the-art hearing aid algorithms such as speaker localization, noise reduction, beamforming algorithms, and speech recognition. Specialized and application-specific instructions are designed and added to the baseline instruction set architecture (ISA). Among the major contributions are a multiply-accumulate (MAC) unit for real- and complex-valued numbers, architectures for power reduction during register accesses, co-processors and a low-latency audio interface. With the proposed MAC architecture, the KAVUAKA processor requires 16 % less cycles for the computation of a 128-point fast Fourier transform (FFT) compared to related programmable digital signal processors. The power consumption during register file accesses is decreased by 6 %to 17 % with isolation and by-pass techniques. The hardware-induced audio latency is 34 %lower compared to related audio interfaces for frame size of 64 samples.The final hearing aid system-on-chip (SoC) with four KAVUAKA processor cores and ten co-processors is integrated as an application-specific integrated circuit (ASIC) using a 40 nm low-power technology. The die size is 3.6 mm2. Each of the processors and co-processors contains individual customizations and hardware features with a varying datapath width between 24-bit to 64-bit. The core area of the 64-bit processor configuration is 0.134 mm2. The processors are organized in two clusters that share memory, an audio interface, co-processors and serial interfaces. The average power consumption at a clock speed of 10 MHz is 2.4 mW for SoC and 0.6 mW for the 64-bit processor.Case studies with four reference hearing aid algorithms are used to present and evaluate the proposed hardware architectures and optimizations. The program code for each processor and co-processor is generated and optimized with evolutionary algorithms for operation merging,instruction scheduling and register allocation. The KAVUAKA processor architecture is com-pared to related processor architectures in terms of processing performance, average power consumption, and silicon area requirements

Compiler techniques for scalable performance of stream programs on multicore architectures

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2010.Cataloged from PDF version of thesis.Includes bibliographical references (p. 211-222).Given the ubiquity of multicore processors, there is an acute need to enable the development of scalable parallel applications without unduly burdening programmers. Currently, programmers are asked not only to explicitly expose parallelism but also concern themselves with issues of granularity, load-balancing, synchronization, and communication. This thesis demonstrates that when algorithmic parallelism is expressed in the form of a stream program, a compiler can effectively and automatically manage the parallelism. Our compiler assumes responsibility for low-level architectural details, transforming implicit algorithmic parallelism into a mapping that achieves scalable parallel performance for a given multicore target. Stream programming is characterized by regular processing of sequences of data, and it is a natural expression of algorithms in the areas of audio, video, digital signal processing, networking, and encryption. Streaming computation is represented as a graph of independent computation nodes that communicate explicitly over data channels. Our techniques operate on contiguous regions of the stream graph where the input and output rates of the nodes are statically determinable. Within a static region, the compiler first automatically adjusts the granularity and then exploits data, task, and pipeline parallelism in a holistic fashion. We introduce techniques that data-parallelize nodes that operate on overlapping sliding windows of their input, translating serializing state into minimal and parametrized inter-core communication. Finally, for nodes that cannot be data-parallelized due to state, we are the first to automatically apply software-pipelining techniques at a coarse granularity to exploit pipeline parallelism between stateful nodes. Our framework is evaluated in the context of the StreamIt programming language. StreamIt is a high-level stream programming language that has been shown to improve programmer productivity in implementing streaming algorithms. We employ the StreamIt Core benchmark suite of 12 real-world applications to demonstrate the effectiveness of our techniques for varying multicore architectures. For a 16-core distributed memory multicore, we achieve a 14.9x mean speedup. For benchmarks that include sliding-window computation, our sliding-window data-parallelization techniques are required to enable scalable performance for a 16-core SMP multicore (14x mean speedup) and a 64-core distributed shared memory multicore (52x mean speedup).by Michael I. Gordon.Ph.D

Efficient FPGA implementation and power modelling of image and signal processing IP cores

Field Programmable Gate Arrays (FPGAs) are the technology of choice in a number ofimage and signal processing application areas such as consumer electronics, instrumentation, medical data processing and avionics due to their reasonable energy consumption, high performance, security, low design-turnaround time and reconfigurability. Low power FPGA devices are also emerging as competitive solutions for mobile and thermally constrained platforms. Most computationally intensive image and signal processing algorithms also consume a lot of power leading to a number of issues including reduced mobility, reliability concerns and increased design cost among others. Power dissipation has become one of the most important challenges, particularly for FPGAs. Addressing this problem requires optimisation and awareness at all levels in the design flow. The key achievements of the work presented in this thesis are summarised here. Behavioural level optimisation strategies have been used for implementing matrix product and inner product through the use of mathematical techniques such as Distributed Arithmetic (DA) and its variations including offset binary coding, sparse factorisation and novel vector level transformations. Applications to test the impact of these algorithmic and arithmetic transformations include the fast Hadamard/Walsh transforms and Gaussian mixture models. Complete design space exploration has been performed on these cores, and where appropriate, they have been shown to clearly outperform comparable existing implementations. At the architectural level, strategies such as parallelism, pipelining and systolisation have been successfully applied for the design and optimisation of a number of cores including colour space conversion, finite Radon transform, finite ridgelet transform and circular convolution. A pioneering study into the influence of supply voltage scaling for FPGA based designs, used in conjunction with performance enhancing strategies such as parallelism and pipelining has been performed. Initial results are very promising and indicated significant potential for future research in this area. A key contribution of this work includes the development of a novel high level power macromodelling technique for design space exploration and characterisation of custom IP cores for FPGAs, called Functional Level Power Analysis and Modelling (FLPAM). FLPAM is scalable, platform independent and compares favourably with existing approaches. A hybrid, top-down design flow paradigm integrating FLPAM with commercially available design tools for systematic optimisation of IP cores has also been developed.EThOS - Electronic Theses Online ServiceGBUnited Kingdo