178 research outputs found
Recommended from our members
Design of interface selection protocols for multi-homed wireless networks
This thesis was submitted for the degree of Doctor of Philosophy and was awarded by Brunel University on 10 December 2010.The IEEE 802.11/802.16 standards conformant wireless communication stations have multi-homing transmission capability. To achieve greater communication efficiency, multi-homing capable stations use handover mechanism to select appropriate transmission channel according to variations in the channel quality. This thesis presents three internal-linked handover schemes, (1) Interface Selection Protocol (ISP), belonging to Wireless Local Area Network (WLAN)- Worldwide Interoperability for Microwave Access (WiMAX) environment (2) Fast Channel Scanning (FCS) and (3) Traffic Manager (TM), (2) and (3) belonging to WiMAX Environment. The proposed schemes in this thesis use a novel mechanism of providing a reliable communication route. This solution is based on a cross-layer communication framework, where the interface selection module uses various network related parameters from Medium Access Control (MAC) sub-layer/Physical Layer (PHY) across the protocol suite for decision making at the Network layer. The proposed solutions are highly responsive when compared with existing multi-homed schemes; responsiveness is one of the key factors in the design of such protocols. Selected route under these schemes is based on the most up to date link-layer information. Therefore, such a route is not only reliable in terms of route optimization but it also fulfils the application demands in terms of throughput and delay. Design of ISP protocol use probing frames during the route discovery process. The 802.11 mandates the use of different rates for data transmission frames. The ISP-metric can be incorporated into various routing aspects and its applicability is determined by the possibility of provision of MAC dependent parameters that are used to determine the best path metric values. In many cases, higher device density, interference and mobility cause variable medium access delays. It causes creation of ‘unreachable zones’, where destination is marked as unreachable. However, by use of the best path metric, the destination has been made reachable, anytime and anywhere, because of the intelligent use of the probing frames and interface selection algorithm implemented. The IEEE 802.16e introduces several MAC level queues for different access categories, maintaining service requirement within these queues; which imply that frames from a higher priority queue, i.e. video frames, are serviced more frequently than those belonging to lower priority queues. Such an enhancement at the MAC sub-layer introduces uneven queuing delays. Conventional routing protocols are unaware of such MAC specific constraints and as a result, these factors are not considered which result in channel performance degradation. To meet such challenges, the thesis presents FCS and TM schemes for WiMAX. For FCS, Its solution is to improve the mobile WiMAX handover and address the scanning latency. Since minimum scanning time is the most important issue in the handover process. This handover scheme aims to utilize the channel efficiently and apply such a procedure to reduce the time it takes to scan the neighboring access stations. TM uses MAC and physical layer (PHY) specific information in the interface metric and maintains a separate path to destination by applying an alternative interface operation. Simulation tests and comparisons with existing multi-homed protocols and handover schemes demonstrate the effectiveness of incorporating the medium dependent parameters. Moreover, show that suggested schemes, have shown better performance in terms of end-to-end delay and throughput, with efficiency up to 40% in specific test scenarios
Energy Efficient IP-Connectivity with IEEE 802.11 for Home M2M Networks
Machine-to-machine communication (M2M) technology enables large-scale device communication and networking, including home devices and appliances. A critical issue for home M2M networks is how to efficiently integrate existing home consumer devices and appliances into an IP-based wireless M2M network with least modifications. Due to its popularity and widespread use in closed spaces, Wi-Fi is a good alternative as a wireless technology to enable M2M networking for home devices. This paper addresses the energy-efficient integration of home appliances into a Wi-Fi- and IP-based home M2M network. Toward this goal, we first propose an integration architecture that requires least modifications to existing components. Then, we propose a novel long-term sleep scheduling algorithm to be applied with the existing 802.11 power save mode. The proposed scheme utilizes the multicast DNS protocol to maintain device and service availability when devices go into deep sleep mode. We prototyped our proposed architecture and algorithm to build a M2M network testbed of home appliances. We performed various experiments on this testbed to evaluate the operation and energy savings of our proposal. We also did simulation experiments for larger scale scenarios. As a result of our test-bed and simulation experiments, we observed significant energy savings compared to alternatives while also ensuring device and service availability. © The British Computer Society 2017. All rights reserved
Multipath routing and QoS provisioning in mobile ad hoc networks
PhDA Mobile Ad Hoc Networks (MANET) is a collection of mobile nodes that can
communicate with each other using multihop wireless links without utilizing any
fixed based-station infrastructure and centralized management. Each mobile node
in the network acts as both a host generating flows or being destination of flows
and a router forwarding flows directed to other nodes.
Future applications of MANETs are expected to be based on all-IP
architecture and be capable of carrying multitude real-time multimedia
applications such as voice and video as well as data. It is very necessary for
MANETs to have an efficient routing and quality of service (QoS) mechanism to
support diverse applications.
This thesis proposes an on-demand Node-Disjoint Multipath Routing protocol
(NDMR) with low broadcast redundancy. Multipath routing allows the
establishment of multiple paths between a single source and single destination
node. It is also beneficial to avoid traffic congestion and frequent link breaks in
communication because of the mobility of nodes. The important components of
the protocol, such as path accumulation, decreasing routing overhead and
selecting node-disjoint paths, are explained. Because the new protocol
significantly reduces the total number of Route Request packets, this results in an
increased delivery ratio, smaller end-to-end delays for data packets, lower control
overhead and fewer collisions of packets.
Although NDMR provides node-disjoint multipath routing with low route
overhead in MANETs, it is only a best-effort routing approach, which is not
enough to support QoS. DiffServ is a standard approach for a more scalable way
to achieve QoS in any IP network and could potentially be used to provide QoS
in MANETs because it minimises the need for signalling. However, one of the
biggest drawbacks of DiffServ is that the QoS provisioning is separate from the
routing process. This thesis presents a Multipath QoS Routing protocol for
iv
supporting DiffServ (MQRD), which combines the advantages of NDMR and
DiffServ. The protocol can classify network traffic into different priority levels
and apply priority scheduling and queuing management mechanisms to obtain
QoS guarantees
Mobile Ad-Hoc Networks
Ad-hoc networks are a key in the evolution of wireless networks. Ad-hoc networks are typically composed of equal nodes, which communicate over wireless links without any central control. Ad-hoc wireless networks inherit the traditional problems of wireless and mobile communications, such as bandwidth optimisation, power control and transmission quality enhancement. In addition, the multi-hop nature and the lack of fixed infrastructure brings new research problems such as configuration advertising, discovery and maintenance, as well as ad-hoc addressing and self-routing. Many different approaches and protocols have been proposed and there are even multiple standardization efforts within the Internet Engineering Task Force, as well as academic and industrial projects. This chapter focuses on the state of the art in mobile ad-hoc networks. It highlights some of the emerging technologies, protocols, and approaches (at different layers) for realizing network services for users on the move in areas with possibly no pre-existing communications infrastructure
Recommended from our members
Interoperability of wireless communication technologies in hybrid networks: Evaluation of end-to-end interoperability issues and quality of service requirements
This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.Hybrid Networks employing wireless communication technologies have nowadays brought closer the vision of communication “anywhere, any time with anyone”. Such communication technologies consist of various standards, protocols, architectures, characteristics, models, devices, modulation and coding techniques. All these different technologies naturally may share some common characteristics, but there are also many important differences. New advances in these technologies are emerging very rapidly, with the advent of new models, characteristics, protocols and architectures. This rapid evolution imposes many challenges and issues to be addressed, and of particular importance are the interoperability issues of the following wireless technologies: Wireless Fidelity (Wi-Fi) IEEE802.11, Worldwide Interoperability for Microwave Access (WiMAX) IEEE 802.16, Single Channel per Carrier (SCPC), Digital Video Broadcasting of Satellite (DVB-S/DVB-S2), and Digital Video Broadcasting Return Channel through Satellite (DVB-RCS). Due to the differences amongst wireless technologies, these technologies do not generally interoperate easily with each other because of various interoperability and Quality of Service (QoS) issues.
The aim of this study is to assess and investigate end-to-end interoperability issues and QoS requirements, such as bandwidth, delays, jitter, latency, packet loss, throughput, TCP performance, UDP performance, unicast and multicast services and availability, on hybrid wireless communication networks (employing both satellite broadband and terrestrial wireless technologies).
The thesis provides an introduction to wireless communication technologies followed by a review of previous research studies on Hybrid Networks (both satellite and terrestrial wireless technologies, particularly Wi-Fi, WiMAX, DVB-RCS, and SCPC). Previous studies have discussed Wi-Fi, WiMAX, DVB-RCS, SCPC and 3G technologies and their standards as well as their properties and characteristics, such as operating frequency, bandwidth, data rate, basic configuration, coverage, power, interference, social issues, security problems, physical and MAC layer design and development issues. Although some previous studies provide valuable contributions to this area of research, they are limited to link layer characteristics, TCP performance, delay, bandwidth, capacity, data rate, and throughput. None of the studies cover all aspects of end-to-end interoperability issues and QoS requirements; such as bandwidth, delay, jitter, latency, packet loss, link performance, TCP and UDP performance, unicast and multicast performance, at end-to-end level, on Hybrid wireless networks.
Interoperability issues are discussed in detail and a comparison of the different technologies and protocols was done using appropriate testing tools, assessing various performance measures including: bandwidth, delay, jitter, latency, packet loss, throughput and availability testing. The standards, protocol suite/ models and architectures for Wi-Fi, WiMAX, DVB-RCS, SCPC, alongside with different platforms and applications, are discussed and compared. Using a robust approach, which includes a new testing methodology and a generic test plan, the testing was conducted using various realistic test scenarios on real networks, comprising variable numbers and types of nodes. The data, traces, packets, and files were captured from various live scenarios and sites. The test results were analysed in order to measure and compare the characteristics of wireless technologies, devices, protocols and applications.
The motivation of this research is to study all the end-to-end interoperability issues and Quality of Service requirements for rapidly growing Hybrid Networks in a comprehensive and systematic way.
The significance of this research is that it is based on a comprehensive and systematic investigation of issues and facts, instead of hypothetical ideas/scenarios or simulations, which informed the design of a test methodology for empirical data gathering by real network testing, suitable for the measurement of hybrid network single-link or end-to-end issues using proven test tools.
This systematic investigation of the issues encompasses an extensive series of tests measuring delay, jitter, packet loss, bandwidth, throughput, availability, performance of audio and video session, multicast and unicast performance, and stress testing. This testing covers most common test scenarios in hybrid networks and gives recommendations in achieving good end-to-end interoperability and QoS in hybrid networks.
Contributions of study include the identification of gaps in the research, a description of interoperability issues, a comparison of most common test tools, the development of a generic test plan, a new testing process and methodology, analysis and network design recommendations for end-to-end interoperability issues and QoS requirements. This covers the complete cycle of this research.
It is found that UDP is more suitable for hybrid wireless network as compared to TCP, particularly for the demanding applications considered, since TCP presents significant problems for multimedia and live traffic which requires strict QoS requirements on delay, jitter, packet loss and bandwidth. The main bottleneck for satellite communication is the delay of approximately 600 to 680 ms due to the long distance factor (and the finite speed of light) when communicating over geostationary satellites.
The delay and packet loss can be controlled using various methods, such as traffic classification, traffic prioritization, congestion control, buffer management, using delay compensator, protocol compensator, developing automatic request technique, flow scheduling, and bandwidth allocation
Design of interface selection protocols for multi-homed wireless networks
The IEEE 802.11/802.16 standards conformant wireless communication stations have multi-homing transmission capability. To achieve greater communication efficiency, multi-homing capable stations use handover mechanism to select appropriate transmission channel according to variations in the channel quality. This thesis presents three internal-linked handover schemes, (1) Interface Selection Protocol (ISP), belonging to Wireless Local Area Network (WLAN)- Worldwide Interoperability for Microwave Access (WiMAX) environment (2) Fast Channel Scanning (FCS) and (3) Traffic Manager (TM), (2) and (3) belonging to WiMAX Environment. The proposed schemes in this thesis use a novel mechanism of providing a reliable communication route. This solution is based on a cross-layer communication framework, where the interface selection module uses various network related parameters from Medium Access Control (MAC) sub-layer/Physical Layer (PHY) across the protocol suite for decision making at the Network layer. The proposed solutions are highly responsive when compared with existing multi-homed schemes; responsiveness is one of the key factors in the design of such protocols. Selected route under these schemes is based on the most up to date link-layer information. Therefore, such a route is not only reliable in terms of route optimization but it also fulfils the application demands in terms of throughput and delay. Design of ISP protocol use probing frames during the route discovery process. The 802.11 mandates the use of different rates for data transmission frames. The ISP-metric can be incorporated into various routing aspects and its applicability is determined by the possibility of provision of MAC dependent parameters that are used to determine the best path metric values. In many cases, higher device density, interference and mobility cause variable medium access delays. It causes creation of ‘unreachable zones’, where destination is marked as unreachable. However, by use of the best path metric, the destination has been made reachable, anytime and anywhere, because of the intelligent use of the probing frames and interface selection algorithm implemented. The IEEE 802.16e introduces several MAC level queues for different access categories, maintaining service requirement within these queues; which imply that frames from a higher priority queue, i.e. video frames, are serviced more frequently than those belonging to lower priority queues. Such an enhancement at the MAC sub-layer introduces uneven queuing delays. Conventional routing protocols are unaware of such MAC specific constraints and as a result, these factors are not considered which result in channel performance degradation. To meet such challenges, the thesis presents FCS and TM schemes for WiMAX. For FCS, Its solution is to improve the mobile WiMAX handover and address the scanning latency. Since minimum scanning time is the most important issue in the handover process. This handover scheme aims to utilize the channel efficiently and apply such a procedure to reduce the time it takes to scan the neighboring access stations. TM uses MAC and physical layer (PHY) specific information in the interface metric and maintains a separate path to destination by applying an alternative interface operation. Simulation tests and comparisons with existing multi-homed protocols and handover schemes demonstrate the effectiveness of incorporating the medium dependent parameters. Moreover, show that suggested schemes, have shown better performance in terms of end-to-end delay and throughput, with efficiency up to 40% in specific test scenarios.EThOS - Electronic Theses Online ServiceGBUnited Kingdo
Mobile Ad hoc Networking: Imperatives and Challenges
Mobile ad hoc networks (MANETs) represent complex distributed systems that comprise wireless mobile nodes that can freely and dynamically self-organize into arbitrary and temporary, "ad-hoc" network topologies, allowing people and devices to seamlessly internetwork in areas with no pre-existing communication infrastructure, e.g., disaster recovery environments. Ad hoc networking concept is not a new one, having been around in various forms for over 20 years. Traditionally, tactical networks have been the only communication networking application that followed the ad hoc paradigm. Recently, the introduction of new technologies such as the Bluetooth, IEEE 802.11 and Hyperlan are helping enable eventual commercial MANET deployments outside the military domain. These recent evolutions have been generating a renewed and growing interest in the research and development of MANET. This paper attempts to provide a comprehensive overview of this dynamic field. It first explains the important role that mobile ad hoc networks play in the evolution of future wireless technologies. Then, it reviews the latest research activities in these areas, including a summary of MANET\u27s characteristics, capabilities, applications, and design constraints. The paper concludes by presenting a set of challenges and problems requiring further research in the future
Middleware de comunicações para a internet móvel futura
Doutoramento em Informática (MAP-I)A evolução constante em novas tecnologias que providenciam suporte à forma como os nossos dispositivos se ligam, bem como a forma como utilizamos diferentes capacidades e serviços on-line, criou um conjunto sem precedentes de novos desafios que motivam o desenvolvimento de uma recente área de investigação, denominada de Internet Futura. Nesta nova área de investigação, novos aspectos arquiteturais estão ser desenvolvidos, os quais, através da re-estruturação de componentes nucleares subjacentesa que compõem a Internet, progride-a de uma forma capaz de não são fazer face a estes novos desafios, mas também de a preparar para os desafios de amanhã. Aspectos chave pertencendo a este conjunto de desafios são os ambientes de rede heterogéneos compostos por diferentes tipos de redes de acesso, a cada vez maior mudança do tráfego peer-to-peer (P2P) como o tipo de tráfego mais utilizado na Internet, a orquestração de cenários da Internet das Coisas (IoT) que exploram mecanismos de interação Maquinaa-Maquina (M2M), e a utilização de mechanismos centrados na informação
(ICN). Esta tese apresenta uma nova arquitetura capaz de simultaneamente
fazer face a estes desafios, evoluindo os procedimentos de conectividade e
entidades envolvidas, através da adição de uma camada de middleware, que
age como um mecanismo de gestão de controlo avançado. Este mecanismo
de gestão de controlo aproxima as entidades de alto nível (tais como
serviços, aplicações, entidades de gestão de mobilidade, operações de encaminhamento, etc.) com as componentes das camadas de baixo nível
(por exemplo, camadas de ligação, sensores e atuadores), permitindo uma
otimização conjunta dos procedimentos de ligação subjacentes. Os resultados
obtidos não só sublinham a flexibilidade dos mecanismos que compoem
a arquitetura, mas também a sua capacidade de providenciar aumentos de
performance quando comparados com outras soluÇÕes de funcionamento
especÍfico, enquanto permite um maior leque de cenáios e aplicações.The constant evolution in new technologies that support the way our devices
are able to connect, as well the way we use available on-line services and capabilities, has created a set of unprecedented new challenges that motivated
the development of a recent research trend known as the Future Internet.
In this research trend, new architectural aspects are being developed which,
through the restructure of underlying core aspects composing the Internet,
reshapes it in a way capable of not only facing these new challenges,
but also preparing it to tackle tomorrow’s new set of complex issues. Key
aspects belonging to this set of challenges are heterogeneous networking
environments composed by di↵erent kinds of wireless access networks, the
evergrowing change from peer-to-peer (P2P) to video as the most used kind
of traffic in the Internet, the orchestration of Internet of Things (IoT) scenarios exploiting Machine-to-Machine (M2M) interactions, and the usage of
Information-Centric Networking (ICN). This thesis presents a novel framework
able to simultaneous tackle these challenges, empowering connectivity
procedures and entities with a middleware acting as an advanced control
management mechanism. This control management mechanism brings together
both high-level entities (such as application services, mobility management
entities, routing operations, etc.) with the lower layer components
(e.g., link layers, sensor devices, actuators), allowing for a joint optimization of the underlying connectivity and operational procedures. Results highlight not only the flexibility of the mechanisms composing the framework, but also their ability in providing performance increases when compared with other specific purpose solutions, while allowing a wider range of scenarios and deployment possibilities
- …