2,788 research outputs found
Hybrid Satellite-Terrestrial Communication Networks for the Maritime Internet of Things: Key Technologies, Opportunities, and Challenges
With the rapid development of marine activities, there has been an increasing
number of maritime mobile terminals, as well as a growing demand for high-speed
and ultra-reliable maritime communications to keep them connected.
Traditionally, the maritime Internet of Things (IoT) is enabled by maritime
satellites. However, satellites are seriously restricted by their high latency
and relatively low data rate. As an alternative, shore & island-based base
stations (BSs) can be built to extend the coverage of terrestrial networks
using fourth-generation (4G), fifth-generation (5G), and beyond 5G services.
Unmanned aerial vehicles can also be exploited to serve as aerial maritime BSs.
Despite of all these approaches, there are still open issues for an efficient
maritime communication network (MCN). For example, due to the complicated
electromagnetic propagation environment, the limited geometrically available BS
sites, and rigorous service demands from mission-critical applications,
conventional communication and networking theories and methods should be
tailored for maritime scenarios. Towards this end, we provide a survey on the
demand for maritime communications, the state-of-the-art MCNs, and key
technologies for enhancing transmission efficiency, extending network coverage,
and provisioning maritime-specific services. Future challenges in developing an
environment-aware, service-driven, and integrated satellite-air-ground MCN to
be smart enough to utilize external auxiliary information, e.g., sea state and
atmosphere conditions, are also discussed
SAI: safety application identifier algorithm at MAC layer for vehicular safety message dissemination over LTE VANET networks
Vehicular safety applications have much significance in preventing road accidents and fatalities. Among others, cellular networks have been under investigation for the procurement of these applications subject to stringent requirements for latency, transmission parameters, and successful delivery of messages. Earlier contributions have studied utilization of Long-Term Evolution (LTE) under single cell, Friis radio, or simplified higher layer. In this paper, we study the utilization of LTE under multicell and multipath fading environment and introduce the use of adaptive awareness range. Then, we propose an algorithm that uses the concept of quality of service (QoS) class identifiers (QCIs) along with dynamic adaptive awareness range. Furthermore, we investigate the impact of background traffic on the proposed algorithm. Finally, we utilize medium access control (MAC) layer elements in order to fulfill vehicular application requirements through extensive system-level simulations. The results show that, by using an awareness range of up to 250 m, the LTE system is capable of fulfilling the safety application requirements for up to 10 beacons/s with 150 vehicles in an area of 2 × 2 km2. The urban vehicular radio environment has a significant impact and decreases the probability for end-to-end delay to be ≤100 ms from 93%–97% to 76%–78% compared to the Friis radio environment. The proposed algorithm reduces the amount of vehicular application traffic from 21 Mbps to 13 Mbps, while improving the probability of end-to-end delay being ≤100 ms by 20%. Lastly, use of MAC layer control elements brings the processing of messages towards the edge of network increasing capacity of the system by about 50%
Business Case and Technology Analysis for 5G Low Latency Applications
A large number of new consumer and industrial applications are likely to
change the classic operator's business models and provide a wide range of new
markets to enter. This article analyses the most relevant 5G use cases that
require ultra-low latency, from both technical and business perspectives. Low
latency services pose challenging requirements to the network, and to fulfill
them operators need to invest in costly changes in their network. In this
sense, it is not clear whether such investments are going to be amortized with
these new business models. In light of this, specific applications and
requirements are described and the potential market benefits for operators are
analysed. Conclusions show that operators have clear opportunities to add value
and position themselves strongly with the increasing number of services to be
provided by 5G.Comment: 18 pages, 5 figure
Can network coding bridge the digital divide in the Pacific?
Conventional TCP performance is significantly impaired under long latency
and/or constrained bandwidth. While small Pacific Island states on satellite
links experience this in the extreme, small populations and remoteness often
rule out submarine fibre connections and their communities struggle to reap the
benefits of the Internet. Network-coded TCP (TCP/NC) can increase goodput under
high latency and packet loss, but has not been used to tunnel conventional TCP
and UDP across satellite links before. We report on a feasibility study aimed
at determining expected goodput gain across such TCP/NC tunnels into island
targets on geostationary and medium earth orbit satellite links.Comment: 5 pages, 3 figures, conference (Netcod2015
Communication and Control in Collaborative UAVs: Recent Advances and Future Trends
The recent progress in unmanned aerial vehicles (UAV) technology has
significantly advanced UAV-based applications for military, civil, and
commercial domains. Nevertheless, the challenges of establishing high-speed
communication links, flexible control strategies, and developing efficient
collaborative decision-making algorithms for a swarm of UAVs limit their
autonomy, robustness, and reliability. Thus, a growing focus has been witnessed
on collaborative communication to allow a swarm of UAVs to coordinate and
communicate autonomously for the cooperative completion of tasks in a short
time with improved efficiency and reliability. This work presents a
comprehensive review of collaborative communication in a multi-UAV system. We
thoroughly discuss the characteristics of intelligent UAVs and their
communication and control requirements for autonomous collaboration and
coordination. Moreover, we review various UAV collaboration tasks, summarize
the applications of UAV swarm networks for dense urban environments and present
the use case scenarios to highlight the current developments of UAV-based
applications in various domains. Finally, we identify several exciting future
research direction that needs attention for advancing the research in
collaborative UAVs
- …