Bidirectional Electric Vehicles Service Integration in Smart Power Grid with Renewable Energy Resources

As electric vehicles (EVs) become more popular, the utility companies are forced to increase power generations in the grid. However, these EVs are capable of providing power to the grid to deliver different grid ancillary services in a concept known as vehicle-to-grid (V2G) and grid-to-vehicle (G2V), in which the EV can serve as a load or source at the same time. These services can provide more benefits when they are integrated with Photovoltaic (PV) generation. The proper modeling, design and control for the power conversion systems that provide the optimum integration among the EVs, PV generations and grid are investigated in this thesis. The coupling between the PV generation and integration bus is accomplished through a unidirectional converter. Precise dynamic and small-signal models for the grid-connected PV power system are developed and utilized to predict the system’s performance during the different operating conditions. An advanced intelligent maximum power point tracker based on fuzzy logic control is developed and designed using a mix between the analytical model and genetic algorithm optimization. The EV is connected to the integration bus through a bidirectional inductive wireless power transfer system (BIWPTS), which allows the EV to be charged and discharged wirelessly during the long-term parking, transient stops and movement. Accurate analytical and physics-based models for the BIWPTS are developed and utilized to forecast its performance, and novel practical limitations for the active and reactive power-flow during G2V and V2G operations are stated. A comparative and assessment analysis for the different compensation topologies in the symmetrical BIWPTS was performed based on analytical, simulation and experimental data. Also, a magnetic design optimization for the double-D power pad based on finite-element analysis is achieved. The nonlinearities in the BIWPTS due to the magnetic material and the high-frequency components are investigated rely on a physics-based co-simulation platform. Also, a novel two-layer predictive power-flow controller that manages the bidirectional power-flow between the EV and grid is developed, implemented and tested. In addition, the feasibility of deploying the quasi-dynamic wireless power transfer technology on the road to charge the EV during the transient stops at the traffic signals is proven

New trends in electrical vehicle powertrains

The electric vehicle and plug-in hybrid electric vehicle play a fundamental role in the forthcoming new paradigms of mobility and energy models. The electrification of the transport sector would lead to advantages in terms of energy efficiency and reduction of greenhouse gas emissions, but would also be a great opportunity for the introduction of renewable sources in the electricity sector. The chapters in this book show a diversity of current and new developments in the electrification of the transport sector seen from the electric vehicle point of view: first, the related technologies with design, control and supervision, second, the powertrain electric motor efficiency and reliability and, third, the deployment issues regarding renewable sources integration and charging facilities. This is precisely the purpose of this book, that is, to contribute to the literature about current research and development activities related to new trends in electric vehicle power trains.Peer ReviewedPostprint (author's final draft

Power quality improvement utilizing photovoltaic generation connected to a weak grid

Microgrid research and development in the past decades have been one of the most popular topics. Similarly, the photovoltaic generation has been surging among renewable generation in the past few years, thanks to the availability, affordability, technology maturity of the PV panels and the PV inverter in the general market. Unfortunately, quite often, the PV installations are connected to weak grids and may have been considered as the culprit of poor power quality affecting other loads in particular sensitive loads connected to the same point of common coupling (PCC). This paper is intended to demystify the renewable generation, and turns the negative perception into positive revelation of the superiority of PV generation to the power quality improvement in a microgrid system. The main objective of this work is to develop a control method for the PV inverter so that the power quality at the PCC will be improved under various disturbances. The method is to control the reactive current based on utilizing the grid current to counteract the negative impact of the disturbances. The proposed control method is verified in PSIM platform. Promising results have been obtaine

Efficiency and Sustainability of the Distributed Renewable Hybrid Power Systems Based on the Energy Internet, Blockchain Technology and Smart Contracts

The climate changes that are visible today are a challenge for the global research community. In this context, renewable energy sources, fuel cell systems, and other energy generating sources must be optimally combined and connected to the grid system using advanced energy transaction methods. As this book presents the latest solutions in the implementation of fuel cell and renewable energy in mobile and stationary applications such as hybrid and microgrid power systems based on energy internet, blockchain technology, and smart contracts, we hope that they are of interest to readers working in the related fields mentioned above

On the performance evaluation of lithium-ion battery systems for dynamic load functions in warship hybrid power and propulsion systems

Battery technology has developed to a juncture where high power and high energy density characteristics can be exploited for a common use battery energy storage system (ESS) for warship power systems to improve system steady state and dynamic performance. A critical review of previous research has exposed a lack of knowledge in performance assessment of battery ESS to operate as power reserve, to load level generator sets and supply laser directed energy weapons (LDEW) in a warship hybrid power and propulsion system. This research explores the performance impact of using a battery ESS in a candidate hybrid power and propulsion system. A simulation model of a lithium-ion nickel manganese cobalt based ESS was developed and validated against high rates of charge and discharge. Three system models were developed to explore the steady state, quasi-steady state and dynamic performance of the candidate power system when the battery is integrated. Three key investigations were conducted using the respective system models. The first explored the effects of ESS on the candidate power system performance when the ESS is operated as power reserve. Analysis showed that a 40% reduction in exhaust greenhouse gas (GHG) emissions was potentially achievable from the candidate warship compared to conventional operating practice. The second explored power system performance when operating the ESS operates to load level a diesel generator under quasi-steady state conditions. A 2% droop limit is suggested to mitigate against adverse quality of power supply (QPS) conditions for electrical consumers. The third investigation, and key contribution to the field of naval power systems, explored the impact of LDEW demands on the transient response of the ESS and system quality of power supply. The research findings show that the battery ESS is capable of high rates of fire for extended periods subject to state of charge operating limitations. To mitigate against adverse QPS conditions and provide operators with a realistic operating envelope to power the laser with the battery ESS, it is recommended that the power limit of the laser load should be 1.75 MW peak power

Renewable Energy

Renewable Energy is energy generated from natural resources - such as sunlight, wind, rain, tides and geothermal heat - which are naturally replenished. In 2008, about 18% of global final energy consumption came from renewables, with 13% coming from traditional biomass, such as wood burning. Hydroelectricity was the next largest renewable source, providing 3% (15% of global electricity generation), followed by solar hot water/heating, which contributed with 1.3%. Modern technologies, such as geothermal energy, wind power, solar power, and ocean energy together provided some 0.8% of final energy consumption. The book provides a forum for dissemination and exchange of up - to - date scientific information on theoretical, generic and applied areas of knowledge. The topics deal with new devices and circuits for energy systems, photovoltaic and solar thermal, wind energy systems, tidal and wave energy, fuel cell systems, bio energy and geo-energy, sustainable energy resources and systems, energy storage systems, energy market management and economics, off-grid isolated energy systems, energy in transportation systems, energy resources for portable electronics, intelligent energy power transmission, distribution and inter - connectors, energy efficient utilization, environmental issues, energy harvesting, nanotechnology in energy, policy issues on renewable energy, building design, power electronics in energy conversion, new materials for energy resources, and RF and magnetic field energy devices

Power and Energy Student Summit 2019: 9 – 11 July 2019 Otto von Guericke University Magdeburg ; Conference Program

The book includes a short description of the conference program of the "Power and Energy Student Summit 2019". The conference, which is orgaized for students in the area of electric power systems, covers topics such as renewable energy, high voltage technology, grid control and network planning, power quality, HVDC and FACTS as well as protection technology. Besides the overview of the conference venue, activites and the time schedule, the book includes all papers presented at the conference

Loss allocation in a distribution system with distributed generation units

In Denmark, a large part of the electricity is produced by wind turbines and combined heat and power plants (CHPs). Most of them are connected to the network through distribution systems. This paper presents a new algorithm for allocation of the losses in a distribution system with distributed generation. The algorithm is based on a reduced impedance matrix of the network and current injections from loads and production units. With the algorithm, the effect of the covariance between production and consumption can be evaluated. To verify the theoretical results, a model of the distribution system in Brønderslev in Northern Jutland, including measurement data, has been studied