71 research outputs found
Interference Alignment for Cognitive Radio Communications and Networks: A Survey
© 2019 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).Interference alignment (IA) is an innovative wireless transmission strategy that has shown to be a promising technique for achieving optimal capacity scaling of a multiuser interference channel at asymptotically high-signal-to-noise ratio (SNR). Transmitters exploit the availability of multiple signaling dimensions in order to align their mutual interference at the receivers. Most of the research has focused on developing algorithms for determining alignment solutions as well as proving interference alignment’s theoretical ability to achieve the maximum degrees of freedom in a wireless network. Cognitive radio, on the other hand, is a technique used to improve the utilization of the radio spectrum by opportunistically sensing and accessing unused licensed frequency spectrum, without causing harmful interference to the licensed users. With the increased deployment of wireless services, the possibility of detecting unused frequency spectrum becomes diminished. Thus, the concept of introducing interference alignment in cognitive radio has become a very attractive proposition. This paper provides a survey of the implementation of IA in cognitive radio under the main research paradigms, along with a summary and analysis of results under each system model.Peer reviewe
MIMO Multiway Relaying with Pairwise Data Exchange: A Degrees of Freedom Perspective
In this paper, we study achievable degrees of freedom (DoF) of a
multiple-input multiple-output (MIMO) multiway relay channel (mRC) where
users, each equipped with antennas, exchange messages in a pairwise manner
via a common -antenna relay node. % A novel and systematic way of joint
beamforming design at the users and at the relay is proposed to align signals
for efficient implementation of physical-layer network coding (PNC). It is
shown that, when the user number , the proposed beamforming design can
achieve the DoF capacity of the considered mRC for any setups. % For
the scenarios with , we show that the proposed signaling scheme can be
improved by disabling a portion of relay antennas so as to align signals more
efficiently. Our analysis reveals that the obtained achievable DoF is always
piecewise linear, and is bounded either by the number of user antennas or
by the number of relay antennas . Further, we show that the DoF capacity can
be achieved for and
, which
provides a broader range of the DoF capacity than the existing results.
Asymptotic DoF as is also derived based on the proposed
signaling scheme.Comment: 13 pages, 7 figure
Wireless transmission protocols using relays for broadcast and information exchange channels
Relays have been used to overcome existing network performance bottlenecks in meeting the growing
demand for large bandwidth and high quality of service (QoS) in wireless networks. This thesis
proposes several wireless transmission protocols using relays in practical multi-user broadcast and
information exchange channels. The main theme is to demonstrate that efficient use of relays provides
an additional dimension to improve reliability, throughput, power efficiency and secrecy. First,
a spectrally efficient cooperative transmission protocol is proposed for the multiple-input and singleoutput
(MISO) broadcast channel to improve the reliability of wireless transmission. The proposed
protocol mitigates co-channel interference and provides another dimension to improve the diversity
gain. Analytical and simulation results show that outage probability and the diversity and multiplexing
tradeoff of the proposed cooperative protocol outperforms the non-cooperative scheme. Second,
a two-way relaying protocol is proposed for the multi-pair, two-way relaying channel to improve the
throughput and reliability. The proposed protocol enables both the users and the relay to participate
in interference cancellation. Several beamforming schemes are proposed for the multi-antenna
relay. Analytical and simulation results reveal that the proposed protocol delivers significant improvements
in ergodic capacity, outage probability and the diversity and multiplexing tradeoff if compared
to existing schemes. Third, a joint beamforming and power management scheme is proposed for
multiple-input and multiple-output (MIMO) two-way relaying channel to improve the sum-rate. Network
power allocation and power control optimisation problems are formulated and solved using
convex optimisation techniques. Simulation results verify that the proposed scheme delivers better
sum-rate or consumes lower power when compared to existing schemes. Fourth, two-way secrecy
schemes which combine one-time pad and wiretap coding are proposed for the scalar broadcast channel
to improve secrecy rate. The proposed schemes utilise the channel reciprocity and employ relays
to forward secret messages. Analytical and simulation results reveal that the proposed schemes are
able to achieve positive secrecy rates even when the number of users is large. All of these new wireless
transmission protocols help to realise better throughput, reliability, power efficiency and secrecy
for wireless broadcast and information exchange channels through the efficient use of relays
Wireless MIMO Switching: Weighted Sum Mean Square Error and Sum Rate Optimization
This paper addresses joint transceiver and relay design for a wireless
multiple-input-multiple-output (MIMO) switching scheme that enables data
exchange among multiple users. Here, a multi-antenna relay linearly precodes
the received (uplink) signals from multiple users before forwarding the signal
in the downlink, where the purpose of precoding is to let each user receive its
desired signal with interference from other users suppressed. The problem of
optimizing the precoder based on various design criteria is typically
non-convex and difficult to solve. The main contribution of this paper is a
unified approach to solve the weighted sum mean square error (MSE) minimization
and weighted sum rate maximization problems in MIMO switching. Specifically, an
iterative algorithm is proposed for jointly optimizing the relay's precoder and
the users' receive filters to minimize the weighted sum MSE. It is also shown
that the weighted sum rate maximization problem can be reformulated as an
iterated weighted sum MSE minimization problem and can therefore be solved
similarly to the case of weighted sum MSE minimization. With properly chosen
initial values, the proposed iterative algorithms are asymptotically optimal in
both high and low signal-to-noise ratio (SNR) regimes for MIMO switching,
either with or without self-interference cancellation (a.k.a., physical-layer
network coding). Numerical results show that the optimized MIMO switching
scheme based on the proposed algorithms significantly outperforms existing
approaches in the literature.Comment: This manuscript is under 2nd review of IEEE Transactions on
Information Theor
- …