Low-complexity Noncoherent Iterative CPM Demodulator for FH Communication

In this paper, we investigate the noncoherent iterative demodulation of coded continuous phase modulation (CPM) in frequency hopped (FH) systems. In this field, one important problem is that the complexity of the optimal demodulator is prohibitive unless the number of symbols per hop duration is very small. To solve this problem, we propose a novel demodulator, which reduces the complexity by applying phase quantization and exploiting the phase rotational invariance property of CPM signals. As shown by computational complexity analysis and numerical results, the proposed demodulator approaches the performance of the optimal demodulator, and provides considerable performance improvement over the existing solutions with the same computational complexity

Serially Concatenated Coded Continuous Phase Modulation for Aeronautical Telemetry

This thesis treats the development of bandwidth-efficient serially concatenated coded (SCC) continuous phase modulation (CPM) techniques for aeronautical telemetry. The concatenated code consists of an inner and an outer code, separated by an interleaver in most configurations, and is decoded using relatively simple near-optimum iterative decoding algorithms. CPM waveforms such as shaped-offset quadrature phase shift keying (SOQPSK) and pulse code modulation/frequency modulation (PCM/FM), which are currently used in military satellite and aeronautical telemetry standards, can be viewed as inner codes due to their recursive nature. For the outer codes, this thesis applies serially concatenated convolutional codes (SCCC), turbo-product codes (TPC) and repeat-accumulate codes (RAC) because of their large coding gains, high code rates, and because their decoding algorithms are readily implemented. High-rate codes are of special interest in aeronautical telemetry applications due to recent reductions in available spectrum and ever-increasing demands on data rates. This thesis evaluates the proposed coding schemes with a large set of numerical simulation results and makes a number of recommendations based on these results

Capacity-achieving CPM schemes

The pragmatic approach to coded continuous-phase modulation (CPM) is proposed as a capacity-achieving low-complexity alternative to the serially-concatenated CPM (SC-CPM) coding scheme. In this paper, we first perform a selection of the best spectrally-efficient CPM modulations to be embedded into SC-CPM schemes. Then, we consider the pragmatic capacity (a.k.a. BICM capacity) of CPM modulations and optimize it through a careful design of the mapping between input bits and CPM waveforms. The so obtained schemes are cascaded with an outer serially-concatenated convolutional code to form a pragmatic coded-modulation system. The resulting schemes exhibit performance very close to the CPM capacity without requiring iterations between the outer decoder and the CPM demodulator. As a result, the receiver exhibits reduced complexity and increased flexibility due to the separation of the demodulation and decoding functions.Comment: Submitted to IEEE Transactions on Information Theor

Serially Concatenated Continuous Phase Modulation with SOVA Turbo Decoding

For a Serially Concatenated Continuous Phase Modulation (SCCPM) system that concatenates a rate of 1/2 Convolutional Code (CC) and an M-ary full response continuous phase modulation (CPM) signal, we design a turbo decoding scheme using the Soft Output Viterbi algorithm (SOVA) and study the system performance. A decomposition model is used in CPM to reduce the number of states and separate the continuous phase encoder (CPE) with the modulator. As a soft-input soft-output (SISO) decoding algorithm, SOVA is used to generate and update the soft information of decoded signal symbols during the iterative process for both the CPM signal and the CC. Newly generated soft information from one component decoder will be used by the other component decoder to constitute an iterative, i.e., turbo, decoding process. Simulation results show that a decoding gain of at least 1 dB can be obtained by using turbo decoding compared to that without turbo decoding

Asymptotic Analysis and Design of LDPC Codes for Laurent-based Optimal and Suboptimal CPM Receivers

International audienceIn this paper, we derive an asymptotic analysis for a capacity approaching design of serially concatenated turbo schemes with low density parity check (LDPC) codes and continuous phase modulation (CPM) based on Laurent decomposition. The proposed design is based on extrinsic mutual information evolution and Gaussian approximation. By inserting partial interleavers between LDPC and CPM and allowing degree-1 variable nodes under a certain constraint we show that designed rates are very close to the maximum achievable rates. Furthermore, we discuss the selection of low complexity receivers that works with the same optimized profiles

Advanced Coding And Modulation For Ultra-wideband And Impulsive Noises

The ever-growing demand for higher quality and faster multimedia content delivery over short distances in home environments drives the quest for higher data rates in wireless personal area networks (WPANs). One of the candidate IEEE 802.15.3a WPAN proposals support data rates up to 480 Mbps by using punctured convolutional codes with quadrature phase shift keying (QPSK) modulation for a multi-band orthogonal frequency-division multiplexing (MB-OFDM) system over ultra wideband (UWB) channels. In the first part of this dissertation, we combine more powerful near-Shannon-limit turbo codes with bandwidth efficient trellis coded modulation, i.e., turbo trellis coded modulation (TTCM), to further improve the data rates up to 1.2 Gbps. A modified iterative decoder for this TTCM coded MB-OFDM system is proposed and its bit error rate performance under various impulsive noises over both Gaussian and UWB channel is extensively investigated, especially in mismatched scenarios. A robust decoder which is immune to noise mismatch is provided based on comparison of impulsive noises in time domain and frequency domain. The accurate estimation of the dynamic noise model could be very difficult or impossible at the receiver, thus a significant performance degradation may occur due to noise mismatch. In the second part of this dissertation, we prove that the minimax decoder in \cite, which instead of minimizing the average bit error probability aims at minimizing the worst bit error probability, is optimal and robust to certain noise model with unknown prior probabilities in two and higher dimensions. Besides turbo codes, another kind of error correcting codes which approach the Shannon capacity is low-density parity-check (LDPC) codes. In the last part of this dissertation, we extend the density evolution method for sum-product decoding using mismatched noises. We will prove that as long as the true noise type and the estimated noise type used in the decoder are both binary-input memoryless output symmetric channels, the output from mismatched log-likelihood ratio (LLR) computation is also symmetric. We will show the Shannon capacity can be evaluated for mismatched LLR computation and it can be reduced if the mismatched LLR computation is not an one-to-one mapping function. We will derive the Shannon capacity, threshold and stable condition of LDPC codes for mismatched BIAWGN and BIL noise types. The results show that the noise variance estimation errors will not affect the Shannon capacity and stable condition, but the errors do reduce the threshold. The mismatch in noise type will only reduce Shannon capacity when LLR computation is based on BIL

Space-Time Codes Concatenated with Turbo Codes over Fading Channels

The uses of space-time code (STC) and iterative processing have enabled robust communications over fading channels at previously unachievable signal-to-noise ratios. Maintaining desired transmission rate while improving the diversity from STC is challenging, and the performance of the STC suffers considerably due to lack of channel state information (CSI). This dissertation research addresses issues of considerable importance in the design of STC with emphasis on efficient concatenation of channel coding and STC with theoretical bound derivation of the proposed schemes, iterative space-time trellis coding (STTC), and differential space-time codes. First, we concatenate space-time block code (STBC) with turbo code for improving diversity gain as well as coding gain. Proper soft-information sharing is indispensable to the iterative decoding process. We derive the required soft outputs from STBC decoders for passing to outer turbo code. Traditionally, the performance of STBC schemes has been evaluated under perfect channel estimation. For fast time-varying channel, obtaining the CSI is tedious if not impossible. We introduce a scheme of calculating the CSI at the receiver from the received signal without the explicit channel estimation. The encoder of STTC, which is generally decoded using Viterbi like algorithm, is based on a trellis structure. This trellis structure provides an inherent advantage for the STTC scheme that an iterative decoding is feasible with the minimal addition computational complexity. An iteratively decoded space-time trellis coding (ISTTC) is proposed in this dissertation, where the STTC schemes are used as constituent codes of turbo code. Then, the performance upper bound of the proposed ISTTC is derived. Finally, for implementing STBC without channel estimation and maintaining trans- mission rate, we concatenate differential space-time block codes (DSTBC) with ISTTC. The serial concatenation of DSTBC or STBC with ISTTC offers improving performance, even without an outer channel code. These schemes reduce the system complexity com- pared to the standalone ISTTC and increase the transmission rate under the same SNR condition. Detailed design procedures of these proposed schemes are analyzed

Self-concatenated code design and its application in power-efficient cooperative communications

In this tutorial, we have focused on the design of binary self-concatenated coding schemes with the help of EXtrinsic Information Transfer (EXIT) charts and Union bound analysis. The design methodology of future iteratively decoded self-concatenated aided cooperative communication schemes is presented. In doing so, we will identify the most important milestones in the area of channel coding, concatenated coding schemes and cooperative communication systems till date and suggest future research directions