Implementation of a Combined OFDM-Demodulation and WCDMA-Equalization Module

For a dual-mode baseband receiver for the OFDMWireless LAN andWCDMA standards, integration of the demodulation and equalization tasks on a dedicated hardware module has been investigated. For OFDM demodulation, an FFT algorithm based on cascaded twiddle factor decomposition has been selected. This type of algorithm combines high spatial and temporal regularity in the FFT data-flow graphs with a minimal number of computations. A frequency-domain algorithm based on a circulant channel approximation has been selected for WCDMA equalization. It has good performance, low hardware complexity and a low number of computations. Its main advantage is the reuse of the FFT kernel, which contributes to the integration of both tasks. The demodulation and equalization module has been described at the register transfer level with the in-house developed Arx language. The core of the module is a pipelined radix-23 butterfly combined with a complex multiplier and complex divider. The module has an area of 0.447 mm2 in 0.18 ¿m technology and a power consumption of 10.6 mW. The proposed module compares favorably with solutions reported in literature

Cross-Layer Optimization for Power-Efficient and Robust Digital Circuits and Systems

With the increasing digital services demand, performance and power-efficiency become vital requirements for digital circuits and systems. However, the enabling CMOS technology scaling has been facing significant challenges of device uncertainties, such as process, voltage, and temperature variations. To ensure system reliability, worst-case corner assumptions are usually made in each design level. However, the over-pessimistic worst-case margin leads to unnecessary power waste and performance loss as high as 2.2x. Since optimizations are traditionally confined to each specific level, those safe margins can hardly be properly exploited. To tackle the challenge, it is therefore advised in this Ph.D. thesis to perform a cross-layer optimization for digital signal processing circuits and systems, to achieve a global balance of power consumption and output quality. To conclude, the traditional over-pessimistic worst-case approach leads to huge power waste. In contrast, the adaptive voltage scaling approach saves power (25% for the CORDIC application) by providing a just-needed supply voltage. The power saving is maximized (46% for CORDIC) when a more aggressive voltage over-scaling scheme is applied. These sparsely occurred circuit errors produced by aggressive voltage over-scaling are mitigated by higher level error resilient designs. For functions like FFT and CORDIC, smart error mitigation schemes were proposed to enhance reliability (soft-errors and timing-errors, respectively). Applications like Massive MIMO systems are robust against lower level errors, thanks to the intrinsically redundant antennas. This property makes it applicable to embrace digital hardware that trades quality for power savings.Comment: 190 page

Design and analysis of optimized CORDIC based GMSK system on FPGA platform

The Gaussian minimum shift keying (GMSK) is one of the best suited digital modulation schemes in the global system for mobile communication (GSM) because of its constant envelop and spectral efficiency characteristics. Most of the conventional GMSK approaches failed to balance the digital modulation with efficient usage of spectrum. In this article, the hardware architecture of the optimized CORDIC-based GMSK system is designed, which includes GMSK Modulation with the channel and GMSK Demodulation. The modulation consists of non-return zero (NRZ) encoder, an integrator followed by Gaussian filtering and frequency modulation (FM). The GMSK demodulation consists of FM demodulator, followed by differentiation and NRZ decoder. The FM Modulation and demodulation use the optimized CORDIC model for an In-phase (I) and quadrature (Q) phase generation. The optimized CORDIC is designed by using quadrant mapping and pipelined structure to improve the hardware and computational complexity in GMSK systems. The GMSK system is designed on the Xilinx platform and implemented on Artix-7 and Spartan-3EFPGA. The hardware constraints like area, power, and timing utilization are summarized. The comparison of the optimized CORDIC model with similar CORDIC approaches is tabulated with improvements