Leveraging Spatial Diversity to Mitigate Partial Band Interference in Undersea Networks through Waveform Reconstruction

Many acoustic channels suffer from interference which is neither narrowband nor impulsive. This relatively long duration partial band interference can be particularly detrimental to system performance. We survey recent work in interference mitigation as background motivation to develop a spatial diversity receiver for use in underwater networks. The network consists of multiple distributed cabled hydrophones that receive data transmitted over a time-varying multipath channel in the presence of partial band interference produced by interfering active sonar signals as well as marine mammal vocalizations. In operational networks, many “dropped” messages are lost due to partial band interference which corrupts different portions of the received signal depending on the relative position of the interferers, information source and receivers due to the slow speed of propagation. Our algorithm has been tested on simulated data and is shown to work on an example from a recent undersea experiment

Applying Spatial Diversity to Mitigate Partial Band Interference in Undersea Networks

Many acoustic channels suffer from interference which is neither narrowband nor impulsive. This relatively long duration partial band interference can be particularly detrimental to system performance. We survey recent work in interference mitigation and orthogonal frequency division multiplexing (OFDM) as background motivation to develop a spatial diversity receiver for use in underwater networks. The network consists of multiple distributed cabled hydrophones that receive data transmitted over a time-varying multipath channel in the presence of partial band interference produced by interfering active sonar signals as well as marine mammal vocalizations. In operational networks, many “dropped” messages are lost due to partial band interference which corrupts different portions of the received signal depending on the relative position of the interferers, information source and receivers due to the slow speed of propagation

On Time-Variant Distortions in Multicarrier Transmission with Application to Frequency Offsets and Phase Noise

Phase noise and frequency offsets are due to their time-variant behavior one of the most limiting disturbances in practical OFDM designs and therefore intensively studied by many authors. In this paper we present a generalized framework for the prediction of uncoded system performance in the presence of time-variant distortions including the transmitter and receiver pulse shapes as well as the channel. Therefore, unlike existing studies, our approach can be employed for more general multicarrier schemes. To show the usefulness of our approach, we apply the results to OFDM in the context of frequency offset and Wiener phase noise, yielding improved bounds on the uncoded performance. In particular, we obtain exact formulas for the averaged performance in AWGN and time-invariant multipath channels.Comment: 10 pages (twocolumn), 5 figure

A Comparison of a Single Receiver and a Multi-Receiver Techniques to Mitigate Partial Band Interference

Many acoustic channels suffer from interference which is neither narrowband nor impulsive. This relatively long duration partial band interference can be particularly detrimental to system performance. We survey recent work in interference mitigation as background motivation to develop a spatial diversity receiver for use in underwater networks and compare this novel multi-receiver interference mitigation strategy with a recently developed single receiver interference mitigation algorithm using experimental data collected from the underwater acoustic network at the Atlantic Underwater Test and Evaluation Center. The network consists of multiple distributed cabled hydrophones that receive data transmitted over a time-varying multipath channel in the presence of partial band interference produced by interfering active sonar signals. In operational networks, many dropped messages are lost due to partial band interference which corrupts different portions of the received signal depending on the relative position of the interferers, information source and receivers due to the slow speed of propagation

MULTICARRIER TRANSMISSION TECHNIQUES

In this thesis, multicarrier transmission techniques envisioned for the fifth-generation wireless networks are studied. First, three basic techniques, namely orthogonal frequency-division multiplexing (OFDM), filter-bank multicarrier offset quadrature amplitude modulation (FBMC-OQAM), and generalized frequency-division multiplexing (GFDM) are reviewed in detail. In particular, the block-based structure and cyclic prefixing of OFDM are discussed and its bit error rate (BER) performance is analyzed. Then it is demonstrated that with offset QAM the orthogonality between subcarriers in FBMC-OQAM is preserved. Next, the roles of tail biting technique and circular convolution in GFDM are explained. An efficient implementation of GFDM is also described. Second, circular filterbank multicarrier offset QAM (CFBMC-OQAM), a technique which combines the block-based structure of GFDM and offset QAM of FBMC-OQAM, is presented. Then a precoded scheme is proposed, in which the Walsh-Hadamard (WH) transform is applied to CFBMC-OQAM system, resulting in a precoded scheme called WH-CFBMC-OQAM. The proposed system has a block-based structure and can be implemented efficiently using fast Fourier transform (FTT) and inverse FFT (IFFT). In addition, a cyclic prefix can be inserted to facilitate simple equalization at the receiver. WH-CFBMC-OQAM exploits the frequency diversity by averaging the signal-to-noise ratios (SNRs) over all subcarriers. A theoretical approximation for the bit error rate performance of WH-CFBMC-OQAM over a frequency-selective channel is derived. Under the same system configuration, simulation results demonstrate the excellent performance of the proposed scheme when compared to the performance of other techniques. Simulation also verifies that the theoretical results match perfectly with simulation results for any SNR value

Consistent Reconstruction of the Input of an Oversampled Filter Bank From Noisy Subbands

This paper introduces a reconstruction approach for the input signal of an oversampled filter bank (OFB) when the sub-bands generated at its output are quantized and transmitted over a noisy channel. This approach exploits the redundancy introduced by the OFB and the fact that the quantization noise is bounded. A maximum-likelihood estimate of the input signal is evaluated, which only considers the vectors of quantization indexes corresponding to subband signals that could have been generated by the OFB and that are compliant with the quantization errors. When considering an OFB with an oversampling ratio of 3/2 and a transmission of quantized subbands on an AWGN channel, compared to a classical decoder, the performance gains are up to 9 dB in terms of SNR for the reconstructed signal, and 3 dB in terms of channel SNR.Comment: European Signal Processing Conference (2011

Channel estimation techniques for filter bank multicarrier based transceivers for next generation of wireless networks

A dissertation submitted to Faculty of Engineering and the Built Environment, University of the Witwatersrand, Johannesburg, in fulfillment of the requirements for the degree of Master of Science in Engineering (Electrical and Information Engineering), August 2017The fourth generation (4G) of wireless communication system is designed based on the principles of cyclic prefix orthogonal frequency division multiplexing (CP-OFDM) where the cyclic prefix (CP) is used to combat inter-symbol interference (ISI) and inter-carrier interference (ICI) in order to achieve higher data rates in comparison to the previous generations of wireless networks. Various filter bank multicarrier systems have been considered as potential waveforms for the fast emerging next generation (xG) of wireless networks (especially the fifth generation (5G) networks). Some examples of the considered waveforms are orthogonal frequency division multiplexing with offset quadrature amplitude modulation based filter bank, universal filtered multicarrier (UFMC), bi-orthogonal frequency division multiplexing (BFDM) and generalized frequency division multiplexing (GFDM). In perfect reconstruction (PR) or near perfect reconstruction (NPR) filter bank designs, these aforementioned FBMC waveforms adopt the use of well-designed prototype filters (which are used for designing the synthesis and analysis filter banks) so as to either replace or minimize the CP usage of the 4G networks in order to provide higher spectral efficiencies for the overall increment in data rates. The accurate designing of the FIR low-pass prototype filter in NPR filter banks results in minimal signal distortions thus, making the analysis filter bank a time-reversed version of the corresponding synthesis filter bank. However, in non-perfect reconstruction (Non-PR) the analysis filter bank is not directly a time-reversed version of the corresponding synthesis filter bank as the prototype filter impulse response for this system is formulated (in this dissertation) by the introduction of randomly generated errors. Hence, aliasing and amplitude distortions are more prominent for Non-PR. Channel estimation (CE) is used to predict the behaviour of the frequency selective channel and is usually adopted to ensure excellent reconstruction of the transmitted symbols. These techniques can be broadly classified as pilot based, semi-blind and blind channel estimation schemes. In this dissertation, two linear pilot based CE techniques namely the least square (LS) and linear minimum mean square error (LMMSE), and three adaptive channel estimation schemes namely least mean square (LMS), normalized least mean square (NLMS) and recursive least square (RLS) are presented, analyzed and documented. These are implemented while exploiting the near orthogonality properties of offset quadrature amplitude modulation (OQAM) to mitigate the effects of interference for two filter bank waveforms (i.e. OFDM/OQAM and GFDM/OQAM) for the next generation of wireless networks assuming conditions of both NPR and Non-PR in slow and fast frequency selective Rayleigh fading channel. Results obtained from the computer simulations carried out showed that the channel estimation schemes performed better in an NPR filter bank system as compared with Non-PR filter banks. The low performance of Non-PR system is due to the amplitude distortion and aliasing introduced from the random errors generated in the system that is used to design its prototype filters. It can be concluded that RLS, NLMS, LMS, LMMSE and LS channel estimation schemes offered the best normalized mean square error (NMSE) and bit error rate (BER) performances (in decreasing order) for both waveforms assuming both NPR and Non-PR filter banks. Keywords: Channel estimation, Filter bank, OFDM/OQAM, GFDM/OQAM, NPR, Non-PR, 5G, Frequency selective channel.CK201

Equalization with oversampling in multiuser CDMA systems

Some of the major challenges in the design of new-generation wireless mobile systems are the suppression of multiuser interference (MUI) and inter-symbol interference (ISI) within a single user created by the multipath propagation. Both of these problems were addressed successfully in a recent design of A Mutually Orthogonal Usercode-Receiver (AMOUR) for asynchronous or quasisynchronous code division multiple access (CDMA) systems. AMOUR converts a multiuser CDMA system into parallel single-user systems regardless of the multipath and guarantees ISI mitigation, irrespective of the channel locations. However, the noise amplification at the receiver can be significant in some multipath channels. In this paper, we propose to oversample the received signal as a way of improving the performance of AMOUR systems. We design Fractionally Spaced AMOUR (FSAMOUR) receivers with integral and rational amounts of oversampling and compare their performance with the conventional method. An important point that is often overlooked in the design of zero-forcing channel equalizers is that sometimes, they are not unique. This becomes especially significant in multiuser applications where, as we will show, the nonuniqueness is practically guaranteed. We exploit this flexibility in the design of AMOUR and FSAMOUR receivers and achieve noticeable improvements in performance