Robust Mixed-Criticality Systems

Certification authorities require correctness and survivability. In the temporal domain this requires a convincing argument that all deadlines will be met under error free conditions, and that when certain defined errors occur the behaviour of the system is still predictable and safe. This means that occasional execution-time overruns should be tolerated and where more severe errors occur levels of graceful degradation should be supported. With mixed-criticality systems, fault tolerance must be criticality aware, i.e. some tasks should degrade less than others. In this paper a quantitative notion of robustness is defined, and it is shown how fixed priority-based task scheduling can be structured to maximise the likelihood of a system remaining fail operational or fail robust (the latter implying that an occasional job may be skipped if all other deadlines are met). Analysis is developed for fail operational and fail robust behaviour, optimal priority ordering is addressed and an experimental evaluation is described. Overall, the approach presented allows robustness to be balanced against schedulability. A designer would thus be able to explore the design space so defined

Composition and synchronization of real-time components upon one processor

Many industrial systems have various hardware and software functions for controlling mechanics. If these functions act independently, as they do in legacy situations, their overall performance is not optimal. There is a trend towards optimizing the overall system performance and creating a synergy between the different functions in a system, which is achieved by replacing more and more dedicated, single-function hardware by software components running on programmable platforms. This increases the re-usability of the functions, but their synergy requires also that (parts of) the multiple software functions share the same embedded platform. In this work, we look at the composition of inter-dependent software functions on a shared platform from a timing perspective. We consider platforms comprised of one preemptive processor resource and, optionally, multiple non-preemptive resources. Each function is implemented by a set of tasks; the group of tasks of a function that executes on the same processor, along with its scheduler, is called a component. The tasks of a component typically have hard timing constraints. Fulfilling these timing constraints of a component requires analysis. Looking at a single function, co-operative scheduling of the tasks within a component has already proven to be a powerful tool to make the implementation of a function more predictable. For example, co-operative scheduling can accelerate the execution of a task (making it easier to satisfy timing constraints), it can reduce the cost of arbitrary preemptions (leading to more realistic execution-time estimates) and it can guarantee access to other resources without the need for arbitration by other protocols. Since timeliness is an important functional requirement, (re-)use of a component for composition and integration on a platform must deal with timing. To enable us to analyze and specify the timing requirements of a particular component in isolation from other components, we reserve and enforce the availability of all its specified resources during run-time. The real-time systems community has proposed hierarchical scheduling frameworks (HSFs) to implement this isolation between components. After admitting a component on a shared platform, a component in an HSF keeps meeting its timing constraints as long as it behaves as specified. If it violates its specification, it may be penalized, but other components are temporally isolated from the malignant effects. A component in an HSF is said to execute on a virtual platform with a dedicated processor at a speed proportional to its reserved processor supply. Three effects disturb this point of view. Firstly, processor time is supplied discontinuously. Secondly, the actual processor is faster. Thirdly, the HSF no longer guarantees the isolation of an individual component when two arbitrary components violate their specification during access to non-preemptive resources, even when access is arbitrated via well-defined real-time protocols. The scientific contributions of this work focus on these three issues. Our solutions to these issues cover the system design from component requirements to run-time allocation. Firstly, we present a novel scheduling method that enables us to integrate the component into an HSF. It guarantees that each integrated component executes its tasks exactly in the same order regardless of a continuous or a discontinuous supply of processor time. Using our method, the component executes on a virtual platform and it only experiences that the processor speed is different from the actual processor speed. As a result, we can focus on the traditional scheduling problem of meeting deadline constraints of tasks on a uni-processor platform. For such platforms, we show how scheduling tasks co-operatively within a component helps to meet the deadlines of this component. We compare the strength of these cooperative scheduling techniques to theoretically optimal schedulers. Secondly, we standardize the way of computing the resource requirements of a component, even in the presence of non-preemptive resources. We can therefore apply the same timing analysis to the components in an HSF as to the tasks inside, regardless of their scheduling or their protocol being used for non-preemptive resources. This increases the re-usability of the timing analysis of components. We also make non-preemptive resources transparent during the development cycle of a component, i.e., the developer of a component can be unaware of the actual protocol being used in an HSF. Components can therefore be unaware that access to non-preemptive resources requires arbitration. Finally, we complement the existing real-time protocols for arbitrating access to non-preemptive resources with mechanisms to confine temporal faults to those components in the HSF that share the same non-preemptive resources. We compare the overheads of sharing non-preemptive resources between components with and without mechanisms for confinement of temporal faults. We do this by means of experiments within an HSF-enabled real-time operating system

Concurrency Platforms for Real-Time and Cyber-Physical Systems

Parallel processing is an important way to satisfy the increasingly demanding computational needs of modern real-time and cyber-physical systems, but existing parallel computing technologies primarily emphasize high-throughput and average-case performance metrics, which are largely unsuitable for direct application to real-time, safety-critical contexts. This work contrasts two concurrency platforms designed to achieve predictable worst case parallel performance for soft real-time workloads with millisecond periods and higher. One of these is then the basis for the CyberMech platform, which enables parallel real-time computing for a novel yet representative application called Real-Time Hybrid Simulation (RTHS). RTHS combines demanding parallel real-time computation with real-time simulation and control in an earthquake engineering laboratory environment, and results concerning RTHS characterize a reasonably comprehensive survey of parallel real-time computing in the static context, where the size, shape, timing constraints, and computational requirements of workloads are fixed prior to system runtime. Collectively, these contributions constitute the first published implementations and evaluations of general-purpose concurrency platforms for real-time and cyber-physical systems, explore two fundamentally different design spaces for such systems, and successfully demonstrate the utility and tradeoffs of parallel computing for statically determined real-time and cyber-physical systems

Context-aware adaptation in DySCAS

DySCAS is a dynamically self-configuring middleware for automotive control systems. The addition of autonomic, context-aware dynamic configuration to automotive control systems brings a potential for a wide range of benefits in terms of robustness, flexibility, upgrading etc. However, the automotive systems represent a particularly challenging domain for the deployment of autonomics concepts, having a combination of real-time performance constraints, severe resource limitations, safety-critical aspects and cost pressures. For these reasons current systems are statically configured. This paper describes the dynamic run-time configuration aspects of DySCAS and focuses on the extent to which context-aware adaptation has been achieved in DySCAS, and the ways in which the various design and implementation challenges are met

Predicting Completion Risk in PPP Projects using Big Data Analytics

Accurate prediction of potential delays in public private partnerships (PPP) projects could provide valuable information relevant for planning and mitigating completion risk in future PPP projects. However, existing techniques for evaluating completion risk remain incapable of identifying hidden patterns in risk behavior within large samples of projects, which are increasingly relevant for accurate prediction. To effectively tackle this problem in PPP projects, this study proposes a Big Data Analytics predictive modeling technique for completion risk prediction. With data from 4294 PPP project samples delivered across Europe between 1992 and 2015, a series of predictive models have been devised and evaluated using linear regression, regression trees, random forest, support vector machine, and deep neural network for completion risk prediction. Results and findings from this study reveal that random forest is an effective technique for predicting delays in PPP projects, with lower average test predicting error than other legacy regression techniques. Research issues relating to model selection, training, and validation are also presented in the study