Capacity analysis in different systems exploiting mobility of VANETs

Improving road safety and traffic efficiency has been a long-term endeavor for not only government but also automobile industry and academia. After the U.S. Federal Communication Commission (FCC) allocated a 75 MHz spectrum at 5.9 GHz for vehicular communications, the vehicular ad hoc network (VANET), as an instantiation of the mobile ad hoc network (MANET) with much higher node mobility, opens a new door to combat the road fatalities. In VANETs, a variety of applications ranging from safety related (e.g. emergency report, collision warning) to non-safety-related (e.g. infotainment and entertainment) can be enabled by vehicle-to-vehicle (V2V) and vehicle-to-roadside (V2R) communications. However, the flourish of VANET still hinges fully understanding and managing the challenges that the public concerns, for example, capacity and connectivity issues due to the high mobility of vehicles. In this thesis, we investigate how vehicle mobility can impact the performance in three important VANET-involved systems, i.e., pure VANET, VANET-enhanced intelligent transportation systems (ITS), and fast electric vehicle (EV) charging systems. First, in pure VANET, our work shows that the network data-traffic can be balanced and the network throughput can be improved with the help of the vehicle mobility differentiation. Furthermore, leveraging vehicular communications of VANETs, the mobility-aware real-time path planning can be designed to smooth the vehicle traffic in an ITS, through which the traffic congestion in urban scenarios can be effectively relieved. In addition, with the consideration of the range anxiety caused by mobility, coordinated charging can provide efficient charging plans for electric vehicles (EVs) to improve the overall energy utilization while preventing an electric power system from overloading. To this end, we try to answer the following questions: Q1) How to utilize mobility characteristics of vehicles to derive the achievable asymptotic throughput capacity in pure VANETs? Q2) How to design path planning for mobile vehicles to maximize spatial utility based on mobility differentiation, in order to approach vehicle-traffic capacity in a VANET-enhanced ITS? Q3) How to develop the charging strategies based on mobility of electric vehicles to improve the electricity utility, in order to approach load capacities of charging stations in VANET-enhanced smart grid? To achieve the first objective, we consider the unique features of VANETs and derive the scaling law of VANETs throughput capacity in the data uploading scenario. We show that in both free-space propagation and non-free-space propagation environments, the achievable throughput capacity of individual vehicle scales as $\Theta (\frac{1}{{\log n}}) with$n$denoting the population of a set of homogenous vehicles in the network. To achieve the second objective, we first establish a VANET-enhanced ITS, which incorporates VANETs to enable real-time communications among vehicles, road side units (RSUs), and a vehicle-traffic server in an efficient way. Then, we propose a real-time path planning algorithm, which not only improves the overall spatial utilization of a road network but also reduces average vehicle travel cost for avoiding vehicles from getting stuck in congestion. To achieve the third objective, we investigate a smart grid involved EV fast charging system, with enhanced communication capabilities, i.e., a VANET-enhanced smart grid. It exploits VANETs to support real-time communications among RSUs and highly mobile EVs for real-time vehicle mobility information collection or charging decision dispatch. Then, we propose a mobility-aware coordinated charging strategy for EVs, which not only improves the overall energy utilization while avoiding power system overloading, but also addresses the range anxieties of individual EVs by reducing the average travel cost. In summary, the analysis developed and the scaling law derived in$Q1$of this thesis is practical and fundamental to reveal the relationship between the mobility of vehicles and the network performance in VANETs. And the strategies proposed in$Q2$and$Q3$ of the thesis are meaningful in exploiting/leveraging the vehicle mobility differentiation to improve the system performance in order to approach the corresponding capacities

Quality of service aware data dissemination in vehicular Ad Hoc networks

Des systèmes de transport intelligents (STI) seront éventuellement fournis dans un proche avenir pour la sécurité et le confort des personnes lors de leurs déplacements sur les routes. Les réseaux ad-hoc véhiculaires (VANETs) représentent l'élément clé des STI. Les VANETs sont formés par des véhicules qui communiquent entre eux et avec l'infrastructure. En effet, les véhicules pourront échanger des messages qui comprennent, par exemple, des informations sur la circulation routière, les situations d'urgence et les divertissements. En particulier, les messages d'urgence sont diffusés par des véhicules en cas d'urgence (p.ex. un accident de voiture); afin de permettre aux conducteurs de réagir à temps (p.ex., ralentir), les messages d'urgence doivent être diffusés de manière fiable dans un délai très court. Dans les VANETs, il existe plusieurs facteurs, tels que le canal à pertes, les terminaux cachés, les interférences et la bande passante limitée, qui compliquent énormément la satisfaction des exigences de fiabilité et de délai des messages d'urgence. Dans cette thèse, en guise de première contribution, nous proposons un schéma de diffusion efficace à plusieurs sauts, appelé Dynamic Partitioning Scheme (DPS), pour diffuser les messages d'urgence. DPS calcule les tailles de partitions dynamiques et le calendrier de transmission pour chaque partition; à l'intérieur de la zone arrière de l'expéditeur, les partitions sont calculées de sorte qu'en moyenne chaque partition contient au moins un seul véhicule; l'objectif est de s'assurer que seul un véhicule dans la partition la plus éloignée (de l'expéditeur) est utilisé pour diffuser le message, jusqu'au saut suivant; ceci donne lieu à un délai d'un saut plus court. DPS assure une diffusion rapide des messages d'urgence. En outre, un nouveau mécanisme d'établissement de liaison, qui utilise des tonalités occupées, est proposé pour résoudre le problème du problème de terminal caché. Dans les VANETs, la Multidiffusion, c'est-à-dire la transmission d'un message d'une source à un nombre limité de véhicules connus en tant que destinations, est très importante. Par rapport à la diffusion unique, avec Multidiffusion, la source peut simultanément prendre en charge plusieurs destinations, via une arborescence de multidiffusion, ce qui permet d'économiser de la bande passante et de réduire la congestion du réseau. Cependant, puisque les VANETs ont une topologie dynamique, le maintien de la connectivité de l'arbre de multidiffusion est un problème majeur. Comme deuxième contribution, nous proposons deux approches pour modéliser l'utilisation totale de bande passante d'une arborescence de multidiffusion: (i) la première approche considère le nombre de segments de route impliqués dans l'arbre de multidiffusion et (ii) la seconde approche considère le nombre d'intersections relais dans l'arbre de multidiffusion. Une heuristique est proposée pour chaque approche. Pour assurer la qualité de service de l'arbre de multidiffusion, des procédures efficaces sont proposées pour le suivi des destinations et la surveillance de la qualité de service des segments de route. Comme troisième contribution, nous étudions le problème de la congestion causée par le routage du trafic de données dans les VANETs. Nous proposons (1) une approche de routage basée sur l’infonuagique qui, contrairement aux approches existantes, prend en compte les chemins de routage existants qui relaient déjà les données dans les VANETs. Les nouvelles demandes de routage sont traitées de sorte qu'aucun segment de route ne soit surchargé par plusieurs chemins de routage croisés. Au lieu d'acheminer les données en utilisant des chemins de routage sur un nombre limité de segments de route, notre approche équilibre la charge des données en utilisant des chemins de routage sur l'ensemble des tronçons routiers urbains, dans le but d'empêcher, dans la mesure du possible, les congestions locales dans les VANETs; et (2) une approche basée sur le réseau défini par logiciel (SDN) pour surveiller la connectivité VANET en temps réel et les délais de transmission sur chaque segment de route. Les données de surveillance sont utilisées en entrée de l'approche de routage.Intelligent Transportation Systems (ITS) will be eventually provided in the near future for both safety and comfort of people during their travel on the roads. Vehicular ad-hoc Networks (VANETs), represent the key component of ITS. VANETs consist of vehicles that communicate with each other and with the infrastructure. Indeed, vehicles will be able to exchange messages that include, for example, information about road traffic, emergency situations, and entertainment. Particularly, emergency messages are broadcasted by vehicles in case of an emergency (e.g., car accident); in order to allow drivers to react in time (e.g., slow down), emergency messages must be reliably disseminated with very short delay. In VANETs, there are several factors, such as lossy channel, hidden terminals, interferences and scarce bandwidth, which make satisfying reliability and delay requirements of emergency messages very challenging. In this thesis, as the first contribution, we propose a reliable time-efficient and multi-hop broadcasting scheme, called Dynamic Partitioning Scheme (DPS), to disseminate emergency messages. DPS computes dynamic partition sizes and the transmission schedule for each partition; inside the back area of the sender, the partitions are computed such that in average each partition contains at least a single vehicle; the objective is to ensure that only a vehicle in the farthest partition (from the sender) is used to disseminate the message, to next hop, resulting in shorter one hop delay. DPS ensures fast dissemination of emergency messages. Moreover, a new handshaking mechanism, that uses busy tones, is proposed to solve the problem of hidden terminal problem. In VANETs, Multicasting, i.e. delivering a message from a source to a limited known number of vehicles as destinations, is very important. Compared to Unicasting, with Multicasting, the source can simultaneously support multiple destinations, via a multicast tree, saving bandwidth and reducing overall communication congestion. However, since VANETs have a dynamic topology, maintaining the connectivity of the multicast tree is a major issue. As the second contribution, we propose two approaches to model total bandwidth usage of a multicast tree: (i) the first approach considers the number of road segments involved in the multicast tree and (ii) the second approach considers the number of relaying intersections involved in the multicast tree. A heuristic is proposed for each approach. To ensure QoS of the multicasting tree, efficient procedures are proposed for tracking destinations and monitoring QoS of road segments. As the third contribution, we study the problem of network congestion in routing data traffic in VANETs. We propose (1) a Cloud-based routing approach that, in opposition to existing approaches, takes into account existing routing paths which are already relaying data in VANETs. New routing requests are processed such that no road segment gets overloaded by multiple crossing routing paths. Instead of routing over a limited set of road segments, our approach balances the load of communication paths over the whole urban road segments, with the objective to prevent, whenever possible, local congestions in VANETs; and (2) a Software Defined Networking (SDN) based approach to monitor real-time VANETs connectivity and transmission delays on each road segment. The monitoring data is used as input to the routing approach

Reliable and efficient data dissemination schemein VANET: a review

Vehicular ad-hoc network (VANET), identified as a mobile ad hoc network MANETs with several added constraints. Basically, in VANETs, the network is established on the fly based on the availability of vehicles on roads and supporting infrastructures along the roads, such as base stations. Vehicles and road-side infrastructures are required to provide communication facilities, particularly when enough vehicles are not available on the roads for effective communication. VANETs are crucial for providing a wide range of safety and non-safety applications to road users. However, the specific fundamental problem in VANET is the challenge of creating effective communication between two fast-moving vehicles. Therefore, message routing is an issue for many safety and non-safety of VANETs applications. The challenge in designing a robust but reliable message dissemination technique is primarily due to the stringent QoS requirements of the VANETs safety applications. This paper investigated various methods and conducted literature on an idea to develop a model for efficient and reliable message dissemination routing techniques in VANET

Optimisation of Mobile Communication Networks - OMCO NET

The mini conference “Optimisation of Mobile Communication Networks” focuses on advanced methods for search and optimisation applied to wireless communication networks. It is sponsored by Research & Enterprise Fund Southampton Solent University. The conference strives to widen knowledge on advanced search methods capable of optimisation of wireless communications networks. The aim is to provide a forum for exchange of recent knowledge, new ideas and trends in this progressive and challenging area. The conference will popularise new successful approaches on resolving hard tasks such as minimisation of transmit power, cooperative and optimal routing

Heterogeneous LTE/ Wi-Fi architecture for intelligent transportation systems

Intelligent Transportation Systems (ITS) make use of advanced technologies to enhance road safety and improve traffic efficiency. It is anticipated that ITS will play a vital future role in improving traffic efficiency, safety, comfort and emissions. In order to assist the passengers to travel safely, efficiently and conveniently, several application requirements have to be met simultaneously. In addition to the delivery of regular traffic and safety information, vehicular networks have been recently required to support infotainment services. Previous vehicular network designs and architectures do not satisfy this increasing traffic demand as they are setup for either voice or data traffic, which is not suitable for the transfer of vehicular traffic. This new requirement is one of the key drivers behind the need for new mobile wireless broadband architectures and technologies. For this purpose, this thesis proposes and investigates a heterogeneous IEEE 802.11 and LTE vehicular system that supports both infotainment and ITS traffic control data. IEEE 802.11g is used for V2V communications and as an on-board access network while, LTE is used for V2I communications. A performance simulation-based study is conducted to validate the feasibility of the proposed system in an urban vehicular environment. The system performance is evaluated in terms of data loss, data rate, delay and jitter. Several simulation scenarios are performed and evaluated. In the V2I-only scenario, the delay, jitter and data drops for both ITS and video traffic are within the acceptable limits, as defined by vehicular application requirements. Although a tendency of increase in video packet drops during handover from one eNodeB to another is observed yet, the attainable data loss rate is still below the defined benchmarks. In the integrated V2V-V2I scenario, data loss in uplink ITS traffic was initially observed so, Burst communication technique is applied to prevent packet losses in the critical uplink ITS traffic. A quantitative analysis is performed to determine the number of packets per burst, the inter-packet and inter-burst intervals. It is found that a substantial improvement is achieved using a two-packet Burst, where no packets are lost in the uplink direction. The delay, jitter and data drops for both uplink and downlink ITS traffic, and video traffic are below the benchmarks of vehicular applications. Thus, the results indicate that the proposed heterogeneous system offers acceptable performance that meets the requirements of the different vehicular applications. All simulations are conducted on OPNET Network Modeler and results are subjected to a 95% confidence analysis

Street Smart in 5G : Vehicular Applications, Communication, and Computing

Recent advances in information technology have revolutionized the automotive industry, paving the way for next-generation smart vehicular mobility. Specifically, vehicles, roadside units, and other road users can collaborate to deliver novel services and applications that leverage, for example, big vehicular data and machine learning. Relatedly, fifth-generation cellular networks (5G) are being developed and deployed for low-latency, high-reliability, and high bandwidth communications. While 5G adjacent technologies such as edge computing allow for data offloading and computation at the edge of the network thus ensuring even lower latency and context-awareness. Overall, these developments provide a rich ecosystem for the evolution of vehicular applications, communications, and computing. Therefore in this work, we aim at providing a comprehensive overview of the state of research on vehicular computing in the emerging age of 5G and big data. In particular, this paper highlights several vehicular applications, investigates their requirements, details the enabling communication technologies and computing paradigms, and studies data analytics pipelines and the integration of these enabling technologies in response to application requirements.Peer reviewe

Distributed Data Management in Vehicular Networks Using Mobile Agents

En los últimos años, las tecnologías de la información y las comunicaciones se han incorporado al mundo de la automoción gracias a sus avances, y han permitido la creación de dispositivos cada vez más pequeños y potentes. De esta forma, los vehículos pueden ahora incorporar por un precio asequible equipos informáticos y de comunicaciones.En este escenario, los vehículos que circulan por una determinada zona (como una ciudad o una autopista) pueden comunicarse entre ellos usando dispositivos inalámbricos que les permiten intercambiar información con otros vehículos cercanos, formando así una red vehicular ad hoc, o VANET (Vehicular Ad hoc Network). En este tipo de redes, las comunicaciones se establecen con conexiones punto a punto por medio de dispositivos tipo Wi-Fi, que permiten la comunicación con otros del mismo tipo dentro de su alcance, sin que sea necesaria la existencia previa de una infraestructura de comunicaciones como ocurre con las tecnologías de telefonía móvil (como 3G/4G), que además requieren de una suscripción y el pago de una tarifa para poder usarlas.Cada vehículo puede enviar información y recibirla de diversos orígenes, como el propio vehículo (por medio de los sensores que lleva incorporados), otros vehículos que se encuentran cerca, así como de la infraestructura de tráfico presente en las carreteras (como semáforos, señales, paneles electrónicos de información, cámaras de vigilancia, etc.). Todos estas fuentes pueden transmitir datos de diversa índole, como información de interés para los conductores (por ejemplo, atascos de tráfico o accidentes en la vía), o de cualquier otro tipo, mientras sea posible digitalizarla y enviarla a través de una red.Todos esos datos pueden ser almacenados localmente en los ordenadores que llevan los vehículos a medida que son recibidos, y sería muy interesante poder sacarles partido por medio de alguna aplicación que los explotara. Por ejemplo, podrían utilizarse los vehículos como plataformas móviles de sensores que obtengan datos de los lugares por los que viajan. Otro ejemplo de aplicación sería la de ayudar a encontrar plazas de aparcamiento libres en una zona de una ciudad, usando la información que suministrarían los vehículos que dejan una plaza libre.Con este fin, en esta tesis se ha desarrollado una propuesta de la gestión de datos basada en el uso de agentes móviles para poder hacer uso de la información presente en una VANET de forma eficiente y flexible. Esta no es una tarea trivial, ya que los datos se encuentran dispersos entre los vehículos que forman la red, y dichos vehículos están constantemente moviéndose y cambiando de posición. Esto hace que las conexiones de red establecidas entre ellos sean inestables y de corta duración, ya que están constantemente creándose y destruyéndose a medida que los vehículos entran y salen del alcance de sus comunicaciones debido a sus movimientos.En un escenario tan complicado, la aproximación que proponemos permite que los datos sean localizados, y que se puedan hacer consultas sobre ellos y transmitirlos de un sitio cualquiera de la VANET a otro, usando estrategias multi-salto que se adaptan a las siempre cambiantes posiciones de los vehículos. Esto es posible gracias a la utilización de agentes móviles para el procesamiento de datos, ya que cuentan con una serie de propiedades (como su movilidad, autonomía, adaptabilidad, o inteligencia), que hace que sean una elección muy apropiada para este tipo de entorno móvil y con un elevado grado de incertidumbre.La solución propuesta ha sido extensamente evaluada y probada por medio de simulaciones, que demuestran su buen rendimiento y fiabilidad en redes vehiculares con diferentes condiciones y en diversos escenarios.<br /