Clothoid-Based Three-Dimensional Curve for Attitude Planning

Interest in flying robots, also known as unmanned aerial vehicles (UAVs), has grown during last years in both military and civil fields [1, 2]. The same happens to autonomous underwater vehicles (AUVs) [3]. These vehicles, UAVs and AUVs, offer a wide variety of possible applications and challenges, such as control, guidance or navigation [2, 3]. In this sense, heading and attitude control in UAVs is very important [4], particularly relevant in airplanes (fixed-wing flying vehicles), because they are strongly non-linear, coupled, and tend to be underactuated systems with non-holonomic constraints. Hence, designing a good attitude controller is a difficult task [5, 6, 7, 8, 9], where stability must be taken into account by the controller [10]. Indeed, if the reference is too demanding for the controller or non-achievable because its dynamics is too fast, the vehicle might become unstable. In order to address this issue, autonomous navigation systems usually include a high-level path planner to generate smooth reference trajectories to be followed by the vehicle using a low-level controller. Usually a set of waypoints is given in GPS coordinates, normally from a map, in order to apply a smooth point-to-point control trajectory [11, 12]

Reducing Road Wear While Ensuring Comfort and Charging Constraints for Dynamically Charged Passenger Vehicles Through Noise Shaped Control Inputs

Dynamically charged vehicles suffer from power-loss during wireless power transfer due to vehicle coil misalignment while driving. Autonomous dynamically charged vehicles can maximize wireless power transfer by following an optimal charging path, but the repeated precision increases road wear. To avoid unnecessary road wear and rutting, a path planner can intentionally inject variability into an autonomous vehicle’s path. However, introducing variability into an optimal charging path risks depleting battery life prior to destination arrival, and it increases rider discomfort. Therefore, a path planner is proposed that guarantees average charging criteria and ensures rider comfort while reducing road wear

Clothoid-based Planning and Control in Intelligent Vehicles (Autonomous and Manual-Assisted Driving)

[EN] Nowadays, there are many electronic products that incorporate elements and features coming from the research in the field of mobile robotics. For instance, the well-known vacuum cleaning robot Roomba by iRobot, which belongs to the field of service robotics, one of the most active within the sector. There are also numerous autonomous robotic systems in industrial warehouses and plants. It is the case of Autonomous Guided Vehicles (AGVs), which are able to drive completely autonomously in very structured environments. Apart from industry and consumer electronics, within the automotive field there are some devices that give intelligence to the vehicle, derived in most cases from advances in mobile robotics. In fact, more and more often vehicles incorporate Advanced Driver Assistance Systems (ADAS), such as navigation control with automatic speed regulation, lane change and overtaking assistant, automatic parking or collision warning, among other features. However, despite all the advances there are some problems that remain unresolved and can be improved. Collisions and rollovers stand out among the most common accidents of vehicles with manual or autonomous driving. In fact, it is almost impossible to guarantee driving without accidents in unstructured environments where vehicles share the space with other moving agents, such as other vehicles and pedestrians. That is why searching for techniques to improve safety in intelligent vehicles, either autonomous or manual-assisted driving, is still a trending topic within the robotics community. This thesis focuses on the design of tools and techniques for planning and control of intelligent vehicles in order to improve safety and comfort. The dissertation is divided into two parts, the first one on autonomous driving and the second one on manual-assisted driving. The main link between them is the use of clothoids as mathematical formulation for both trajectory generation and collision detection. Among the problems solved the following stand out: obstacle avoidance, rollover avoidance and advanced driver assistance to avoid collisions with pedestrians.[ES] En la actualidad se comercializan infinidad de productos de electrónica de consumo que incorporan elementos y características procedentes de avances en el sector de la robótica móvil. Por ejemplo, el conocido robot aspirador Roomba de la empresa iRobot, el cual pertenece al campo de la robótica de servicio, uno de los más activos en el sector. También hay numerosos sistemas robóticos autónomos en almacenes y plantas industriales. Es el caso de los vehículos autoguiados (AGVs), capaces de conducir de forma totalmente autónoma en entornos muy estructurados. Además de en la industria y en electrónica de consumo, dentro del campo de la automoción también existen dispositivos que dotan de cierta inteligencia al vehículo, derivados la mayoría de las veces de avances en robótica móvil. De hecho, cada vez con mayor frecuencia los vehículos incorporan sistemas avanzados de asistencia al conductor (ADAS por sus siglas en inglés), tales como control de navegación con regulación automática de velocidad, asistente de cambio de carril y adelantamiento, aparcamiento automático o aviso de colisión, entre otras prestaciones. No obstante, pese a todos los avances siguen existiendo problemas sin resolver y que pueden mejorarse. La colisión y el vuelco destacan entre los accidentes más comunes en vehículos con conducción tanto manual como autónoma. De hecho, la dificultad de conducir en entornos desestructurados compartiendo el espacio con otros agentes móviles, tales como coches o personas, hace casi imposible garantizar la conducción sin accidentes. Es por ello que la búsqueda de técnicas para mejorar la seguridad en vehículos inteligentes, ya sean de conducción autónoma o manual asistida, es un tema que siempre está en auge en la comunidad robótica. La presente tesis se centra en el diseño de herramientas y técnicas de planificación y control de vehículos inteligentes, para la mejora de la seguridad y el confort. La disertación se ha dividido en dos partes, la primera sobre conducción autónoma y la segunda sobre conducción manual asistida. El principal nexo de unión es el uso de clotoides como elemento de generación de trayectorias y detección de colisiones. Entre los problemas que se resuelven destacan la evitación de obstáculos, la evitación de vuelcos y la asistencia avanzada al conductor para evitar colisiones con peatones.[CA] En l'actualitat es comercialitzen infinitat de productes d'electrònica de consum que incorporen elements i característiques procedents d'avanços en el sector de la robòtica mòbil. Per exemple, el conegut robot aspirador Roomba de l'empresa iRobot, el qual pertany al camp de la robòtica de servici, un dels més actius en el sector. També hi ha nombrosos sistemes robòtics autònoms en magatzems i plantes industrials. És el cas dels vehicles autoguiats (AGVs), els quals són capaços de conduir de forma totalment autònoma en entorns molt estructurats. A més de en la indústria i en l'electrònica de consum, dins el camp de l'automoció també existeixen dispositius que doten al vehicle de certa intel·ligència, la majoria de les vegades derivats d'avanços en robòtica mòbil. De fet, cada vegada amb més freqüència els vehicles incorporen sistemes avançats d'assistència al conductor (ADAS per les sigles en anglés), com ara control de navegació amb regulació automàtica de velocitat, assistent de canvi de carril i avançament, aparcament automàtic o avís de col·lisió, entre altres prestacions. No obstant això, malgrat tots els avanços segueixen existint problemes sense resoldre i que poden millorar-se. La col·lisió i la bolcada destaquen entre els accidents més comuns en vehicles amb conducció tant manual com autònoma. De fet, la dificultat de conduir en entorns desestructurats compartint l'espai amb altres agents mòbils, tals com cotxes o persones, fa quasi impossible garantitzar la conducció sense accidents. És per això que la recerca de tècniques per millorar la seguretat en vehicles intel·ligents, ja siguen de conducció autònoma o manual assistida, és un tema que sempre està en auge a la comunitat robòtica. La present tesi es centra en el disseny d'eines i tècniques de planificació i control de vehicles intel·ligents, per a la millora de la seguretat i el confort. La dissertació s'ha dividit en dues parts, la primera sobre conducció autònoma i la segona sobre conducció manual assistida. El principal nexe d'unió és l'ús de clotoides com a element de generació de trajectòries i detecció de col·lisions. Entre els problemes que es resolen destaquen l'evitació d'obstacles, l'evitació de bolcades i l'assistència avançada al conductor per evitar col·lisions amb vianants.Girbés Juan, V. (2016). Clothoid-based Planning and Control in Intelligent Vehicles (Autonomous and Manual-Assisted Driving) [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/65072TESI

Development of vision-based soft sensing techniques with training in virtual environment for autonomous vehicle control

The goal of this master thesis is to develop an original approach to lane estimation for scaled vehicles using a front-mounted camera and convolutional neural networks. The key components of this estimation process are the fact that all the training is performed in simulation using a noisy path; and the online inference is performed on low-end hardware (Raspberry Pi 4) in an efficient and responsive way, while being very accurate. The heading error of the standard pure pursuit controller is chosen as estimation target. A clothoid based centerline has been chosen as training path for its several advantages in the analyzed scenario. Different performance metrics are evaluated and the standard deviation of the error is found to be the more effective. An analysis on the hyperparameters (image dimension, lookahead distance, training variability, and others) is performed in order to find the best combinations and evaluate the impact of each parameter. From the results in a real world scenario a very small network and image and a very high training variability resulted as the best overall combination, with the network complexity and training variability playing a major role in the accuracy of the system. The whole process is finally tested in a real life control loop achieving very good performance, allowing for precise lane tracking using delayless local estimation.The goal of this master thesis is to develop an original approach to lane estimation for scaled vehicles using a front-mounted camera and convolutional neural networks. The key components of this estimation process are the fact that all the training is performed in simulation using a noisy path; and the online inference is performed on low-end hardware (Raspberry Pi 4) in an efficient and responsive way, while being very accurate. The heading error of the standard pure pursuit controller is chosen as estimation target. A clothoid based centerline has been chosen as training path for its several advantages in the analyzed scenario. Different performance metrics are evaluated and the standard deviation of the error is found to be the more effective. An analysis on the hyperparameters (image dimension, lookahead distance, training variability, and others) is performed in order to find the best combinations and evaluate the impact of each parameter. From the results in a real world scenario a very small network and image and a very high training variability resulted as the best overall combination, with the network complexity and training variability playing a major role in the accuracy of the system. The whole process is finally tested in a real life control loop achieving very good performance, allowing for precise lane tracking using delayless local estimation

Autonomous Navigation of Mobile Robots in Complex Dynamic Environments

Most of the future robots will be mobile, and the main challenge is to develop algorithms for their autonomous navigation as well as for human-robot interactions. The Laboratory for Autonomous Systems and Mobile Robotics (LAMOR) at the Faculty of Electrical Engineering and Computing of the University of Zagreb is involved in the research of such mobile robotic systems, and currently participates in a number of related international and national research projects. This paper addresses the issue of autonomous navigation of mobile robots in complex dynamic environments, providing state of the art of the domain and major LAMOR’s contribution to it. At the end, we present an application example of the autonomous navigation technologies in flexible warehouses, which we have been developing within a Horizon 2020 project SafeLog

Toolpath Smoothing using Clothoids for High Speed CNC Machines

As a result of this research, new methods for CNC toolpath smoothing were developed. Utilising these methods can increase the speed, decrease vibrations and improve the cut quality of a CNC machine. In the developed techniques, Euler spirals have been used to smooth the corners

A Novel of Repulsive Function on Artificial Potential Field for Robot Path Planning

In this paper, the issue of local minima associated with GNRON (Goal Nonreachable with Obstacles Nearby) has been solved on the Artificial Potential Field (APF) for robot path planning. A novel of repulsive potential function is proposed to solve the problem. The consideration of surrounding repulsive forces gives a trigger to escape from the local mi- nima. Addition of signum function on the repulsive force which considers relative distance between the robot and the goal ensures that the goal position is the global optima of the total potential. Simulation conducted to prove that the proposed algorithm can solve GNRON and local minima problem on APF. Scenario of each simulation set in different type of obs- tacle and goal condition. The results show that the proposed method is able to handle local minima and GNRON problem

Optimal steering for kinematic vehicles with applications to spatially distributed agents

The recent technological advances in the field of autonomous vehicles have resulted in a growing impetus for researchers to improve the current framework of mission planning and execution within both the military and civilian contexts. Many recent efforts towards this direction emphasize the importance of replacing the so-called monolithic paradigm, where a mission is planned, monitored, and controlled by a unique global decision maker, with a network centric paradigm, where the same mission related tasks are performed by networks of interacting decision makers (autonomous vehicles). The interest in applications involving teams of autonomous vehicles is expected to significantly grow in the near future as new paradigms for their use are constantly being proposed for a diverse spectrum of real world applications. One promising approach to extend available techniques for addressing problems involving a single autonomous vehicle to those involving teams of autonomous vehicles is to use the concept of Voronoi diagram as a means for reducing the complexity of the multi-vehicle problem. In particular, the Voronoi diagram provides a spatial partition of the environment the team of vehicles operate in, where each element of this partition is associated with a unique vehicle from the team. The partition induces, in turn, a graph abstraction of the operating space that is in a one-to-one correspondence with the network abstraction of the team of autonomous vehicles; a fact that can provide both conceptual and analytical advantages during mission planning and execution. In this dissertation, we propose the use of a new class of Voronoi-like partitioning schemes with respect to state-dependent proximity (pseudo-) metrics rather than the Euclidean distance or other generalized distance functions, which are typically used in the literature. An important nuance here is that, in contrast to the Euclidean distance, state-dependent metrics can succinctly capture system theoretic features of each vehicle from the team (e.g., vehicle kinematics), as well as the environment-vehicle interactions, which are induced, for example, by local winds/currents. We subsequently illustrate how the proposed concept of state-dependent Voronoi-like partition can induce local control schemes for problems involving networks of spatially distributed autonomous vehicles by examining different application scenarios.PhDCommittee Chair: Tsiotras Panagiotis; Committee Member: Egerstedt Magnus; Committee Member: Feron Eric; Committee Member: Haddad Wassim; Committee Member: Shamma Jef