NASA Center for Intelligent Robotic Systems for Space Exploration

NASA's program for the civilian exploration of space is a challenge to scientists and engineers to help maintain and further develop the United States' position of leadership in a focused sphere of space activity. Such an ambitious plan requires the contribution and further development of many scientific and technological fields. One research area essential for the success of these space exploration programs is Intelligent Robotic Systems. These systems represent a class of autonomous and semi-autonomous machines that can perform human-like functions with or without human interaction. They are fundamental for activities too hazardous for humans or too distant or complex for remote telemanipulation. To meet this challenge, Rensselaer Polytechnic Institute (RPI) has established an Engineering Research Center for Intelligent Robotic Systems for Space Exploration (CIRSSE). The Center was created with a five year $5.5 million grant from NASA submitted by a team of the Robotics and Automation Laboratories. The Robotics and Automation Laboratories of RPI are the result of the merger of the Robotics and Automation Laboratory of the Department of Electrical, Computer, and Systems Engineering (ECSE) and the Research Laboratory for Kinematics and Robotic Mechanisms of the Department of Mechanical Engineering, Aeronautical Engineering, and Mechanics (ME,AE,&M), in 1987. This report is an examination of the activities that are centered at CIRSSE

Printing-while-moving: a new paradigm for large-scale robotic 3D Printing

Building and Construction have recently become an exciting application ground for robotics. In particular, rapid progress in materials formulation and in robotics technology has made robotic 3D Printing of concrete a promising technique for in-situ construction. Yet, scalability remains an important hurdle to widespread adoption: the printing systems (gantry- based or arm-based) are often much larger than the structure to be printed, hence cumbersome. Recently, a mobile printing system - a manipulator mounted on a mobile base - was proposed to alleviate this issue: such a system, by moving its base, can potentially print a structure larger than itself. However, the proposed system could only print while being stationary, imposing thereby a limit on the size of structures that can be printed in a single take. Here, we develop a system that implements the printing-while-moving paradigm, which enables printing single-piece structures of arbitrary sizes with a single robot. This development requires solving motion planning, localization, and motion control problems that are specific to mobile 3D Printing. We report our framework to address those problems, and demonstrate, for the first time, a printing-while-moving experiment, wherein a 210 cm x 45 cm x 10 cm concrete structure is printed by a robot arm that has a reach of 87 cm.Comment: 6 pages, 7 figur

Safe motion planning under uncertainty for mobile manipulators in unknown environments

For a mobile manipulator to operate and perform useful tasks in human-centered environments, it is important to work toward the realization of robust motion planners that incorporate uncertainty inherent in robot\u27s control and sensing and provide safe motion plans for reliable robot operation. Designing such planners pose a significant challenge because of computational complexity associated with mobile manipulator planning and planning under uncertainty. Current planning approaches for mobile manipulation are often conservative in nature and the uncertainty is largely ignored. In this thesis, we propose sampling-based efficient and robust mobile manipulator planners that use smart strategies to deal with computational complexity and incorporate uncertainty to generate safer plans. The first part of the research addresses the design of an efficient planner for deterministic case, where robot state is fully known, and then subsequent extension to incorporate base pose uncertainty. In the first part, we propose a Hierarchical and Adaptive Mobile Manipulator Planner (HAMP) that plans both for the base and the arm in a judicious manner - allowing the manipulator to change its configuration autonomously when needed if the current arm configuration is in collision with the environment as the mobile manipulator moves along the planned path. We show that HAMP is probabilistically complete. We then propose an extension of HAMP (HAMP-U) to account for localization uncertainty associated with the mobile base position. The advantages of our planners are illustrated and discussed. The second part of the research deals with the computational complexity involved in planning under uncertainty. For that, we propose localization aware sampling and connection strategies that help to reduce the planning time significantly with little compromise on the quality of path. In the third part, we learnt from the shortcomings of HAMP-U and took advantage of our smart strategies developed to combat the computational complexity. We propose an efficient and robust mobile manipulator planner (HAMP-BAU) that plans judiciously and considers the base pose uncertainty and the effects of this uncertainty on manipulator motions. It uses our localization aware sampling and connection strategies to consider only those nodes and edges which contribute toward better localization. This helps to find the same quality of path in shorter time. We also extend HAMP-BAU to incorporate task space constraints (HAMP-BAU-TC). Finally, in the last part of the work, we incorporate our planners (HAMP-BAU and HAMP-BAU-TC) within an integrated and fully autonomous system for mobile pick-and-place tasks in unknown static environments. We demonstrate our system both in simulation and real experiments on SFU mobile manipulator