Real Time Tracking of Moving Objects with an Active Camera

This article is concerned with the design and implementation of a system for real time monocular tracking of a moving object using the two degrees of freedom of a camera platform. Figure-ground segregation is based on motion without making any a priori assumptions about the object form. Using only the first spatiotemporal image derivatives subtraction of the normal optical flow induced by camera motion yields the object image motion. Closed-loop control is achieved by combining a stationary Kalman estimator with an optimal Linear Quadratic Regulator. The implementation on a pipeline architecture enables a servo rate of 25 Hz. We study the effects of time-recursive filtering and fixed-point arithmetic in image processing and we test the performance of the control algorithm on controlled motion of objects

Realtime object extraction and tracking with an active camera using image mosaics

[[abstract]]Moving object extraction plays a key role in applications such as object-based videoconference, surveillance, and so on. The dimculties of moving object segmentation lie in the fact that physical objects are normally not homogeneous with to low-level features and it's usually tough to segment them accnrately and efficiently. Object segmentation based on prestored background information has proved to be effective and efficient in several applications such as videophone, video conferencing, and surveillance, etc. The previous works, however, were mainly concentrated on object segmentation with a static camera and in a stationary background. In this paper, we propose a robust and fast segmentation algorithm and a reliable tracking strategy without knowing the shape of the object in advance. The proposed system can real-time extract the foreground from the background and track the moving object with an active (pan-tilt) camera such that the moving object always stays around the center of images.[[fileno]]2030144030033[[department]]電機工程學

Real-time spatial modeling to detect and track resources on construction sites

For more than 10 years the U.S. construction industry has experienced over 1,000 fatalities annually. Many fatalities may have been prevented had the individuals and equipment involved been more aware of and alert to the physical state of the environment around them. Awareness may be improved by automatic 3D (three-dimensional) sensing and modeling of the job site environment in real-time. Existing 3D modeling approaches based on range scanning techniques are capable of modeling static objects only, and thus cannot model in real-time dynamic objects in an environment comprised of moving humans, equipment, and materials. Emerging prototype 3D video range cameras offer another alternative by facilitating affordable, wide field of view, automated static and dynamic object detection and tracking at frame rates better than 1Hz (real-time). This dissertation presents an imperical work and methodology to rapidly create a spatial model of construction sites and in particular to detect, model, and track the position, dimension, direction, and velocity of static and moving project resources in real-time, based on range data obtained from a three-dimensional video range camera in a static or moving position. Existing construction site 3D modeling approaches based on optical range sensing technologies (laser scanners, rangefinders, etc.) and 3D modeling approaches (dense, sparse, etc.) that offered potential solutions for this research are reviewed. The choice of an emerging sensing tool and preliminary experiments with this prototype sensing technology are discussed. These findings led to the development of a range data processing algorithm based on three-dimensional occupancy grids which is demonstrated in detail. Testing and validation of the proposed algorithms have been conducted to quantify the performance of sensor and algorithm through extensive experimentation involving static and moving objects. Experiments in indoor laboratory and outdoor construction environments have been conducted with construction resources such as humans, equipment, materials, or structures to verify the accuracy of the occupancy grid modeling approach. Results show that modeling objects and measuring their position, dimension, direction, and speed had an accuracy level compatible to the requirements of active safety features for construction. Results demonstrate that video rate 3D data acquisition and analysis of construction environments can support effective detection, tracking, and convex hull modeling of objects. Exploiting rapidly generated three-dimensional models for improved visualization, communications, and process control has inherent value, broad application, and potential impact, e.g. as-built vs. as-planned comparison, condition assessment, maintenance, operations, and construction activities control. In combination with effective management practices, this sensing approach has the potential to assist equipment operators to avoid incidents that result in reduce human injury, death, or collateral damage on construction sites.Civil, Architectural, and Environmental Engineerin

Co-Fusion: Real-time Segmentation, Tracking and Fusion of Multiple Objects

In this paper we introduce Co-Fusion, a dense SLAM system that takes a live stream of RGB-D images as input and segments the scene into different objects (using either motion or semantic cues) while simultaneously tracking and reconstructing their 3D shape in real time. We use a multiple model fitting approach where each object can move independently from the background and still be effectively tracked and its shape fused over time using only the information from pixels associated with that object label. Previous attempts to deal with dynamic scenes have typically considered moving regions as outliers, and consequently do not model their shape or track their motion over time. In contrast, we enable the robot to maintain 3D models for each of the segmented objects and to improve them over time through fusion. As a result, our system can enable a robot to maintain a scene description at the object level which has the potential to allow interactions with its working environment; even in the case of dynamic scenes.Comment: International Conference on Robotics and Automation (ICRA) 2017, http://visual.cs.ucl.ac.uk/pubs/cofusion, https://github.com/martinruenz/co-fusio

Real-time detection and tracking of multiple objects with partial decoding in H.264/AVC bitstream domain

In this paper, we show that we can apply probabilistic spatiotemporal macroblock filtering (PSMF) and partial decoding processes to effectively detect and track multiple objects in real time in H.264|AVC bitstreams with stationary background. Our contribution is that our method cannot only show fast processing time but also handle multiple moving objects that are articulated, changing in size or internally have monotonous color, even though they contain a chaotic set of non-homogeneous motion vectors inside. In addition, our partial decoding process for H.264|AVC bitstreams enables to improve the accuracy of object trajectories and overcome long occlusion by using extracted color information.Comment: SPIE Real-Time Image and Video Processing Conference 200

Event-based Vision: A Survey

Event cameras are bio-inspired sensors that differ from conventional frame cameras: Instead of capturing images at a fixed rate, they asynchronously measure per-pixel brightness changes, and output a stream of events that encode the time, location and sign of the brightness changes. Event cameras offer attractive properties compared to traditional cameras: high temporal resolution (in the order of microseconds), very high dynamic range (140 dB vs. 60 dB), low power consumption, and high pixel bandwidth (on the order of kHz) resulting in reduced motion blur. Hence, event cameras have a large potential for robotics and computer vision in challenging scenarios for traditional cameras, such as low-latency, high speed, and high dynamic range. However, novel methods are required to process the unconventional output of these sensors in order to unlock their potential. This paper provides a comprehensive overview of the emerging field of event-based vision, with a focus on the applications and the algorithms developed to unlock the outstanding properties of event cameras. We present event cameras from their working principle, the actual sensors that are available and the tasks that they have been used for, from low-level vision (feature detection and tracking, optic flow, etc.) to high-level vision (reconstruction, segmentation, recognition). We also discuss the techniques developed to process events, including learning-based techniques, as well as specialized processors for these novel sensors, such as spiking neural networks. Additionally, we highlight the challenges that remain to be tackled and the opportunities that lie ahead in the search for a more efficient, bio-inspired way for machines to perceive and interact with the world

Independent Motion Detection with Event-driven Cameras

Unlike standard cameras that send intensity images at a constant frame rate, event-driven cameras asynchronously report pixel-level brightness changes, offering low latency and high temporal resolution (both in the order of micro-seconds). As such, they have great potential for fast and low power vision algorithms for robots. Visual tracking, for example, is easily achieved even for very fast stimuli, as only moving objects cause brightness changes. However, cameras mounted on a moving robot are typically non-stationary and the same tracking problem becomes confounded by background clutter events due to the robot ego-motion. In this paper, we propose a method for segmenting the motion of an independently moving object for event-driven cameras. Our method detects and tracks corners in the event stream and learns the statistics of their motion as a function of the robot's joint velocities when no independently moving objects are present. During robot operation, independently moving objects are identified by discrepancies between the predicted corner velocities from ego-motion and the measured corner velocities. We validate the algorithm on data collected from the neuromorphic iCub robot. We achieve a precision of ~ 90 % and show that the method is robust to changes in speed of both the head and the target.Comment: 7 pages, 6 figure

Cognitive visual tracking and camera control

Cognitive visual tracking is the process of observing and understanding the behaviour of a moving person. This paper presents an efficient solution to extract, in real-time, high-level information from an observed scene, and generate the most appropriate commands for a set of pan-tilt-zoom (PTZ) cameras in a surveillance scenario. Such a high-level feedback control loop, which is the main novelty of our work, will serve to reduce uncertainties in the observed scene and to maximize the amount of information extracted from it. It is implemented with a distributed camera system using SQL tables as virtual communication channels, and Situation Graph Trees for knowledge representation, inference and high-level camera control. A set of experiments in a surveillance scenario show the effectiveness of our approach and its potential for real applications of cognitive vision

leave a trace - A People Tracking System Meets Anomaly Detection

Video surveillance always had a negative connotation, among others because of the loss of privacy and because it may not automatically increase public safety. If it was able to detect atypical (i.e. dangerous) situations in real time, autonomously and anonymously, this could change. A prerequisite for this is a reliable automatic detection of possibly dangerous situations from video data. This is done classically by object extraction and tracking. From the derived trajectories, we then want to determine dangerous situations by detecting atypical trajectories. However, due to ethical considerations it is better to develop such a system on data without people being threatened or even harmed, plus with having them know that there is such a tracking system installed. Another important point is that these situations do not occur very often in real, public CCTV areas and may be captured properly even less. In the artistic project leave a trace the tracked objects, people in an atrium of a institutional building, become actor and thus part of the installation. Visualisation in real-time allows interaction by these actors, which in turn creates many atypical interaction situations on which we can develop our situation detection. The data set has evolved over three years and hence, is huge. In this article we describe the tracking system and several approaches for the detection of atypical trajectories