A Dense Reference Network for Mass-Market Centimeter-Accurate Positioning

The quality of atmospheric corrections provided by a dense reference network for centimeter-accurate carrierphase differential GNSS (CDGNSS) positioning is investigated. A dense reference network (less than 20 km inter-station distance) offers significant benefits for mass-market users, enabling lowcost (including single-frequency) CDGNSS positioning with rapid integer ambiguity resolution. Precise positioning on a massmarket platform would significantly influence the world economy, ushering in a host of consumer-focused applications such as globally-registered augmented and virtual reality and improved all-weather safety and efficiency for intelligent transportation systems, applications which have so far been hampered by the several-meter-level errors in standard GNSS positioning. This contribution examines CDGNSS integer ambiguity resolution performance in terms of network correction uncertainty, and network correction uncertainty, in turn, in terms of network density. It considers the total error in network corrections: a sum of ionospheric, tropospheric, and reference station multipath components. The paper’s primary goal is to identify the network density beyond which mass-market users would see no further significant improvement in ambiguity resolution performance. It finishes by describing development and deployment of a low-cost dense reference network in Austin, Texas.Aerospace Engineering and Engineering Mechanic

Mass-Market Receiver for Static Positioning: Tests and Statistical Analyses

Nowadays, there are several low cost GPS receivers able to provide both pseudorange and carrier phase measurements in the L1band, that allow to have good realtime performances in outdoor condition. The present paper describes a set of dedicated tests in order to evaluate the positioning accuracy in static conditions. The quality of the pseudorange and the carrier phase measurements let hope for interesting results. The use of such kind of receiver could be extended to a large number of professional applications, like engineering fields: survey, georeferencing, monitoring, cadastral mapping and cadastral road. In this work, the receivers performance is verified considering a single frequency solution trying to fix the phase ambiguity, when possible. Different solutions are defined: code, float and fix solutions. In order to solve the phase ambiguities different methods are considered. Each test performed is statistically analyzed, highlighting the effects of different factors on precision and accurac

Client-server-based LBS architecture: A novel positioning module for improved positioning performance

Permission to distribute obtained from publisher.This work presents a new efficient positioning module that operates over client-server LBS architectures. The aim of the proposed module is to fulfil the position information requirements for LBS pedestrian applications by ensuring the availability of reliable, highly accurate and precise position solutions based on GPS single frequency (L1) positioning service. The positioning module operates at both LBS architecture sides; the client (mobile device), and the server (positioning server). At the server side, the positioning module is responsible for correcting user’s location information based on WADGPS corrections. In addition, at the mobile side, the positioning module is continually in charge for monitoring the integrity and available of the position solutions as well as managing the communication with the server. The integrity monitoring was based on EGNOS integrity methods. A prototype of the proposed module was developed and used in experimental trials to evaluate the efficiency of the module in terms of the achieved positioning performance. The positioning module was capable of achieving a horizontal accuracy of less than 2 meters with a 95% confidence level with integrity improvement of more than 30% from existing GPS/EGNOS services

Robust Positioning in the Presence of Multipath and NLOS GNSS Signals

GNSS signals can be blocked and reflected by nearby objects, such as buildings, walls, and vehicles. They can also be reflected by the ground and by water. These effects are the dominant source of GNSS positioning errors in dense urban environments, though they can have an impact almost anywhere. Non- line-of-sight (NLOS) reception occurs when the direct path from the transmitter to the receiver is blocked and signals are received only via a reflected path. Multipath interference occurs, as the name suggests, when a signal is received via multiple paths. This can be via the direct path and one or more reflected paths, or it can be via multiple reflected paths. As their error characteristics are different, NLOS and multipath interference typically require different mitigation techniques, though some techniques are applicable to both. Antenna design and advanced receiver signal processing techniques can substantially reduce multipath errors. Unless an antenna array is used, NLOS reception has to be detected using the receiver's ranging and carrier-power-to-noise-density ratio (C/N0) measurements and mitigated within the positioning algorithm. Some NLOS mitigation techniques can also be used to combat severe multipath interference. Multipath interference, but not NLOS reception, can also be mitigated by comparing or combining code and carrier measurements, comparing ranging and C/N0 measurements from signals on different frequencies, and analyzing the time evolution of the ranging and C/N0 measurements

GPS Ionospheric mapping and tomography: A case of study in a geomagnetic storm

The ionosphere has been normally detected by traditional instruments, such as ionosonde, scatter radars, topside sounders onboard satellites and in situ rocket. However, most instruments are expensive and also restricted to either the bottomside ionosphere or the lower part of the topside ionosphere (usually lower than 800 km), such as ground based radar measurements. Nowadays, GPS satellites in high altitude orbits (~20,200 km) are capable of providing details on the structure of the entire ionosphere, even the plasmasphere. In this paper, a Regional Ionospheric Mapping and Tomography (RIMT) tool was developed, which can be used to retrieve 2-D TEC and 3-D ionospheric electron density profiles using ground-based or space-borne GPS measurements. Some results are presented from the RIMT tool using regional GPS networks in South Korea and validated using the independent ionosonde. GPS can provide time-varying ionospheric profiles and information at any specified grid related to ionospheric activities and states, including the electron density response at the F2-layer peak (the NmF2) during geomagnetic storms.Comment: Proceeding of IEEE International Geoscience and Remote Sensing Symposium (IGARSS), 24-29 July, 2011, Vancouver, Canad

FLAMINGO – Fulfilling enhanced location accuracy in the mass-market through initial GalileO services

This paper discusses FLAMINGO, an initiative that will provide a high accuracy positioning service to be used by mass market applications. The status and future for the initiative are discussed, the required accuracies and other location parameters are described, and the target applications are identified. Finally, the currently achieved accuracies from today’s Smartphones are assessed and presented. FLAMINGO (Fulfilling enhanced Location Accuracy in the Mass-market through Initial GalileO services), part funded through the European GNSS Agency, is a collaborative venture comprising NSL (as lead organization), Telespazio France, University of Nottingham, Rokubun, Thales Alenia Space France, VVA, BQ, ECLEXYS and Blue Dot Solutions. The initiative is developing the infrastructure, solutions and services to enable the use of accurate and precise GNSS within the mass-market, thereby operating predominantly in an urban environment. Whilst mass-market receivers are yet to achieve accuracies below one metre for standard positioning, the introduction of Android raw GNSS measurements and the Broadcom dual frequency chipset (BCM47755), has presented the devices such an opportunity. FLAMINGO will enable and demonstrate the future of high accuracy positioning and navigation information on mass-market devices such as smartphones and Internet of Things (IoT) devices by producing a service delivering accuracies of 50cm (at 95%) and better, employing multi-constellation, PPP and RTK mechanisms, power consumption optimisation techniques. Whereas the Galileo High Accuracy Service targets 10cm precision within professional markets, FLAMINGO targets 30-50cm precision in the mass-market consumer markets. By targeting accuracies of a few decimetres, a range of improved and new applications in diverse market sectors are introduced. These sectors include, but are not limited to, mapping and GIS, autonomous vehicles, AR environments, mobile-location based gaming and people tracking. To obtain such high accuracies with mass market devices, FLAMINGO must overcome several challenges which are technical, operational and environmental. This includes the hardware capabilities of most mass-market devices, where components such as antennas and processors are prioritised for other purposes. We demonstrate that, despite these challenges, FLAMINGO has the potential to meet the accuracy required. Tests with the current Smartphones that provide access to multi-constellation raw measurements (the dual frequency Xiaomi Mi 8 and single frequency Samsung S8 and Huawei P10) demonstrate significant improvements to the PVT solution when processing using both RTK and PPP techniques

Quasi-4-dimension ionospheric modeling and its application in PPP

The version of record of this article, first published in Satellite Navigation, is available online at Publisher’s website: http://dx.doi.org/10.1186/s43020-022-00085-zIonospheric delay modeling is not only important for GNSS based space weather study and monitoring, but also an efficient tool to overcome the long convergence time of PPP. In this study, a novel model, denoted as Q4DIM (Quasi-4-dimension ionospheric modeling) is proposed for wide-area high precision ionospheric delay correction. In Q4DIM, the LOS (line of sight) ionospheric delay from a GNSS station network is divided into different clusters according to not only latitude and longitude, but also elevation and azimuth. Both GIM (global ionosphere map) and SID (slant ionospheric delay) that traditionally used for wide-area and regional ionospheric delay modeling, respectively, can be regarded as special case of Q4DIM by defining proper grids in latitude, longitude, elevation and azimuth. Thus, Q4DIM presents a resilient model that is capable for both wide-area coverage and high precision. Then four different sets of clusters are defined to illustrate the properties of Q4DIM based on 200 EPN stations. The results suggested that Q4DIM is compatible with the widely acknowledged GIM products. Moreover, it is proved that by inducting the elevation and azimuth angle dependent residuals, the precision of the 2-dimensional GIM-like model, i.e., Q4DIM-2D, is improved from around 1.5 TECU to better than 0.5 TECU. In addition, by treating Q4DIM as a 4-dimensional matrix in latitude, longitude, elevation and azimuth, its sparsity is less than 5%, thus guarantees its feasibility in a bandwidth-sensitive applications, e.g., satellite-based PPP-RTK service. Finally, the advantage of Q4DIM in single frequency PPP over the 2-dimensional models is demonstrated with one month’s data from 30 EPN stations.Peer ReviewedPostprint (published version

Precise Point Positioning Augmentation for Various Grades of Global Navigation Satellite System Hardware

The next generation of low-cost, dual-frequency, multi-constellation GNSS receivers, boards, chips and antennas are now quickly entering the market, offering to disrupt portions of the precise GNSS positioning industry with much lower cost hardware and promising to provide precise positioning to a wide range of consumers. The presented work provides a timely, novel and thorough investigation into the positioning performance promise. A systematic and rigorous set of experiments has been carried-out, collecting measurements from a wide array of low-cost, dual-frequency, multi-constellation GNSS boards, chips and antennas introduced in late 2018 and early 2019. These sensors range from dual-frequency, multi-constellation chips in smartphones to stand-alone chips and boards. In order to be comprehensive and realistic, these experiments were conducted in a number of static and kinematic benign, typical, suburban and urban environments. In terms of processing raw measurements from these sensors, the Precise Point Positioning (PPP) GNSS measurement processing mode was used. PPP has become the defacto GNSS positioning and navigation technique for scientific and engineering applications that require dm- to cm-level positioning in remote areas with few obstructions and provides for very efficient worldwide, wide-array augmentation corrections. To enhance solution accuracy, novel contributions were made through atmospheric constraints and the use of dual- and triple-frequency measurements to significantly reduce PPP convergence period. Applying PPP correction augmentations to smartphones and recently released low-cost equipment, novel analyses were made with significantly improved solution accuracy. Significant customization to the York-PPP GNSS measurement processing engine was necessary, especially in the quality control and residual analysis functions, in order to successfully process these datasets. Results for new smartphone sensors show positioning performance is typically at the few dm-level with a convergence period of approximately 40 minutes, which is 1 to 2 orders of magnitude better than standard point positioning. The GNSS chips and boards combined with higher-quality antennas produce positioning performance approaching geodetic quality. Under ideal conditions, carrier-phase ambiguities are resolvable. The results presented show a novel perspective and are very promising for the use of PPP (as well as RTK) in next-generation GNSS sensors for various application in smartphones, autonomous vehicles, Internet of things (IoT), etc