An approach to high speed ship ride quality simulation

The high speeds attained by certain advanced surface ships result in a spectrum of motion which is higher in frequency than that of conventional ships. This fact along with the inclusion of advanced ride control features in the design of these ships resulted in an increased awareness of the need for ride criteria. Such criteria can be developed using data from actual ship operations in varied sea states or from clinical laboratory experiments. A third approach is to simulate ship conditions using measured or calculated ship motion data. Recent simulations have used data derived from a math model of Surface Effect Ship (SES) motion. The model in turn is based on equations of motion which have been refined with data from scale models and SES of up to 101 600-kg (100-ton) displacement. Employment of broad band motion emphasizes the use of the simulators as a design tool to evaluate a given ship configuration in several operational situations and also serves to provide data as to the overall effect of a given motion on crew performance and physiological status

Experimental investigation of the mooring system of a wave energy converter in operating and extreme wave conditions

A proper design of the mooring systems for Wave Energy Converters (WECs) requires an accurate investigation of both operating and extreme wave conditions. A careful analysis of these systems is required to design a mooring configuration that ensures station keeping, reliability, maintainability, and low costs, without affecting the WEC dynamics. In this context, an experimental campaign on a 1:20 scaled prototype of the ISWEC (Inertial Sea Wave Energy Converter), focusing on the influence of the mooring layout on loads in extreme wave conditions, is presented and discussed. Two mooring configurations composed of multiple slack catenaries with sub-surface buoys, with or without clump-weights, have been designed and investigated experimentally. Tests in regular, irregular, and extreme waves for a moored model of the ISWEC device have been performed at the University of Naples Federico II. The aim is to identify a mooring solution that could guarantee both correct operation of the device and load carrying in extreme sea conditions. Pitch motion and loads in the rotational joint have been considered as indicators of the device hydrodynamic behavior and mooring configuration impact on the WEC

The Chambo restoration strategic plan

The Chambo (Oreochromis karongae, O. squamipinnis and O. lidole) fisheries are essential to the food security of the majority of Malawians and a lifeline for rural and urban economies. The chambo fisheries, however, have collapsed and urgent restoration is required. Successful restoration of the important chambo fisheries demands a careful analysis of the problem and formulation of a strategic plan to implement relevant activities that will result in effective interventions in the fisheries. These proceedings give information on the process of developing a strategic plan for the restoration of the chambo fisheries. The papers contained in these proceedings cover topics ranging from governance, policy, biology, ecology and socio-economics and, therefore, inform the reader of the scope of knowledge on the chambo, the socio-economic and livelihoods context within which the people exploiting the resource operate, and past constraints to the management of the chambo fisheries. The proceedings also contain recommendations on how to overcome the problems and a strategic plan for the restoration of the fisheries. It is hoped that the proceedings will emphasize to researchers in the natural and social sciences and development practitioners that a multidisciplinary approach is needed that puts the people utilizing the resource at the center of all activities involved if the chambo fisheries are to be successfully restoredFisheries, Fish culture, Fishery management, Resource conservation, Resource management, Malawi, Oreochromis karongae, Oreochromis squamipinnis, Oreochromis lidole

Design and Implement Towards Enhanced Physical Interactive Performance Robot Bodies

In this thesis, it will introduce the design principle and implement details towards enhanced physical interactive performance robot bodies, which are more specically focused on under actuated principle robotic hands and articulated leg robots. Since they both signicantly function as the physical interactive robot bodies against external environment, while their current performance can hardly satisfy the requirement of undertaking missions in real application. Regarding to the enhanced physical interactive performances, my work will emphasis on the three following specific functionalities, high energy efficiency, high strength and physical sturdiness in both robotics actuation and mechanism. For achieving the aforementioned targets, multiple design methods have been applied, rstly the elastic energy storage elements and compliant actuation have been adopted in legged robots as Asymmetrical Compliant Actuation (ACA), implemented for not only single joint but also multiple joints as mono and biarticulation congurations in order to achieve higher energy effciency motion. Secondly the under actuated principle and modular nger design concept have been utilized on the development of robotic hands for enhancing the grasping strength and physical sturdiness meanwhile maintaining the manipulation dexterity. Lastly, a novel high payload active tuning Parallel Elastic Actuation (PEA) and Series Elastic Actuation (SEA) have been adopted on legged robots for augmenting energy eciency and physical sturdiness. My thesis contribution relies on the novel design and implement of robotics bodies for enhancing physical interactive performance and we experimentally veried the design effectiveness in specic designed scenario and practical applications

Study of aerodynamic technology for single-cruise-engine VSTOL fighter/attack aircraft, phase 1

A conceptual design and analysis on a single engine VSTOL fighter/attack aircraft is completed. The aircraft combines a NASA/deHavilland ejector with vectored thrust and is capable of accomplishing the mission and point performance of type Specification 169, and a flight demonstrator could be built with an existing F101/DFE engine. The aerodynamic, aero/propulsive, and propulsive uncertainties are identified, and a wind tunnel program is proposed to address those uncertainties associated with wing borne flight

Wind Field and Trajectory Models for Tornado-Propelled Objects

A mathematical model to predict the trajectory of tornado born objects postulated to be in the vicinity of nuclear power plants is developed. An improved tornado wind field model satisfied the no slip ground boundary condition of fluid mechanics and includes the functional dependence of eddy viscosity with altitude. Subscale wind tunnel data are obtained for all of the missiles currently specified for nuclear plant design. Confirmatory full-scale data are obtained for a 12 inch pipe and automobile. The original six degree of freedom trajectory model is modified to include the improved wind field and increased capability as to body shapes and inertial characteristics that can be handled. The improved trajectory model is used to calculate maximum credible speeds, which for all of the heavy missiles are considerably less than those currently specified for design. Equivalent coefficients for use in three degree of freedom models are developed and the sensitivity of range and speed to various trajectory parameters for the 12 inch diameter pipe are examined

Walking Quadrupedal Platform

The goal of this project was to continue developing a functioning quadrupedal platform for the WPI robotics department. The quadruped is a forty-pound robot with four independently moving legs built by a previous MQP. This project consists of testing and implementing motion control systems. The primary goal of the project was to ensure that the robot quadrupedal chassis built by a previous MQP could move stably and intelligently so that it can be useful for future projects. Three main motion gaits were studied, a crawl gait, a walking gait, and a turning gait. The project implemented stable motion for the three gaits mentioned. In addition, the team also made significant system design improvements in the structure, electrical circuit, and code

On the Biomimetic Design of Agile-Robot Legs

The development of functional legged robots has encountered its limits in human-made actuation technology. This paper describes research on the biomimetic design of legs for agile quadrupeds. A biomimetic leg concept that extracts key principles from horse legs which are responsible for the agile and powerful locomotion of these animals is presented. The proposed biomimetic leg model defines the effective leg length, leg kinematics, limb mass distribution, actuator power, and elastic energy recovery as determinants of agile locomotion, and values for these five key elements are given. The transfer of the extracted principles to technological instantiations is analyzed in detail, considering the availability of current materials, structures and actuators. A real leg prototype has been developed following the biomimetic leg concept proposed. The actuation system is based on the hybrid use of series elasticity and magneto-rheological dampers which provides variable compliance for natural motion. From the experimental evaluation of this prototype, conclusions on the current technological barriers to achieve real functional legged robots to walk dynamically in agile locomotion are presented