Robust multivariable predictive control: how can it be applied to industrial test stands ?

To cope with recent technological evolutions of air conditioning systems for aircraft, the French Aeronautical Test Center built a new test stand for certification at ground level. The constraints specified by the industrial users of the process seemed antagonistic for many reasons. First, the controller had to be implemented on an industrial automaton, not adaptable to modern algorithms. Then the specified dynamic performances were very demanding, especially taking into account the wide operating ranges of the process. Finally, the proposed controller had to be easy for nonspecialist users to handle. Thus, the control design and implementation steps had to be conducted considering both theoretical and technical aspects. This finally led to the development of a new multivariable predictive controller, called alpha-MPC, whose main characteristic is the introduction of an extra tuning parameter alpha that has enhanced the overall control robustness. In particular, the H1-norm of the sensitivity functions can be significantly reduced by tuning this single new parameter. It turns out to be a simple but efficient way to improve the robustness of the initial algorithm. The other classical tuning parameters are still physically meaningful, as is usual with predictive techniques. The initial results are very promising and this controller has already been adopted by the industrial users as the basis of the control part for future developments of the test stand

Vibration suppression in multi-body systems by means of disturbance filter design methods

This paper addresses the problem of interaction in mechanical multi-body systems and shows that subsystem interaction can be considerably minimized while increasing performance if an efficient disturbance model is used. In order to illustrate the advantage of the proposed intelligent disturbance filter, two linear model based techniques are considered: IMC and the model based predictive (MPC) approach. As an illustrative example, multivariable mass-spring-damper and quarter car systems are presented. An adaptation mechanism is introduced to account for linear parameter varying LPV conditions. In this paper we show that, even if the IMC control strategy was not designed for MIMO systems, if a proper filter is used, IMC can successfully deal with disturbance rejection in a multivariable system, and the results obtained are comparable with those obtained by a MIMO predictive control approach. The results suggest that both methods perform equally well, with similar numerical complexity and implementation effort

Robust multivariable predictive control: Aplication to an industrial test stand

This paper reports a theoretical extension of Multivariable Predictive Control (MPC). The robustness of an augmented algorithm (alpha-MPC) for a general M-input N-output system is explored. It is shown that an extra parameter alpha in the criterion function can reduce the Hinf-norm of the multivariable sensitivity function, thus improving the disturbance-rejection properties of the closed loop system. This control law is finally applied to a test stand for air conditioning equipments of aircrafts with a great improvement of performances regarding the former regulation

Constrained dynamic control of traffic junctions

Excessive traffic in our urban environments has detrimental effects on our health, economy and standard of living. To mitigate this problem, an adaptive traffic lights signalling scheme is developed and tested in this paper. This scheme is based on a state space representation of traffic dynamics, controlled via a dynamic programme. To minimise implementation costs, only one loop detector is assumed at each link. The comparative advantages of the proposed system over optimal fixed time control are highlighted through an example. Results will demonstrate the flexibility of the system when applied to different junctions. Monte Carlo runs of the developed scheme highlight the consistency and repeatability of these results.peer-reviewe

Neural Modeling and Control of Diesel Engine with Pollution Constraints

The paper describes a neural approach for modelling and control of a turbocharged Diesel engine. A neural model, whose structure is mainly based on some physical equations describing the engine behaviour, is built for the rotation speed and the exhaust gas opacity. The model is composed of three interconnected neural submodels, each of them constituting a nonlinear multi-input single-output error model. The structural identification and the parameter estimation from data gathered on a real engine are described. The neural direct model is then used to determine a neural controller of the engine, in a specialized training scheme minimising a multivariable criterion. Simulations show the effect of the pollution constraint weighting on a trajectory tracking of the engine speed. Neural networks, which are flexible and parsimonious nonlinear black-box models, with universal approximation capabilities, can accurately describe or control complex nonlinear systems, with little a priori theoretical knowledge. The presented work extends optimal neuro-control to the multivariable case and shows the flexibility of neural optimisers. Considering the preliminary results, it appears that neural networks can be used as embedded models for engine control, to satisfy the more and more restricting pollutant emission legislation. Particularly, they are able to model nonlinear dynamics and outperform during transients the control schemes based on static mappings.Comment: 15 page

A survey of fuzzy control for stabilized platforms

This paper focusses on the application of fuzzy control techniques (fuzzy type-1 and type-2) and their hybrid forms (Hybrid adaptive fuzzy controller and fuzzy-PID controller) in the area of stabilized platforms. It represents an attempt to cover the basic principles and concepts of fuzzy control in stabilization and position control, with an outline of a number of recent applications used in advanced control of stabilized platform. Overall, in this survey we will make some comparisons with the classical control techniques such us PID control to demonstrate the advantages and disadvantages of the application of fuzzy control techniques

Nonminimal state space approach to multivariable ramp metering control of motorway bottlenecks

The paper discusses the automatic control of motorway traffic flows utilising ramp metering, i.e. traffic lights on the on-ramp entrances. A multivariable ramp metering system is developed, based on the nonminimal state space (NMSS) approach to control system design using adaptive proportional-integral-plus, linear quadratic (PIP–LQ) optimal controllers. The controller is evaluated on a nonlinear statistical traffic model (STM) simulation of the Amsterdam motorway ring road near the Coen Tunnel

Control optimization, stabilization and computer algorithms for aircraft applications

The analysis and design of complex multivariable reliable control systems are considered. High performance and fault tolerant aircraft systems are the objectives. A preliminary feasibility study of the design of a lateral control system for a VTOL aircraft that is to land on a DD963 class destroyer under high sea state conditions is provided. Progress in the following areas is summarized: (1) VTOL control system design studies; (2) robust multivariable control system synthesis; (3) adaptive control systems; (4) failure detection algorithms; and (5) fault tolerant optimal control theory

Space Structures: Issues in Dynamics and Control

A selective technical overview is presented on the vibration and control of large space structures, the analysis, design, and construction of which will require major technical contributions from the civil/structural, mechanical, and extended engineering communities. The immediacy of the U.S. space station makes the particular emphasis placed on large space structures and their control appropriate. The space station is but one part of the space program, and includes the lunar base, which the space station is to service. This paper attempts to summarize some of the key technical issues and hence provide a starting point for further involvement. The first half of this paper provides an introduction and overview of large space structures and their dynamics; the latter half discusses structural control, including control‐system design and nonlinearities. A crucial aspect of the large space structures problem is that dynamics and control must be considered simultaneously; the problems cannot be addressed individually and coupled as an afterthought