99 research outputs found
Rateless Coding for Gaussian Channels
A rateless code-i.e., a rate-compatible family of codes-has the property that
codewords of the higher rate codes are prefixes of those of the lower rate
ones. A perfect family of such codes is one in which each of the codes in the
family is capacity-achieving. We show by construction that perfect rateless
codes with low-complexity decoding algorithms exist for additive white Gaussian
noise channels. Our construction involves the use of layered encoding and
successive decoding, together with repetition using time-varying layer weights.
As an illustration of our framework, we design a practical three-rate code
family. We further construct rich sets of near-perfect rateless codes within
our architecture that require either significantly fewer layers or lower
complexity than their perfect counterparts. Variations of the basic
construction are also developed, including one for time-varying channels in
which there is no a priori stochastic model.Comment: 18 page
Reconfigurable rateless codes
We propose novel reconfigurable rateless codes, that are capable of not only varying the block length but also adaptively modify their encoding strategy by incrementally adjusting their degree distribution according to the prevalent channel conditions without the availability of the channel state information at the transmitter. In particular, we characterize a reconfigurable ratelesscode designed for the transmission of 9,500 information bits that achieves a performance, which is approximately 1 dB away from the discrete-input continuous-output memoryless channel’s (DCMC) capacity over a diverse range of channel signal-to-noise (SNR) ratios
Precoded Integer-Forcing Universally Achieves the MIMO Capacity to Within a Constant Gap
An open-loop single-user multiple-input multiple-output communication scheme
is considered where a transmitter, equipped with multiple antennas, encodes the
data into independent streams all taken from the same linear code. The coded
streams are then linearly precoded using the encoding matrix of a perfect
linear dispersion space-time code. At the receiver side, integer-forcing
equalization is applied, followed by standard single-stream decoding. It is
shown that this communication architecture achieves the capacity of any
Gaussian multiple-input multiple-output channel up to a gap that depends only
on the number of transmit antennas.Comment: to appear in the IEEE Transactions on Information Theor
A super-nyquist architecture for reliable underwater acoustic communication
A natural joint physical and link layer transmission architecture is developed for communication over underwater acoustic channels, based on the concept of super-Nyquist (SNQ) signaling. In such systems, the signaling rate is chosen significantly higher than the Nyquist rate of the system. We show that such signaling can be used in conjunction with good "off- the-shelf" base codes, simple linear redundancy, and minimum mean-square error decision feedback equalization (MMSE-DFE) to produce highly efficient, low complexity rateless (i.e., "fountain") codes for the severe time-varying intersymbol-interference channels typical of this application. We show that not only can SNQ rateless codes approach capacity arbitrarily closely, but even particularly simple SNQ-based rateless codes require the transmission of dramatically fewer packets than does traditional ARQ with Chase combining.United States. Office of Naval Research. Multidisciplinary University Research Initiative (Grant N00014-07-1-0738)United States. Air Force Office of Scientific Research (Grant FA9550-11-1-0183)Israel Science Foundation (Grant 1557/10
AirSync: Enabling Distributed Multiuser MIMO with Full Spatial Multiplexing
The enormous success of advanced wireless devices is pushing the demand for
higher wireless data rates. Denser spectrum reuse through the deployment of
more access points per square mile has the potential to successfully meet the
increasing demand for more bandwidth. In theory, the best approach to density
increase is via distributed multiuser MIMO, where several access points are
connected to a central server and operate as a large distributed multi-antenna
access point, ensuring that all transmitted signal power serves the purpose of
data transmission, rather than creating "interference." In practice, while
enterprise networks offer a natural setup in which distributed MIMO might be
possible, there are serious implementation difficulties, the primary one being
the need to eliminate phase and timing offsets between the jointly coordinated
access points.
In this paper we propose AirSync, a novel scheme which provides not only time
but also phase synchronization, thus enabling distributed MIMO with full
spatial multiplexing gains. AirSync locks the phase of all access points using
a common reference broadcasted over the air in conjunction with a Kalman filter
which closely tracks the phase drift. We have implemented AirSync as a digital
circuit in the FPGA of the WARP radio platform. Our experimental testbed,
comprised of two access points and two clients, shows that AirSync is able to
achieve phase synchronization within a few degrees, and allows the system to
nearly achieve the theoretical optimal multiplexing gain. We also discuss MAC
and higher layer aspects of a practical deployment. To the best of our
knowledge, AirSync offers the first ever realization of the full multiuser MIMO
gain, namely the ability to increase the number of wireless clients linearly
with the number of jointly coordinated access points, without reducing the per
client rate.Comment: Submitted to Transactions on Networkin
Near-capacity fixed-rate and rateless channel code constructions
Fixed-rate and rateless channel code constructions are designed for satisfying conflicting design tradeoffs, leading to codes that benefit from practical implementations, whilst offering a good bit error ratio (BER) and block error ratio (BLER) performance. More explicitly, two novel low-density parity-check code (LDPC) constructions are proposed; the first construction constitutes a family of quasi-cyclic protograph LDPC codes, which has a Vandermonde-like parity-check matrix (PCM). The second construction constitutes a specific class of protograph LDPC codes, which are termed as multilevel structured (MLS) LDPC codes. These codes possess a PCM construction that allows the coexistence of both pseudo-randomness as well as a structure requiring a reduced memory. More importantly, it is also demonstrated that these benefits accrue without any compromise in the attainable BER/BLER performance. We also present the novel concept of separating multiple users by means of user-specific channel codes, which is referred to as channel code division multiple access (CCDMA), and provide an example based on MLS LDPC codes. In particular, we circumvent the difficulty of having potentially high memory requirements, while ensuring that each user’s bits in the CCDMA system are equally protected. With regards to rateless channel coding, we propose a novel family of codes, which we refer to as reconfigurable rateless codes, that are capable of not only varying their code-rate but also to adaptively modify their encoding/decoding strategy according to the near-instantaneous channel conditions. We demonstrate that the proposed reconfigurable rateless codes are capable of shaping their own degree distribution according to the nearinstantaneous requirements imposed by the channel, but without any explicit channel knowledge at the transmitter. Additionally, a generalised transmit preprocessing aided closed-loop downlink multiple-input multiple-output (MIMO) system is presented, in which both the channel coding components as well as the linear transmit precoder exploit the knowledge of the channel state information (CSI). More explicitly, we embed a rateless code in a MIMO transmit preprocessing scheme, in order to attain near-capacity performance across a wide range of channel signal-to-ratios (SNRs), rather than only at a specific SNR. The performance of our scheme is further enhanced with the aid of a technique, referred to as pilot symbol assisted rateless (PSAR) coding, whereby a predetermined fraction of pilot bits is appropriately interspersed with the original information bits at the channel coding stage, instead of multiplexing pilots at the modulation stage, as in classic pilot symbol assisted modulation (PSAM). We subsequently demonstrate that the PSAR code-aided transmit preprocessing scheme succeeds in gleaning more information from the inserted pilots than the classic PSAM technique, because the pilot bits are not only useful for sounding the channel at the receiver but also beneficial for significantly reducing the computational complexity of the rateless channel decoder
Investigation of punctured LDPC codes and time-diversity on free-space optical links
In this paper, we analyze the behavior of DVB-S2 un-punctured/punctured low-density parity-check (LDPC) coded on-off-keying (OOK) under atmospheric turbulence conditions by utilizing time diversity. A performance characterization between these schemes is evaluated, where punctured LDPC code provides a penalty of around 0.1 to 0.2 dB against unpunctured LDPC codes but still provides a coding gain of several dB against uncoded OOK. The combination of channel coding and a bit interleaver results in performance improvements in turbulence conditions. For example, such a system can achieve a coding gain of 16.7 dB in moderate turbulence conditions compared to uncoded OOK
- …