The objectness of everyday life: disburdenment or engagement?

The article grew out of a conference paper, ‘The objectness of everyday life: engagement and disburdenment’, Material Geographies, UCL, September 2002. An expanded version of the paper was included in a special themed section of an issue of Geoforum. The paper intervenes into contemporary philosophical scholarship on the nature of use-value, usability, design and ethics. The article has been directly engaged with in an academic journal; Christensen, Carleton B. (2005) ‘The Material Basis of Everyday Rationality: transformation by design or education?’, Design Philosophy Papers No.4,)

SusOrganic - Development of quality standards and optimised processing methods for organic produce - Final report

The SusOrganic project aimed to develop improved drying and cooling/freezing processes for organic products in terms of sustainability and objective product quality criteria. Initially, the consortium focused on a predefined set products to investigate (fish, meat, fruits and vegetables). Contacting participants in the fruit and vegetable sector showed that there is only little perceived need for making changes for the improvement of the processes. At the same time, it became clear that hops and herb producers (drying) face several challenges in terms of product quality and cost of drying processes. Therefore, the range of products was extended to these products. The results of a consumer survey conducted as part the project showed clearly that consumers trust in the organic label, but also tend to mix up the term organic with regional or fair ­trade. Further, the primary production on farm and not the processing is explicitly included in the consumers’ evaluation of sustainability. Appearance of organic products was found to be one of the least important quality criteria or attributes regarding buying decisions. However, there are indications that an imperfect appearance could be a quality attribute for consumers, as the product then is perceived to be processed without artificial additives. Regarding drying operations, small scale producers in the organic sector often work with old and/or modified techniques and technologies, which often leads to an inefficient drying processes due to high energy consumptions and decreased product quality. Inappropriate air volume flow and distribution often cause inefficient removal of the moisture from the product and heterogeneous drying throughout the bulk. Guidelines for improvement of the physical setup of existing driers as well as designs for new drying operations, including novel drying strategies were developed. Besides chilling and freezing, the innovative idea of superchilling was included into the project.The superchilled cold chain is only a few degrees colder than the refrigeration chain but has a significant impact on the preservation characteristic due to shock frosting of the outer layer of the product and the further distribution of very small ice crystals throughout the product during storage. Super­chilling of organically grown salmon eliminated the demand of ice for transport, resulting in both, a reduction of energy costs and a better value chain performance in terms of carbon foot printing. This is mainly due to the significantly reduced transport volume and weight without the presence of ice. The product quality is not different but the shelf life is extended compared to chilled fish. This means that the high quality of organic salmon can be maintained over a longer time period, which can be helpful,e.g. to reach far distant markets. The same trend was found for superchilled organic meat products such as pork and chicken. The consortium also developed innovative noninvasive measurement and control systems and improved drying strategies and systems for fruits, vegetables, herbs, hops and meat. Those systems are based on changes occurring inside the product and therefore require observation strategies of the product during the drying process. Through auditing campaigns as well as pilot scale drying tests it has been possible to develop optimisation strategies for both herb and hops commodities, which can help reduce microbial spoilage and retain higher levels of volatile product components whilst reducing the energy demands. These results can be applied with modifications to the other commodities under investigation. The environmental and cost performance of superchilling of salmon and drying of meat, fruit and vegetables were also investigated and the findings indicated that both superchilling and drying could improve sustainability of organic food value chains especially in case of far distant markets. An additional outcome of the project, beyond the original scope was the development of a noninvasive, visual sensor based detection system for authenticity checks of meat products in terms of fresh and prefrozen meats

Understanding Digital Technology’s Evolution and the Path of Measured Productivity Growth: Present and Future in the Mirror of the Past

Three styles of explanation have been advanced by economists seeking to account for the so-called 'productivity paradox'. The coincidence of a persisting slowdown in the growth of measured total factor productivity (TFP) in the US, since the mid-1970's, with the wave of information technology (It) innovations, is said by some to be an illusion due to the mismeasurement of real output growth; by others to expose the mistaken expectations about the benefits of computerization; and by still others to reflect the amount of time, and the volume of intangible investments in 'learning', and the time required for ancillary innovations that allow the new digital technologies to be applied in ways that are reflected in measured productivity growth. This paper shows that rather than viewing these as competing hypotheses, the dynamics of the transition to a new technological and economic regime based upon a general purpose technology (GPT) should be understood to be likely to give rise to all three 'effects.' It more fully articulates and supports this thesis, which was first advanced in the 'computer and dynamo' papers by David (1990, 1991). The relevance of that historical experience is re-asserted and supported by further evidence rebutting skeptics who have argued that the diffusion of electrification and computerization have little in common. New evidence is produced about the links between IT use, mass customization, and the upward bias of output price deflators arising from the method used to 'chain in' new products prices. The measurement bias due to the exclusion of intangible investments from the scope of the official national product accounts also is examined. Further, it is argued that the development of the general-purpose PC delayed the re-organization of businesses along lines that would have more directly raised task productivity, even though the technologies yielded positive 'revenue productivity' gains for large companies. The paper concludes by indicating the emerging technical and organizational developments that are likely to deliver a sustained surge of measured TFP growth during the decades that lie immediately ahead.

Discontinuities in the Distribution of Great Wealth: Sectoral Forces Old and New

National surveys of household economics and well-being in the United States usually focus on income. In those income surveys with supplemental wealth modules, the very rich are underrepresented if not unrepresented. Typically, wealth data are truncated such that they do not afford a view of the extreme top of the distribution. Therefore, we attempt to supplement our knowledge about elite wealth holdings by compiling data on the richest individuals and families in the United States. To do so, we draw from the rosters of the "Forbes Four Hundred," which have been published annually by Forbes magazine since 1982. Along with information from other business press reports and standard biographical sources, rosters of the very rich enable research on inequality at the extreme of the wealth distribution during a period of dramatic change in the composition and concentration of wealth. In this study, we focus analytically on economic sectors because we are interested less in the maldistribution of wealth by demographic groups than in inequality between different economic sectors. We will first specify our analytical approach, then examine issues in the use of business press rosters of the very rich as a data source, and follow with a discussion of the dimensions and categories of our sector typology. After presenting our results, we will address how sectoral forces old and new affect economic opportunity and great wealth outcomes.

Internet of things

Manual of Digital Earth / Editors: Huadong Guo, Michael F. Goodchild, Alessandro Annoni .- Springer, 2020 .- ISBN: 978-981-32-9915-3Digital Earth was born with the aim of replicating the real world within the digital world. Many efforts have been made to observe and sense the Earth, both from space (remote sensing) and by using in situ sensors. Focusing on the latter, advances in Digital Earth have established vital bridges to exploit these sensors and their networks by taking location as a key element. The current era of connectivity envisions that everything is connected to everything. The concept of the Internet of Things(IoT)emergedasaholisticproposaltoenableanecosystemofvaried,heterogeneous networked objects and devices to speak to and interact with each other. To make the IoT ecosystem a reality, it is necessary to understand the electronic components, communication protocols, real-time analysis techniques, and the location of the objects and devices. The IoT ecosystem and the Digital Earth (DE) jointly form interrelated infrastructures for addressing today’s pressing issues and complex challenges. In this chapter, we explore the synergies and frictions in establishing an efficient and permanent collaboration between the two infrastructures, in order to adequately address multidisciplinary and increasingly complex real-world problems. Although there are still some pending issues, the identified synergies generate optimism for a true collaboration between the Internet of Things and the Digital Earth

Middleware Technologies for Cloud of Things - a survey

The next wave of communication and applications rely on the new services provided by Internet of Things which is becoming an important aspect in human and machines future. The IoT services are a key solution for providing smart environments in homes, buildings and cities. In the era of a massive number of connected things and objects with a high grow rate, several challenges have been raised such as management, aggregation and storage for big produced data. In order to tackle some of these issues, cloud computing emerged to IoT as Cloud of Things (CoT) which provides virtually unlimited cloud services to enhance the large scale IoT platforms. There are several factors to be considered in design and implementation of a CoT platform. One of the most important and challenging problems is the heterogeneity of different objects. This problem can be addressed by deploying suitable "Middleware". Middleware sits between things and applications that make a reliable platform for communication among things with different interfaces, operating systems, and architectures. The main aim of this paper is to study the middleware technologies for CoT. Toward this end, we first present the main features and characteristics of middlewares. Next we study different architecture styles and service domains. Then we presents several middlewares that are suitable for CoT based platforms and lastly a list of current challenges and issues in design of CoT based middlewares is discussed.Comment: http://www.sciencedirect.com/science/article/pii/S2352864817301268, Digital Communications and Networks, Elsevier (2017

Middleware Technologies for Cloud of Things - a survey

The next wave of communication and applications rely on the new services provided by Internet of Things which is becoming an important aspect in human and machines future. The IoT services are a key solution for providing smart environments in homes, buildings and cities. In the era of a massive number of connected things and objects with a high grow rate, several challenges have been raised such as management, aggregation and storage for big produced data. In order to tackle some of these issues, cloud computing emerged to IoT as Cloud of Things (CoT) which provides virtually unlimited cloud services to enhance the large scale IoT platforms. There are several factors to be considered in design and implementation of a CoT platform. One of the most important and challenging problems is the heterogeneity of different objects. This problem can be addressed by deploying suitable "Middleware". Middleware sits between things and applications that make a reliable platform for communication among things with different interfaces, operating systems, and architectures. The main aim of this paper is to study the middleware technologies for CoT. Toward this end, we first present the main features and characteristics of middlewares. Next we study different architecture styles and service domains. Then we presents several middlewares that are suitable for CoT based platforms and lastly a list of current challenges and issues in design of CoT based middlewares is discussed.Comment: http://www.sciencedirect.com/science/article/pii/S2352864817301268, Digital Communications and Networks, Elsevier (2017

Optical techniques for 3D surface reconstruction in computer-assisted laparoscopic surgery

One of the main challenges for computer-assisted surgery (CAS) is to determine the intra-opera- tive morphology and motion of soft-tissues. This information is prerequisite to the registration of multi-modal patient-specific data for enhancing the surgeon’s navigation capabilites by observ- ing beyond exposed tissue surfaces and for providing intelligent control of robotic-assisted in- struments. In minimally invasive surgery (MIS), optical techniques are an increasingly attractive approach for in vivo 3D reconstruction of the soft-tissue surface geometry. This paper reviews the state-of-the-art methods for optical intra-operative 3D reconstruction in laparoscopic surgery and discusses the technical challenges and future perspectives towards clinical translation. With the recent paradigm shift of surgical practice towards MIS and new developments in 3D opti- cal imaging, this is a timely discussion about technologies that could facilitate complex CAS procedures in dynamic and deformable anatomical regions