Software Defined Applications in Cellular and Optical Networks

abstract: Small wireless cells have the potential to overcome bottlenecks in wireless access through the sharing of spectrum resources. A novel access backhaul network architecture based on a Smart Gateway (Sm-GW) between the small cell base stations, e.g., LTE eNBs, and the conventional backhaul gateways, e.g., LTE Servicing/Packet Gateways (S/P-GWs) has been introduced to address the bottleneck. The Sm-GW flexibly schedules uplink transmissions for the eNBs. Based on software defined networking (SDN) a management mechanism that allows multiple operator to flexibly inter-operate via multiple Sm-GWs with a multitude of small cells has been proposed. This dissertation also comprehensively survey the studies that examine the SDN paradigm in optical networks. Along with the PHY functional split improvements, the performance of Distributed Converged Cable Access Platform (DCCAP) in the cable architectures especially for the Remote-PHY and Remote-MACPHY nodes has been evaluated. In the PHY functional split, in addition to the re-use of infrastructure with a common FFT module for multiple technologies, a novel cross functional split interaction to cache the repetitive QAM symbols across time at the remote node to reduce the transmission rate requirement of the fronthaul link has been proposed.Dissertation/ThesisDoctoral Dissertation Electrical Engineering 201

An Efficient DOCSIS Upstream Equalizer

The advancement in the CATV industry has been remarkable. In the beginning, CATV provided a few television channels. Now it provides a variety of advanced services such as video on demand (VOD), Internet access, Pay-Per-View on demand and interactive TV. These advances have increased the popularity of CATV manyfold. Current improvements focus on interactive services with high quality. These interactive services require more upstream (transmission from customer premises to cable operator premises) channel bandwidth. The flow of data through the CATV network in both the upstream and downstream directions is governed by a standard referred to as the Data Over Cable Service Interface Specification (DOCSIS) standard. The latest version is DOCSIS 3.1, which was released in January 2014. The previous version, DOCSIS 3.0, was released in 2006. One component of the upstream communication link is the QAM demodulator. An important component in the QAM demodulator is the equalizer, whose purpose is to remove distortion caused by the imperfect upstream channel as well as the residual timing offset and frequency offset. Most of the timing and frequency offset are corrected by timing and frequency recovery circuits; what remains is referred to as offset. A DOCSIS receiver, and hence the equalizer within, can be implemented with ASIC or FPGA technology. Implementing an equalizer in an ASIC has a large nonrecurring engineering cost, but relatively small per chip production cost. Implementing equalizer in an FPGA has very low non-recurring cost, but a relatively high per chip cost. If the choice technology was based on cost, one would think it would depends only on the volume, but in practice that is not the case. The dominant factor when it comes to profit, is the time-to-market, which makes FPGA technology the only choice. The goal of this thesis is to design a cost optimized equalizer for DOCSIS upstream demodulator and implement in an FPGA. With this in mind, an important objective is to establish a relationship between the equalizer’s critical parameters and its performance. The parameter-performance relationship that has been established in this study revealed that equalizer step size and length parameters should be 1/64 and approximately 20 to yield a near optimum equalizer when considering the MER-convergence time trade-off. In the pursuit of the objective another relationship was established that is useful in determining the accuracy of the timing recovery circuit. That relationship establishes the sensitivity both of the MER and convergence time to timing offset. The equalizer algorithm was implemented in a cost effective manner using DSP Builder. The effort to minimize cost was focused on minimizing the number of multipliers. It is shown that the equalizer can be constructed with 8 multipliers when the proposed time sharing algorithm is implemented

Design and Performance Analysis of Functional Split in Virtualized Access Networks

abstract: Emerging modular cable network architectures distribute some cable headend functions to remote nodes that are located close to the broadcast cable links reaching the cable modems (CMs) in the subscriber homes and businesses. In the Remote- PHY (R-PHY) architecture, a Remote PHY Device (RPD) conducts the physical layer processing for the analog cable transmissions, while the headend runs the DOCSIS medium access control (MAC) for the upstream transmissions of the distributed CMs over the shared cable link. In contrast, in the Remote MACPHY (R-MACPHY) ar- chitecture, a Remote MACPHY Device (RMD) conducts both the physical and MAC layer processing. The dissertation objective is to conduct a comprehensive perfor- mance comparison of the R-PHY and R-MACPHY architectures. Also, development of analytical delay models for the polling-based MAC with Gated bandwidth alloca- tion of Poisson traffic in the R-PHY and R-MACPHY architectures and conducting extensive simulations to assess the accuracy of the analytical model and to evaluate the delay-throughput performance of the R-PHY and R-MACPHY architectures for a wide range of deployment and operating scenarios. Performance evaluations ex- tend to the use of Ethernet Passive Optical Network (EPON) as transport network between remote nodes and headend. The results show that for long CIN distances above 100 miles, the R-MACPHY architecture achieves significantly shorter mean up- stream packet delays than the R-PHY architecture, especially for bursty traffic. The extensive comparative R-PHY and R-MACPHY comparative evaluation can serve as a basis for the planning of modular broadcast cable based access networks.Dissertation/ThesisDoctoral Dissertation Electrical Engineering 201

TRANSMISSION PERFORMANCE OPTIMIZATION IN FIBER-WIRELESS ACCESS NETWORKS USING MACHINE LEARNING TECHNIQUES

The objective of this dissertation is to enhance the transmission performance in the fiber-wireless access network through mitigating the vital system limitations of both analog radio over fiber (A-RoF) and digital radio over fiber (D-RoF), with machine learning techniques being systematically implemented. The first thrust is improving the spectral efficiency for the optical transmission in the D-RoF to support the delivery of the massive number of bits from digitized radio signals. Advanced digital modulation schemes like PAM8, discrete multi-tone (DMT), and probabilistic shaping are investigated and implemented, while they may introduce severe nonlinear impairments on the low-cost optical intensity-modulation-direct-detection (IMDD) based D-RoF link with a limited dynamic range. An efficient deep neural network (DNN) equalizer/decoder to mitigate the nonlinear degradation is therefore designed and experimentally verified. Besides, we design a neural network based digital predistortion (DPD) to mitigate the nonlinear impairments from the whole link, which can be integrated into a transmitter with more processing resources and power than a receiver in an access network. Another thrust is to proactively mitigate the complex interferences in radio access networks (RANs). The composition of signals from different licensed systems and unlicensed transmitters creates an unprecedently complex interference environment that cannot be solved by conventional pre-defined network planning. In response to the challenges, a proactive interference avoidance scheme using reinforcement learning is proposed and experimentally verified in a mmWave-over-fiber platform. Except for the external sources, the interference may arise internally from a local transmitter as the self-interference (SI) that occupies the same time and frequency block as the signal of interest (SOI). Different from the conventional subtraction-based SI cancellation scheme, we design an efficient dual-inputs DNN (DI-DNN) based canceller which simultaneously cancels the SI and recovers the SOI.Ph.D

University of Maine Connection to the vBNS

This award is made under the high performance connections portion of ANIR\u27s Connections to the Internet announcement, NSF 96-64. It provides partial support for two years for a DS-3 connection to the vBNS. Applications include projects in artificial intelligence and underwater vehicle research, wood science anf forest engineering, tribology, ceramic film characterization, insect population dynamics, digital libraries, conflict and violence, and oceanography. Collaborating institutions include the Naval Postgraduate School; Pennsylvania State University; University of New Hampshire; Brookhaven, Argonne and Oak Ridge National Labs; Naval Research Lab; University of Illinois; Naval Undersea Weapons Center; University of California - Santa Barbara; Woods Hole; Dartmouth; Bedford Institute of Oceanography; several European institutions; Oregon State University; University of Rhode Island; and Goddard Space Flight Center. For additional information: http://homeland.maine.edu

Alternate high speed network access for the last mile

Existing copper wire infrastructure no longer provides the required bandwidth for today's bandwidth -intense Internet applications. Homes and businesses in the last mile require the same access speeds offer by fiber optic cables. It is however, economically infeasible to bring fiber optic cable to each and every house and business in t he last mile. Free Space Optics and IEEE 802.11 are two technologies that offer high -speed capability and are potential last mile network access option. Free Space Optics uses lasers and IEEE 802.11 uses radio waves to send large amounts of data from one place to another. Both are wireless and uses license-free frequency band for transmission. Both are quickly deployable, easily scalable and cheaper to install and upgrade compared to wired infrastructures. These characteristics support applications that require high bandwidth and high degree of mobility, which are common in the military and civil networks. This thesis addresses the last mile problem and the current available access technologies which are unable to provide a high speed solution. Free Space Optics and IEEE 802.11 wireless technologies are explored and applied to a fictitious city for an economic analysis as possible high-speed network access method.http://archive.org/details/alternatehighspe109453616Captain, Singapore ArmyApproved for public release; distribution is unlimited