LIS: Localization based on an intelligent distributed fuzzy system applied to a WSN

The localization of the sensor nodes is a fundamental problem in wireless sensor networks. There are a lot of different kinds of solutions in the literature. Some of them use external devices like GPS, while others use special hardware or implicit parameters in wireless communications. In applications like wildlife localization in a natural environment, where the power available and the weight are big restrictions, the use of hungry energy devices like GPS or hardware that add extra weight like mobile directional antenna is not a good solution. Due to these reasons it would be better to use the localization’s implicit characteristics in communications, such as connectivity, number of hops or RSSI. The measurement related to these parameters are currently integrated in most radio devices. These measurement techniques are based on the beacons’ transmissions between the devices. In the current study, a novel tracking distributed method, called LIS, for localization of the sensor nodes using moving devices in a network of static nodes, which have no additional hardware requirements is proposed. The position is obtained with the combination of two algorithms; one based on a local node using a fuzzy system to obtain a partial solution and the other based on a centralized method which merges all the partial solutions. The centralized algorithm is based on the calculation of the centroid of the partial solutions. Advantages of using fuzzy system versus the classical Centroid Localization (CL) algorithm without fuzzy preprocessing are compared with an ad hoc simulator made for testing localization algorithms. With this simulator, it is demonstrated that the proposed method obtains less localization errors and better accuracy than the centroid algorithm.Junta de Andalucía P07-TIC-0247

Locating sensors with fuzzy logic algorithms

In a system formed by hundreds of sensors deployed in a huge area it is important to know the position where every sensor is. This information can be obtained using several methods. However, if the number of sensors is high and the deployment is based on ad-hoc manner, some auto-locating techniques must be implemented. In this paper we describe a novel algorithm based on fuzzy logic with the objective of estimating the location of sensors according to the knowledge of the position of some reference nodes. This algorithm, called LIS (Localization based on Intelligent Sensors) is executed distributively along a wireless sensor network formed by hundreds of nodes, covering a huge area. The evaluation of LIS is led by simulation tests. The result obtained shows that LIS is a promising method that can easily solve the problem of knowing where the sensors are located.Junta de Andalucía P07-TIC-0247

Distance Measurement-Based Cooperative Source Localization: A Convex Range-Free Approach

One of the most essential objectives in WSNs is to determine the spatial coordinates of a source or a sensor node having information. In this study, the problem of range measurement-based localization of a signal source or a sensor is revisited. The main challenge of the problem results from the non-convexity associated with range measurements calculated using the distances from the set of nodes with known positions to a xed sen- sor node. Such measurements corresponding to certain distances are non-convex in two and three dimensions. Attempts recently proposed in the literature to eliminate the non- convexity approach the problem as a non-convex geometric minimization problem, using techniques to handle the non-convexity. This study proposes a new fuzzy range-free sensor localization method. The method suggests using some notions of Euclidean geometry to convert the problem into a convex geometric problem. The convex equivalent problem is built using convex fuzzy sets, thus avoiding multiple stable local minima issues, then a gradient based localization algorithm is chosen to solve the problem. Next, the proposed algorithm is simulated considering various scenarios, including the number of available source nodes, fuzzi cation level, and area coverage. The results are compared with an algorithm having similar fuzzy logic settings. Also, the behaviour of both algorithms with noisy measurements are discussed. Finally, future extensions of the algorithm are suggested, along with some guidelines

Fuzzy Mobile-Robot Positioning in Intelligent Spaces Using Wireless Sensor Networks

This work presents the development and experimental evaluation of a method based on fuzzy logic to locate mobile robots in an Intelligent Space using Wireless Sensor Networks (WSNs). The problem consists of locating a mobile node using only inter-node range measurements, which are estimated by radio frequency signal strength attenuation. The sensor model of these measurements is very noisy and unreliable. The proposed method makes use of fuzzy logic for modeling and dealing with such uncertain information. Besides, the proposed approach is compared with a probabilistic technique showing that the fuzzy approach is able to handle highly uncertain situations that are difficult to manage by well-known localization methods

Automatic triangulation positioning system for wide area coverage from a fixed sensors network

This thesis was submitted for the award of Doctor of Philosophy and was awarded by Brunel University LondonIn a wide area that many Transmitters (TRs) operate, systems of Fixed Sensors (FS) might be used in order to detect them and find TRs position. The detection and the accurate location of a new TR entering in the area frequently can be missed if the system fails to triangulate accurately the relative readings and analyze the changes in the received data. Additionally, there are cases that a Triangulation Station Network (TSN) can detect the heading as well as the transmitter’s position wrong. This thesis presents the design of a Sensors Network (FSN) system which is able to interact with a user, and exploit the relative data of the Sensors (SRs) in real time. The system performs localization with triangulation and the SRs are detect only TRs bearing data (range free). System design and algorithms are also explained. Efficient algorithms were elaborated and the outcomes of their implementation were calculated. The system design targets to reduce system errors and increase the accuracy and the speed of detection. Synchronously and through interaction with the user and changes of relative settings and parameters will be able to offer the user accurate results on localization of TRs in the area minimizing false readings and False Triangulations (FTRNs). The system also enables the user to apply optimization techniques in order to increase the system detection rate and performance and keep the surveillance in the Field of Interest (FoI) on a high level. The optimization methodology applied for the system proves that the FSN system is able to operate with a high performance even when saturation phenomena appear. The unique outcome of the research conducted, is that this thesis paves the way to enhance the localization via Triangulation for a network of Fixed Sensors with known position. The value of this thesis is that the FSN system performs bearing only detection (Range free) with a certain accuracy and the Area of Interest (AOI) is covered efficiently

A Multi-hop Topology Control Based on Inter-node Range Measurement for Wireless Sensor Networks Node Localization

In centralized range-based localization techniques, sufficiency of inter-node range information received by the base station strongly affects node position estimation results. Successful data aggregation is influenced by link stability of each connection of routes, especially in a multi-hop topology model. In general, measuring the inter-node range is only performed for position determination purposes. This research introduces the use of inter-node range measurement information for link selection in a multi-hop route composition in order to increase the rate of data aggregation. Due to irregularity problems of wireless media, two areas of node communication have been considered. The regular communication area is the area in which other nodes are able to perform symmetrical communication to the node without failure. The irregular area is the area in which other nodes are seldom able to communicate. Due to its instability, some existing methods tried to avoid the irregular area completely. The proposed method, named Virtual Boundaries (VBs) prioritizes these areas. The regular communication area’s nodes have high priority to be selected as link vertices; however, when there is no link candidate inside this area, nodes within the irregular area will be selected with respect to their range to the parent node. This technique resulted in a more robust multi-hop topology that can reduce isolated node numbers and increase the percentage of data collected by the base station accordingly