The Fundamentals of Radar with Applications to Autonomous Vehicles

Radar systems can be extremely useful for applications in autonomous vehicles. This paper seeks to show how radar systems function and how they can apply to improve autonomous vehicles. First, the basics of radar systems are presented to introduce the basic terminology involved with radar. Then, the topic of phased arrays is presented because of their application to autonomous vehicles. The topic of digital signal processing is also discussed because of its importance for all modern radar systems. Finally, examples of radar systems based on the presented knowledge are discussed to illustrate the effectiveness of radar systems in autonomous vehicles

FMCW Signals for Radar Imaging and Channel Sounding

A linear / stepped frequency modulated continuous wave (FMCW) signal has for a long time been used in radar and channel sounding. A novel FMCW waveform known as “Gated FMCW” signal is proposed in this thesis for the suppression of strong undesired signals in microwave radar applications, such as: through-the-wall, ground penetrating, and medical imaging radar. In these applications the crosstalk signal between antennas and the reflections form the early interface (wall, ground surface, or skin respectively) are much stronger in magnitude compared to the backscattered signal from the target. Consequently, if not suppressed they overshadow the target’s return making detection a difficult task. Moreover, these strong unwanted reflections limit the radar’s dynamic range and might saturate or block the receiver causing the reflection from actual targets (especially targets with low radar cross section) to appear as noise. The effectiveness of the proposed waveform as a suppression technique was investigated in various radar scenarios, through numerical simulations and experiments. Comparisons of the radar images obtained for the radar system operating with the standard linear FMCW signal and with the proposed Gated FMCW waveform are also made. In addition to the radar work the application of FMCW signals to radio propagation measurements and channel characterisation in the 60 GHz and 2-6 GHz frequency bands in indoor and outdoor environments is described. The data are used to predict the bit error rate performance of the in-house built measurement based channel simulator and the results are compared with the theoretical multipath channel simulator available in Matlab

A Miniaturized Low Power Millimeter Wave RFID tag for Spatial Localization and Detection

The work outlined in this thesis investigates the applicability of millimeter wave semi-passive backscatter nodes for use in the spatial localization and tracking of objects at short distances. A miniaturized semi-passive ultra-low power energy autonomous RFID tag operating in the 24 GHz ISM frequency band is developed. The spatial localization of the RFID tags is enabled by the use of a Frequency Modulated Continuous Wave (FMCW) Radar as the reader. The radar is used to resolve the modulated backscatter returned by the RFID tags when interrogated by a Continuous Wave from the reader.M.S

An FPGA-based 77 GHzs RADAR signal processing system for automotive collision avoidance

An FPGA implementable Verilog HDL based signal processing algorithm has been developed to detect the range and velocity of target vehicles using a MEMS based 77 GHz LFMCW long range automotive radar. The algorithm generates a tuning voltage to control a GaAs based VCO to produce a triangular chirp signal, controls the operation of MEMS components, and finally processes the IF signal to determine the range and veolicty of the detected targets. The Verilog HDL code has been developed targeting the Xilinx Virtex-5 SX50T FPGA. The developed algorithm enables the MEMS radar to detect 24 targets in an optimum timespan of 6.42 ms in the range of 0.4 to 200 m with a range resolution of 0.19 m and a maximum range error 0.25 m. A maximum relative velocity of ±300 km/h can be determined with a velocity resolution in HDL of 0.95 m/s and a maximum velocity error of 0.83 m/s with a sweep duration of 1 ms

Data Logging System for a Synthetic Aperture Radar Unit

A small, existing radar unit lacked the ability to automatically store the data it was receiving, which made its use clunky and cumbersome. A system was constructed to allow an on-board microprocessor to track distance traveled, and automatically store the data output from the radar unit to a portable memory unit for later data processing. Distance traveled is determined using a specially designed mobile cart, which electronically converts the rotation of a wheel into an electrical signal while also providing stability for taking accurate radar measurements. The output data from the radar unit is stored as a properly-formatted sound file to allow for immediate data analysis

Concepts for Short Range Millimeter-wave Miniaturized Radar Systems with Built-in Self-Test

This work explores short-range millimeter wave radar systems, with emphasis on miniaturization and overall system cost reduction. The designing and implementation processes, starting from the system level design considerations and characterization of the individual components to final implementation of the proposed architecture are described briefly. Several D-band radar systems are developed and their functionality and performances are demonstrated

Through-The-Wall Detection Using Ultra Wide Band Frequency Modulated Interrupted Continuous Wave Signals

Through-The-Wall-Detection (TTWD) techniques can improve the situational awareness of police and soldiers, and support first responders in search and rescue operations. A variety of systems for TTWD based on different waveforms have been developed and presented in the literature, e.g. radar systems based on pulses, noise or pseudo-noise waveforms, and frequency modulated continuous wave (FMCW) or stepped frequency continuous wave (SFCW) waveforms. Ultra wide band signals are normally used as they provide suitable resolution to discriminate different targets. A common problem for active radar systems for TTWD is the strong backscattered signal from the air-wall interface. This undesired signal can overshadow the reflections from actual targets, especially those with low radar cross section like human beings, and limit the dynamic range at the receiver, which could be saturated and blocked. Although several techniques have been developed to address this problem, frequency modulated interrupted continuous wave (FMICW) waveforms represent an interesting further approach to wall removal, which can be used as an alternative technique or combined with the existing ones. FMICW waveforms have been used in the past for ionospheric and ocean sensing radar systems, but their application to the wall removal problem in TTWD scenarios is novel. The validation of the effectiveness of the proposed FMICW waveforms as wall removal technique is therefore the primary objective of this thesis, focusing on comparing simulated and experimental results using normal FMCW waveforms and using the proposed FMICW waveforms. Initially, numerical simulations of realistic scenarios for TTWD have been run and FMICW waveforms have been successfully tested for different materials and internal structure of the wall separating the radar system and the targets. Then a radar system capable of generating FMICW waveforms has been designed and built to perform a measurement campaign in environments of the School of Engineering and Computing Sciences, Durham University. These tests aimed at the localization of stationary targets and at the detection of people behind walls. FMICW waveforms prove to be effective in removing/mitigating the undesired return caused by antenna cross-talk and wall reflections, thus enhancing the detection of targets

Signal Identification and Entrainment for Practical FMCW Radar Spoofing Attacks

This paper proposes a method of passively estimating the parameters of frequency-modulated-continuous-wave (FMCW) radar signals with a wide range of structural parameter values and analyzes how a malicious actor could employ such estimates to track and spoof a target radar. When radars are implemented to support automated driver assistance systems, an intelligent spoofer has the potential to substantially disrupt safe navigation by inducing its target to perceive false objects. Such a spoofer must acquire highly accurate estimates of the target radar's chirp sweep, timing, and frequency parameters while additionally tracking and compensating for time and Doppler shifts due to clock errors and relative movement. This is a difficult task for millimeter-wave radars due to severe Doppler shifts and fast sweep rates, especially when the spoofer uses off-the-shelf FMCW equipment. Algorithms and techniques for acquiring and tracking an FMCW radar are proposed and verified through simulation, which will help guide future decisions on appropriate radar spoofing countermeasures