Optically-Connected Memory: Architectures and Experimental Characterizations

Growing demands on future data centers and high-performance computing systems are driving the development of processor-memory interconnects with greater performance and flexibility than can be provided by existing electronic interconnects. A redesign of the systems' memory devices and architectures will be essential to enabling high-bandwidth, low-latency, resilient, energy-efficient memory systems that can meet the challenges of exascale systems and beyond. By leveraging an optics-based approach, this thesis presents the design and implementation of an optically-connected memory system that exploits both the bandwidth density and distance-independent energy dissipation of photonic transceivers, in combination with the flexibility and scalability offered by optical networks. By replacing the electronic memory bus with an optical interconnection network, novel memory architectures can be created that are otherwise infeasible. With remote optically-connected memory nodes accessible to processors as if they are local, programming models can be designed to utilize and efficiently share greater amounts of data. Processors that would otherwise be idle, being starved for data while waiting for scarce memory resources, can instead operate at high utilizations, leading to drastic improvements in the overall system performance. This work presents a prototype optically-connected memory module and a custom processor-based optical-network-aware memory controller that communicate transparently and all-optically across an optical interconnection network. The memory modules and controller are optimized to facilitate memory accesses across the optical network using a packet-switched, circuit-switched, or hybrid packet-and-circuit-switched approach. The novel memory controller is experimentally demonstrated to be compatible with existing processor-memory access protocols, with the memory controller acting as the optics-computing interface to render the optical network transparent. Additionally, the flexibility of the optical network enables additional performance benefits including increased memory bandwidth through optical multicasting. This optically-connected architecture can further enable more resilient memory system realizations by expanding on current error dectection and correction memory protocols. The integration of optics with memory technology constitutes a critical step for both optics and computing. The scalability challenges facing main memory systems today, especially concerning bandwidth and power consumption, complement well with the strengths of optical communications-based systems. Additionally, ongoing efforts focused on developing low-cost optical components and subsystems that are suitable for computing environments may benefit from the high-volume memory market. This work therefore takes the first step in merging the areas of optics and memory, developing the necessary architectures and protocols to interface the two technologies, and demonstrating potential benefits while identifying areas for future work. Future computing systems will undoubtedly benefit from this work through the deployment of high-performance, flexible, energy-efficient optically-connected memory architectures

From FPGA to ASIC: A RISC-V processor experience

This work document a correct design flow using these tools in the Lagarto RISC- V Processor and the RTL design considerations that must be taken into account, to move from a design for FPGA to design for ASIC

Cross-Layer Pathfinding for Off-Chip Interconnects

Off-chip interconnects for integrated circuits (ICs) today induce a diverse design space, spanning many different applications that require transmission of data at various bandwidths, latencies and link lengths. Off-chip interconnect design solutions are also variously sensitive to system performance, power and cost metrics, while also having a strong impact on these metrics. The costs associated with off-chip interconnects include die area, package (PKG) and printed circuit board (PCB) area, technology and bill of materials (BOM). Choices made regarding off-chip interconnects are fundamental to product definition, architecture, design implementation and technology enablement. Given their cross-layer impact, it is imperative that a cross-layer approach be employed to architect and analyze off-chip interconnects up front, so that a top-down design flow can comprehend the cross-layer impacts and correctly assess the system performance, power and cost tradeoffs for off-chip interconnects. Chip architects are not exposed to all the tradeoffs at the physical and circuit implementation or technology layers, and often lack the tools to accurately assess off-chip interconnects. Furthermore, the collaterals needed for a detailed analysis are often lacking when the chip is architected; these include circuit design and layout, PKG and PCB layout, and physical floorplan and implementation. To address the need for a framework that enables architects to assess the system-level impact of off-chip interconnects, this thesis presents power-area-timing (PAT) models for off-chip interconnects, optimization and planning tools with the appropriate abstraction using these PAT models, and die/PKG/PCB co-design methods that help expose the off-chip interconnect cross-layer metrics to the die/PKG/PCB design flows. Together, these models, tools and methods enable cross-layer optimization that allows for a top-down definition and exploration of the design space and helps converge on the correct off-chip interconnect implementation and technology choice. The tools presented cover off-chip memory interfaces for mobile and server products, silicon photonic interfaces, 2.5D silicon interposers and 3D through-silicon vias (TSVs). The goal of the cross-layer framework is to assess the key metrics of the interconnect (such as timing, latency, active/idle/sleep power, and area/cost) at an appropriate level of abstraction by being able to do this across layers of the design flow. In additional to signal interconnect, this thesis also explores the need for such cross-layer pathfinding for power distribution networks (PDN), where the system-on-chip (SoC) floorplan and pinmap must be optimized before the collateral layouts for PDN analysis are ready. Altogether, the developed cross-layer pathfinding methodology for off-chip interconnects enables more rapid and thorough exploration of a vast design space of off-chip parallel and serial links, inter-die and inter-chiplet links and silicon photonics. Such exploration will pave the way for off-chip interconnect technology enablement that is optimized for system needs. The basis of the framework can be extended to cover other interconnect technology as well, since it fundamentally relates to system-level metrics that are common to all off-chip interconnects

Novel Multicarrier Memory Channel Architecture Using Microwave Interconnects: Alleviating the Memory Wall

abstract: The increase in computing power has simultaneously increased the demand for input/output (I/O) bandwidth. Unfortunately, the speed of I/O and memory interconnects have not kept pace. Thus, processor-based systems are I/O and interconnect limited. The memory aggregated bandwidth is not scaling fast enough to keep up with increasing bandwidth demands. The term "memory wall" has been coined to describe this phenomenon. A new memory bus concept that has the potential to push double data rate (DDR) memory speed to 30 Gbit/s is presented. We propose to map the conventional DDR bus to a microwave link using a multicarrier frequency division multiplexing scheme. The memory bus is formed using a microwave signal carried within a waveguide. We call this approach multicarrier memory channel architecture (MCMCA). In MCMCA, each memory signal is modulated onto an RF carrier using 64-QAM format or higher. The carriers are then routed using substrate integrated waveguide (SIW) interconnects. At the receiver, the memory signals are demodulated and then delivered to SDRAM devices. We pioneered the usage of SIW as memory channel interconnects and demonstrated that it alleviates the memory bandwidth bottleneck. We demonstrated SIW performance superiority over conventional transmission line in immunity to cross-talk and electromagnetic interference. We developed a methodology based on design of experiment (DOE) and response surface method techniques that optimizes the design of SIW interconnects and minimizes its performance fluctuations under material and manufacturing variations. Along with using SIW, we implemented a multicarrier architecture which enabled the aggregated DDR bandwidth to reach 30 Gbit/s. We developed an end-to-end system model in Simulink and demonstrated the MCMCA performance for ultra-high throughput memory channel. Experimental characterization of the new channel shows that by using judicious frequency division multiplexing, as few as one SIW interconnect is sufficient to transmit the 64 DDR bits. Overall aggregated bus data rate achieves 240 GBytes/s data transfer with EVM not exceeding 2.26% and phase error of 1.07 degree or less.Dissertation/ThesisDoctoral Dissertation Electrical Engineering 201

DRAM Bender: An Extensible and Versatile FPGA-based Infrastructure to Easily Test State-of-the-art DRAM Chips

To understand and improve DRAM performance, reliability, security and energy efficiency, prior works study characteristics of commodity DRAM chips. Unfortunately, state-of-the-art open source infrastructures capable of conducting such studies are obsolete, poorly supported, or difficult to use, or their inflexibility limit the types of studies they can conduct. We propose DRAM Bender, a new FPGA-based infrastructure that enables experimental studies on state-of-the-art DRAM chips. DRAM Bender offers three key features at the same time. First, DRAM Bender enables directly interfacing with a DRAM chip through its low-level interface. This allows users to issue DRAM commands in arbitrary order and with finer-grained time intervals compared to other open source infrastructures. Second, DRAM Bender exposes easy-to-use C++ and Python programming interfaces, allowing users to quickly and easily develop different types of DRAM experiments. Third, DRAM Bender is easily extensible. The modular design of DRAM Bender allows extending it to (i) support existing and emerging DRAM interfaces, and (ii) run on new commercial or custom FPGA boards with little effort. To demonstrate that DRAM Bender is a versatile infrastructure, we conduct three case studies, two of which lead to new observations about the DRAM RowHammer vulnerability. In particular, we show that data patterns supported by DRAM Bender uncovers a larger set of bit-flips on a victim row compared to the data patterns commonly used by prior work. We demonstrate the extensibility of DRAM Bender by implementing it on five different FPGAs with DDR4 and DDR3 support. DRAM Bender is freely and openly available at https://github.com/CMU-SAFARI/DRAM-Bender.Comment: To appear in TCAD 202

Towards the Avoidance of Counterfeit Memory: Identifying the DRAM Origin

Due to the globalization in the semiconductor supply chain, counterfeit dynamic random-access memory (DRAM) chips/modules have been spreading worldwide at an alarming rate. Deploying counterfeit DRAM modules into an electronic system can have severe consequences on security and reliability domains because of their sub-standard quality, poor performance, and shorter life span. Besides, studies suggest that a counterfeit DRAM can be more vulnerable to sophisticated attacks. However, detecting counterfeit DRAMs is very challenging because of their nature and ability to pass the initial testing. In this paper, we propose a technique to identify the DRAM origin (i.e., the origin of the manufacturer and the specification of individual DRAM) to detect and prevent counterfeit DRAM modules. A silicon evaluation shows that the proposed method reliably identifies off-the-shelf DRAM modules from three major manufacturers

Castell: a heterogeneous cmp architecture scalable to hundreds of processors

Technology improvements and power constrains have taken multicore architectures to dominate microprocessor designs over uniprocessors. At the same time, accelerator based architectures have shown that heterogeneous multicores are very efficient and can provide high throughput for parallel applications, but with a high-programming effort. We propose Castell a scalable chip multiprocessor architecture that can be programmed as uniprocessors, and provides the high throughput of accelerator-based architectures. Castell relies on task-based programming models that simplify software development. These models use a runtime system that dynamically finds, schedules, and adds hardware-specific features to parallel tasks. One of these features is DMA transfers to overlap computation and data movement, which is known as double buffering. This feature allows applications on Castell to tolerate large memory latencies and lets us design the memory system focusing on memory bandwidth. In addition to provide programmability and the design of the memory system, we have used a hierarchical NoC and added a synchronization module. The NoC design distributes memory traffic efficiently to allow the architecture to scale. The synchronization module is a consequence of the large performance degradation of application for large synchronization latencies. Castell is mainly an architecture framework that enables the definition of domain-specific implementations, fine-tuned to a particular problem or application. So far, Castell has been successfully used to propose heterogeneous multicore architectures for scientific kernels, video decoding (using H.264), and protein sequence alignment (using Smith-Waterman and clustalW). It has also been used to explore a number of architecture optimizations such as enhanced DMA controllers, and architecture support for task-based programming models. ii

Post-silicon Validation of Radiation Hardened Microprocessor and SRAM arrays

abstract: Digital systems are increasingly pervading in the everyday lives of humans. The security of these systems is a concern due to the sensitive data stored in them. The physically unclonable function (PUF) implemented on hardware provides a way to protect these systems. Static random-access memories (SRAMs) are designed and used as a strong PUF to generate random numbers unique to the manufactured integrated circuit (IC). Digital systems are important to the technological improvements in space exploration. Space exploration requires radiation hardened microprocessors which minimize the functional disruptions in the presence of radiation. The design highly efficient radiation-hardened microprocessor for enabling spacecraft (HERMES) is a radiation-hardened microprocessor with performance comparable to the commercially available designs. These designs are manufactured using a foundry complementary metal-oxide semiconductor (CMOS) 55-nm triple-well process. This thesis presents the post silicon validation results of the HERMES and the PUF mode of SRAM across process corners. Chapter 1 gives an overview of the blocks implemented on the test chip 25. It also talks about the pre-silicon functional verification methodology used for the test chip. Chapter 2 discusses about the post silicon testing setup of test chip 25 and the validation of the setup. Chapter 3 describes the architecture and the test bench of the HERMES along with its testing results. Chapter 4 discusses the test bench and the perl scripts used to test the SRAM along with its testing results. Chapter 5 gives a summary of the post-silicon validation results of the HERMES and the PUF mode of SRAM.Dissertation/ThesisMasters Thesis Electrical Engineering 201