57 research outputs found
Towards Dual-functional Radar-Communication Systems: Optimal Waveform Design
We focus on a dual-functional multi-input-multi-output (MIMO)
radar-communication (RadCom) system, where a single transmitter communicates
with downlink cellular users and detects radar targets simultaneously. Several
design criteria are considered for minimizing the downlink multi-user
interference. First, we consider both the omnidirectional and directional
beampattern design problems, where the closed-form globally optimal solutions
are obtained. Based on these waveforms, we further consider a weighted
optimization to enable a flexible trade-off between radar and communications
performance and introduce a low-complexity algorithm. The computational costs
of the above three designs are shown to be similar to the conventional
zero-forcing (ZF) precoding. Moreover, to address the more practical constant
modulus waveform design problem, we propose a branch-and-bound algorithm that
obtains a globally optimal solution and derive its worst-case complexity as a
function of the maximum iteration number. Finally, we assess the effectiveness
of the proposed waveform design approaches by numerical results.Comment: 13 pages, 10 figures. This work has been submitted to the IEEE for
possible publication. Copyright may be transferred without notice, after
which this version may no longer be accessibl
Joint Radar and Communication Design: Applications, State-of-the-Art, and the Road Ahead
Sharing of the frequency bands between radar and communication systems has attracted substantial attention, as it can avoid under-utilization of otherwise permanently allocated spectral resources, thus improving efficiency. Further, there is increasing demand for radar and communication systems that share the hardware platform as well as the frequency band, as this not only decongests the spectrum, but also benefits both sensing and signaling operations via the full cooperation between both functionalities. Nevertheless, the success of spectrum and hardware sharing between radar and communication systems critically depends on high-quality joint radar and communication designs. In the first part of this paper, we overview the research progress in the areas of radar-communication coexistence and dual-functional radar-communication (DFRC) systems, with particular emphasis on application scenarios and technical approaches. In the second part, we propose a novel transceiver architecture and frame structure for a DFRC base station (BS) operating in the millimeter wave (mmWave) band, using the hybrid analog-digital (HAD) beamforming technique. We assume that the BS is serving a multi-antenna user equipment (UE) over a mmWave channel, and at the same time it actively detects targets. The targets also play the role of scatterers for the communication signal. In that framework, we propose a novel scheme for joint target search and communication channel estimation, which relies on omni-directional pilot signals generated by the HAD structure. Given a fully-digital communication precoder and a desired radar transmit beampattern, we propose to design the analog and digital precoders under non-convex constant-modulus (CM) and power constraints, such that the BS can formulate narrow beams towards all the targets, while pre-equalizing the impact of the communication channel. Furthermore, we design a HAD receiver that can simultaneously process signals from the UE and echo waves from the targets. By tracking the angular variation of the targets, we show that it is possible to recover the target echoes and mitigate the resulting interference to the UE signals, even when the radar and communication signals share the same signal-to-noise ratio (SNR). The feasibility and efficiency of the proposed approaches in realizing DFRC are verified via numerical simulations. Finally, the paper concludes with an overview of the open problems in the research field of communication and radar spectrum sharing (CRSS)
Massive MIMO is a Reality -- What is Next? Five Promising Research Directions for Antenna Arrays
Massive MIMO (multiple-input multiple-output) is no longer a "wild" or
"promising" concept for future cellular networks - in 2018 it became a reality.
Base stations (BSs) with 64 fully digital transceiver chains were commercially
deployed in several countries, the key ingredients of Massive MIMO have made it
into the 5G standard, the signal processing methods required to achieve
unprecedented spectral efficiency have been developed, and the limitation due
to pilot contamination has been resolved. Even the development of fully digital
Massive MIMO arrays for mmWave frequencies - once viewed prohibitively
complicated and costly - is well underway. In a few years, Massive MIMO with
fully digital transceivers will be a mainstream feature at both sub-6 GHz and
mmWave frequencies. In this paper, we explain how the first chapter of the
Massive MIMO research saga has come to an end, while the story has just begun.
The coming wide-scale deployment of BSs with massive antenna arrays opens the
door to a brand new world where spatial processing capabilities are
omnipresent. In addition to mobile broadband services, the antennas can be used
for other communication applications, such as low-power machine-type or
ultra-reliable communications, as well as non-communication applications such
as radar, sensing and positioning. We outline five new Massive MIMO related
research directions: Extremely large aperture arrays, Holographic Massive MIMO,
Six-dimensional positioning, Large-scale MIMO radar, and Intelligent Massive
MIMO.Comment: 20 pages, 9 figures, submitted to Digital Signal Processin
MU-MIMO Communications with MIMO Radar: From Co-existence to Joint Transmission
Beamforming techniques are proposed for a joint multi-input-multi-output
(MIMO) radar-communication (RadCom) system, where a single device acts both as
a radar and a communication base station (BS) by simultaneously communicating
with downlink users and detecting radar targets. Two operational options are
considered, where we first split the antennas into two groups, one for radar
and the other for communication. Under this deployment, the radar signal is
designed to fall into the null-space of the downlink channel. The communication
beamformer is optimized such that the beampattern obtained matches the radar's
beampattern while satisfying the communication performance requirements. To
reduce the optimizations' constraints, we consider a second operational option,
where all the antennas transmit a joint waveform that is shared by both radar
and communications. In this case, we formulate an appropriate probing
beampattern, while guaranteeing the performance of the downlink communications.
By incorporating the SINR constraints into objective functions as penalty
terms, we further simplify the original beamforming designs to weighted
optimizations, and solve them by efficient manifold algorithms. Numerical
results show that the shared deployment outperforms the separated case
significantly, and the proposed weighted optimizations achieve a similar
performance to the original optimizations, despite their significantly lower
computational complexity.Comment: 15 pages, 15 figures. This work has been submitted to the IEEE for
possible publication. Copyright may be transferred without notice, after
which this version may no longer be accessibl
Radar and Communication Coexistence Enabled by Interference Exploitation
In this paper, we propose a novel approach for the spectrum sharing between Multi-Input-Multi-Output (MIMO) radar and downlink multi-user Multi-Input- Single-Output (MU-MISO) communication system. To obtain a power-efficient beamforming at the base station (BS), we utilize the constructive multi- user interference (MUI) as a source of green signal power. The proposed beamforming design mainly focuses on two optimization problems, i.e., transmit power minimization for BS and interference minimization for radar, subject to given performance requirements of the two systems. We further consider the impact of the proposed methods on radar, where the detection probability for MIMO radar in the presence of the interference from BS is analytically derived, and important trade-offs are revealed. Numerical results show that the proposed approach outperforms the conventional beamforming designs by achieving a significant performance gain under the discussed coexistence scenario
- …