Avalanche: A communication and memory architecture for scalable parallel computing

technical reportAs the gap between processor and memory speeds widens?? system designers will inevitably incorpo rate increasingly deep memory hierarchies to maintain the balance between processor and memory system performance At the same time?? most communication subsystems are permitted access only to main memory and not a processor s top level cache As memory latencies increase?? this lack of integration between the memory and communication systems will seriously impede interprocessor communication performance and limit e ective scalability In the Avalanche project we are re designing the memory architecture of a commercial RISC multiprocessor?? the HP PA RISC ?? to include a new multi level context sensitive cache that is tightly coupled to the communication fabric The primary goal of Avalanche s integrated cache and communication controller is attack ing end to end communication latency in all of its forms This includes cache misses induced by excessive invalidations and reloading of shared data by write invalidate coherence protocols and cache misses induced by depositing incoming message data in main memory and faulting it into the cache An execution driven simulation study of Avalanche s architecture indicates that it can reduce cache stalls by and overall execution times b

Exploring the value of supporting multiple DSM protocols in Hardware DSM Controllers

Journal ArticleThe performance of a hardware distributed shared memory (DSM) system is largely dependent on its architect's ability to reduce the number of remote memory misses that occur. Previous attempts to solve this problem have included measures such as supporting both the CC-NUMA and S-COMA architectures is the same machine and providing a programmable DSM controller that can emulate any DSM mechanism. In this paper we first present the design of a DSM controller that supports multiple DSM protocols in custom hardware, and allows the programmer or compiler to specify on a per-variable basis what protocol to use to keep that variable coherent. This simulated performance of this DSM controller compares favorably with that of conventional single-protocol custom hardware designs, often outperforming the conventional systems by a factor of two. To achieve these promising results, that multi-protocol DSM controller needed to support only two DSM architectures (CC-NUMA and S-COMA) and three coherency protocols (both release and sequentially consistent write invalidate and release consistent write update). This work demonstrates the value of supporting a degree of flexibility in one's DSM controller design and suggests what operations such a flexible DSM controller should support

Dynamic File-Access Characteristics of a Production Parallel Scientific Workload

Multiprocessors have permitted astounding increases in computational performance, but many cannot meet the intense I/O requirements of some scientific applications. An important component of any solution to this I/O bottleneck is a parallel file system that can provide high-bandwidth access to tremendous amounts of data in parallel to hundreds or thousands of processors. Most successful systems are based on a solid understanding of the characteristics of the expected workload, but until now there have been no comprehensive workload characterizations of multiprocessor file systems. We began the CHARISMA project in an attempt to fill that gap. We instrumented the common node library on the iPSC/860 at NASA Ames to record all file-related activity over a two-week period. Our instrumentation is different from previous efforts in that it collects information about every read and write request and about the mix of jobs running in the machine (rather than from selected applications). The trace analysis in this paper leads to many recommendations for designers of multiprocessor file systems. First, the file system should support simultaneous access to many different files by many jobs. Second, it should expect to see many small requests, predominantly sequential and regular access patterns (although of a different form than in uniprocessors), little or no concurrent file-sharing between jobs, significant byte- and block-sharing between processes within jobs, and strong interprocess locality. Third, our trace-driven simulations showed that these characteristics led to great success in caching, both at the compute nodes and at the I/O nodes. Finally, we recommend supporting strided I/O requests in the file-system interface, to reduce overhead and allow more performance optimization by the file system

Galley: A New Parallel File System for Parallel Applications

Most current multiprocessor file systems are designed to use multiple disks in parallel, using the high aggregate bandwidth to meet the growing I/O requirements of parallel scientific applications. Most multiprocessor file systems provide applications with a conventional Unix-like interface, allowing the application to access those multiple disks transparently. This interface conceals the parallelism within the file system, increasing the ease of programmability, but making it difficult or impossible for sophisticated application and library programmers to use knowledge about their I/O to exploit that parallelism. In addition to providing an insufficient interface, most current multiprocessor file systems are optimized for a different workload than they are being asked to support. In this work we examine current multiprocessor file systems, as well as how those file systems are used by scientific applications. Contrary to the expectations of the designers of current parallel file systems, the workloads on those systems are dominated by requests to read and write small pieces of data. Furthermore, rather than being accessed sequentially and contiguously, as in uniprocessor and supercomputer workloads, files in multiprocessor file systems are accessed in regular, structured, but non-contiguous patterns. Based on our observations of multiprocessor workloads, we have designed Galley, a new parallel file system that is intended to efficiently support realistic scientific multiprocessor workloads. In this work, we introduce Galley and discuss its design and implementation. We describe Galley\u27s new three-dimensional file structure and discuss how that structure can be used by parallel applications to achieve higher performance. We introduce several new data-access interfaces, which allow applications to explicitly describe the regular access patterns we found to be common in parallel file system workloads. We show how these new interfaces allow parallel applications to achieve tremendous increases in I/O performance. Finally, we discuss how Galley\u27s new file structure and data-access interfaces can be useful in practice

Prefetching and Caching Techniques in File Systems for Mimd Multiprocessors

The increasing speed of the most powerful computers, especially multiprocessors, makes it difficult to provide sufficient I/O bandwidth to keep them running at full speed for the largest problems. Trends show that the difference in the speed of disk hardware and the speed of processors is increasing, with I/O severely limiting the performance of otherwise fast machines. This widening access-time gap is known as the “I/O bottleneck crisis.” One solution to the crisis, suggested by many researchers, is to use many disks in parallel to increase the overall bandwidth. \par This dissertation studies some of the file system issues needed to get high performance from parallel disk systems, since parallel hardware alone cannot guarantee good performance. The target systems are large MIMD multiprocessors used for scientific applications, with large files spread over multiple disks attached in parallel. The focus is on automatic caching and prefetching techniques. We show that caching and prefetching can transparently provide the power of parallel disk hardware to both sequential and parallel applications using a conventional file system interface. We also propose a new file system interface (compatible with the conventional interface) that could make it easier to use parallel disks effectively. \par Our methodology is a mixture of implementation and simulation, using a software testbed that we built to run on a BBN GP1000 multiprocessor. The testbed simulates the disks and fully implements the caching and prefetching policies. Using a synthetic workload as input, we use the testbed in an extensive set of experiments. The results show that prefetching and caching improved the performance of parallel file systems, often dramatically

An occam Style Communications System for UNIX Networks

This document describes the design of a communications system which provides occam style communications primitives under a Unix environment, using TCP/IP protocols, and any number of other protocols deemed suitable as underlying transport layers. The system will integrate with a low overhead scheduler/kernel without incurring significant costs to the execution of processes within the run time environment. A survey of relevant occam and occam3 features and related research is followed by a look at the Unix and TCP/IP facilities which determine our working constraints, and a description of the T9000 transputer's Virtual Channel Processor, which was instrumental in our formulation. Drawing from the information presented here, a design for the communications system is subsequently proposed. Finally, a preliminary investigation of methods for lightweight access control to shared resources in an environment which does not provide support for critical sections, semaphores, or busy waiting, is made. This is presented with relevance to mutual exclusion problems which arise within the proposed design. Future directions for the evolution of this project are discussed in conclusion

Microarchitectural techniques to reduce energy consumption in the memory hierarchy

This thesis states that dynamic profiling of the memory reference stream can improve energy and performance in the memory hierarchy. The research presented in this theses provides multiple instances of using lightweight hardware structures to profile the memory reference stream. The objective of this research is to develop microarchitectural techniques to reduce energy consumption at different levels of the memory hierarchy. Several simple and implementable techniques were developed as a part of this research. One of the techniques identifies and eliminates redundant refresh operations in DRAM and reduces DRAM refresh power. Another, reduces leakage energy in L2 and higher level caches for multiprocessor systems. The emphasis of this research has been to develop several techniques of obtaining energy savings in caches using a simple hardware structure called the counting Bloom filter (CBF). CBFs have been used to predict L2 cache misses and obtain energy savings by not accessing the L2 cache on a predicted miss. A simple extension of this technique allows CBFs to do way-estimation of set associative caches to reduce energy in cache lookups. Another technique using CBFs track addresses in a Virtual Cache and reduce false synonym lookups. Finally this thesis presents a technique to reduce dynamic power consumption in level one caches using significance compression. The significant energy and performance improvements demonstrated by the techniques presented in this thesis suggest that this work will be of great value for designing memory hierarchies of future computing platforms.Ph.D.Committee Chair: Lee, Hsien-Hsin S.; Committee Member: Cahtterjee,Abhijit; Committee Member: Mukhopadhyay, Saibal; Committee Member: Pande, Santosh; Committee Member: Yalamanchili, Sudhaka