Towards low-complexity wireless technology classification across multiple environments

To cope with the increasing number of co-existing wireless standards, complex machine learning techniques have been proposed for wireless technology classification. However, machine learning techniques in the scientific literature suffer from some shortcomings, namely: (i) they are often trained using data from only a single measurement location, and as such the results do not necessarily generalise and (ii) they typically do not evaluate complexity/accuracy trade-offs of the proposed solutions. To remedy these shortcomings, this paper investigates which resource-friendly approaches are suitable across multiple heterogeneous environments. To this end, the paper designs and evaluates classifiers for LTE, Wi-Fi and DVB-T technologies using multiple datasets to investigate the complexity/accuracy trade-offs between manual feature extraction and automatic feature learning techniques. Our wireless technology classification reaches an accuracy up to 99%. Moreover, we propose the use of data augmentation techniques to extend these results to unseen environments at the cost of only 2% reduction in accuracy. When concerning generalisation capabilities, complex automatic learning techniques surpass simple manual feature extraction approaches. Finally, the complexity of these automatic learning techniques can be significantly reduced by using computationally less intensive received signal strength indicator data while reaching acceptable accuracies in unseen environments (92% vs 97%). (C) 2019 Elsevier B.V. All rights reserved

Building accurate radio environment maps from multi-fidelity spectrum sensing data

In cognitive wireless networks, active monitoring of the wireless environment is often performed through advanced spectrum sensing and network sniffing. This leads to a set of spatially distributed measurements which are collected from different sensing devices. Nowadays, several interpolation methods (e.g., Kriging) are available and can be used to combine these measurements into a single globally accurate radio environment map that covers a certain geographical area. However, the calibration of multi-fidelity measurements from heterogeneous sensing devices, and the integration into a map is a challenging problem. In this paper, the auto-regressive co-Kriging model is proposed as a novel solution. The algorithm is applied to model measurements which are collected in a heterogeneous wireless testbed environment, and the effectiveness of the new methodology is validated

Measurement and Optimization of LTE Performance

4G Long Term Evolution (LTE) mobile system is the fourth generation communication system adopted worldwide to provide high-speed data connections and high-quality voice calls. Given the recent deployment by mobile service providers, unlike GSM and UMTS, LTE can be still considered to be in its early stages and therefore many topics still raise great interest among the international scientific research community: network performance assessment, network optimization, selective scheduling, interference management and coexistence with other communication systems in the unlicensed band, methods to evaluate human exposure to electromagnetic radiation are, as a matter of fact, still open issues. In this work techniques adopted to increase LTE radio performances are investigated. One of the most wide-spread solutions proposed by the standard is to implement MIMO techniques and within a few years, to overcome the scarcity of spectrum, LTE network operators will offload data traffic by accessing the unlicensed 5 GHz frequency. Our Research deals with an evaluation of 3GPP standard in a real test best scenario to evaluate network behavior and performance

Vertical Handover Decision Algorithm in Heterogeneous Wireless Networks

[EN] With the recent progress in the area of cellular communication the issue of inter cells handover without dropping an ongoing connection with the base station has arisen. In this paper, the focus is on the performance of vertical handover. Various proposed interconnection architectures for vertical handover in heterogeneous networks were studied. Two different algorithms to make the decision on when and to which network perform a handover were considered. In the first of them the decision is based on the received signal strength (RSS). In the second one a fuzzy logic system that uses RSS, bandwidth, battery power and packet loss as the input parameters is proposed. The simulation results show that the algorithm based on fuzzy logic leads to a reduction of the number of handovers and a minimisation of the power consumption as compared to the first algorithm used here and the existing algorithms.This work was supported by the Spanish Ministry of Economy and Competitiveness through Grants TIN2013-47272-C2-1-R and BES-2011-045551.Benaatou, W.; Latif, A.; Pla, V. (2017). Vertical Handover Decision Algorithm in Heterogeneous Wireless Networks. International Journal of Internet Protocol Technology (Online). 10(4):197-213. https://doi.org/10.1504/IJIPT.2017.08891419721310

Performance Modelling and Analysis of a New CoMP-based Handover Scheme for Next Generation Wireless Networks. Performance Modelling and Analysis for the Design and Development of a New Handover Scheme for Cell Edge Users in Next Generation Wireless Networks (NGWNs) Based on the Coordinated Multi-Point (CoMP) Joint Transmission (JT) Technique

Inter-Cell Interference (ICI) will be one of main problems for degrading the performance of future wireless networks at cell edge. This adverse situation will become worst in the presence of dense deployment of micro and macro cells. In this context, the Coordinated Multi-Point (CoMP) technique was introduced to mitigate ICI in Next Generation Wireless Networks (NGWN) and increase their network performance at cell edge. Even though the CoMP technique provides satisfactory solutions of various problems at cell edge, nevertheless existing CoMP handover schemes do not prevent unnecessary handover initialisation decisions and never discuss the drawbacks of CoMP handover technique such as excessive feedback and resource sharing among UEs. In this research, new CoMP-based handover schemes are proposed in order to minimise unnecessary handover decisions at cell edge and determine solution of drawbacks of CoMP technique in conjunction with signal measurements such as Reference Signal Received Power (RSRP) and Received Signal Received Quality (RSRQ). A combination of calculations of RSRP and RSRQ facilitate a credible decision making process of CoMP mode and handover mode at cell edge. Typical numerical experiments indicate that by triggering the CoMP mode along with solutions of drawbacks, the overall network performance is constantly increase as the number of unnecessary handovers is progressively reduced

Positioning by multicell fingerprinting in urban NB-IoT networks

Narrowband Internet of Things (NB-IoT) has quickly become a leading technology in the deployment of IoT systems and services, owing to its appealing features in terms of coverage and energy efficiency, as well as compatibility with existing mobile networks. Increasingly, IoT services and applications require location information to be paired with data collected by devices; NB-IoT still lacks, however, reliable positioning methods. Time-based techniques inherited from long-term evolution (LTE) are not yet widely available in existing networks and are expected to perform poorly on NB-IoT signals due to their narrow bandwidth. This investigation proposes a set of strategies for NB-IoT positioning based on fingerprinting that use coverage and radio information from multiple cells. The proposed strategies were evaluated on two large-scale datasets made available under an open-source license that include experimental data from multiple NB-IoT operators in two large cities: Oslo, Norway, and Rome, Italy. Results showed that the proposed strategies, using a combination of coverage and radio information from multiple cells, outperform current state-of-the-art approaches based on single cell fingerprinting, with a minimum average positioning error of about 20 m when using data for a single operator that was consistent across the two datasets vs. about 70 m for the current state-of-the-art approaches. The combination of data from multiple operators and data smoothing further improved positioning accuracy, leading to a minimum average positioning error below 15 m in both urban environments

Real-Time Localization Using Software Defined Radio

Service providers make use of cost-effective wireless solutions to identify, localize, and possibly track users using their carried MDs to support added services, such as geo-advertisement, security, and management. Indoor and outdoor hotspot areas play a significant role for such services. However, GPS does not work in many of these areas. To solve this problem, service providers leverage available indoor radio technologies, such as WiFi, GSM, and LTE, to identify and localize users. We focus our research on passive services provided by third parties, which are responsible for (i) data acquisition and (ii) processing, and network-based services, where (i) and (ii) are done inside the serving network. For better understanding of parameters that affect indoor localization, we investigate several factors that affect indoor signal propagation for both Bluetooth and WiFi technologies. For GSM-based passive services, we developed first a data acquisition module: a GSM receiver that can overhear GSM uplink messages transmitted by MDs while being invisible. A set of optimizations were made for the receiver components to support wideband capturing of the GSM spectrum while operating in real-time. Processing the wide-spectrum of the GSM is possible using a proposed distributed processing approach over an IP network. Then, to overcome the lack of information about tracked devices’ radio settings, we developed two novel localization algorithms that rely on proximity-based solutions to estimate in real environments devices’ locations. Given the challenging indoor environment on radio signals, such as NLOS reception and multipath propagation, we developed an original algorithm to detect and remove contaminated radio signals before being fed to the localization algorithm. To improve the localization algorithm, we extended our work with a hybrid based approach that uses both WiFi and GSM interfaces to localize users. For network-based services, we used a software implementation of a LTE base station to develop our algorithms, which characterize the indoor environment before applying the localization algorithm. Experiments were conducted without any special hardware, any prior knowledge of the indoor layout or any offline calibration of the system