Hybrid Radio-map for Noise Tolerant Wireless Indoor Localization

In wireless networks, radio-map based locating techniques are commonly used to cope the complex fading feature of radio signal, in which a radio-map is built by calibrating received signal strength (RSS) signatures at training locations in the offline phase. However, in severe hostile environments, such as in ship cabins where severe shadowing, blocking and multi-path fading effects are posed by ubiquitous metallic architecture, even radio-map cannot capture the dynamics of RSS. In this paper, we introduced multiple feature radio-map location method for severely noisy environments. We proposed to add low variance signature into radio map. Since the low variance signatures are generally expensive to obtain, we focus on the scenario when the low variance signatures are sparse. We studied efficient construction of multi-feature radio-map in offline phase, and proposed feasible region narrowing down and particle based algorithm for online tracking. Simulation results show the remarkably performance improvement in terms of positioning accuracy and robustness against RSS noises than the traditional radio-map method.Comment: 6 pages, 11th IEEE International Conference on Networking, Sensing and Control, April 7-9, 2014, Miami, FL, US

The Design and Implementation of a Mobile RFID Tag Sorting Robot

Libraries, manufacturing lines, and offices of the future all stand to benefit from knowing the exact spatial order of RFID-tagged books, components, and folders, respectively. To this end, radio- based localization has demonstrated the potential for high accuracy. Key enabling ideas include motion-based synthetic aperture radar, multipath detection, and the use of different frequencies (channels). But indoors in real-world situations, current systems often fall short of the mark, mainly because of the prevalence and strength of "multipath" reflections of the radio signal off nearby objects. In this paper we describe the design and implementation of MobiTagbot, an autonomous wheeled robot reader that conducts a roving survey of the above such areas to achieve an exact spatial order of RFID- tagged objects in very close (1–6 cm) spacings. Our approach leverages a serendipitous correlation between the changes in multipath reflections that occur with motion and the effect of changing the carrier frequency (channel) of the RFID query. By carefully observing the relationship between channel and phase, MobiTagbot detects if multipath is likely prevalent at a given robot reader location. If so, MobiTagbot excludes phase readings from that reader lo- cation, and generates a final location estimate using phase readings from other locations as the robot reader moves in space. Experimentally, we demonstrate that cutting-edge localization algorithms including Tagoram are not accurate enough to exactly order items in very close proximity, but MobiTagbot is, achieving nearly 100% ordering accuracy for items at low (3–6 cm) spacings and 86% accuracy for items at very low (1–3 cm) spacings

RF-MVO: Simultaneous 3D object localization and camera trajectory recovery using RFID Devices and a 2D monocular camera

© 2018 IEEE. Most of the existing RFID-based localization systems cannot well locate RFID-tagged objects in a 3D space. Limited robot-based RFID solutions require reader antennas to be carried by a robot moving along an already-known trajectory at a constant speed. As the first attempt, this paper presents RF-MVO, which fuses battery-free RFID and monocular visual odometry to locate stationary RFID tags in a 3D space and recover an unknown trajectory of reader antennas binding with a 2D monocular camera. The proposed hybrid system exhibits three unique features. Firstly, since the trajectory of a 2D monocular camera can only be recovered up to an unknown scale factor, RF-MVO combines the relative-scale camera trajectory with depth-enabled RF phase to estimate an absolute scale factor and spatially incident angles of an RFID tag. Secondly, we propose a joint optimization algorithm consisting of coarse-to-fine angular refinement, 3D tag localization and parameter nonlinear optimization, to improve real-time performance. Thirdly, RF-MVO can determine the effect of relative tag-antenna geometry on the estimation precision, providing optimal tag positions and absolute scale factors. Our experiments show that RF-MVO can achieve 6.23cm tag localization accuracy in a 3D space and 0.0158 absolute scale factor estimation accuracy for camera trajectory recovery

Real-time indoor assistive localization with mobile omnidirectional vision and cloud GPU acceleration

In this paper we propose a real-time assistive localization approach to help blind and visually impaired people in navigating an indoor environment. The system consists of a mobile vision front end with a portable panoramic lens mounted on a smart phone, and a remote image feature-based database of the scene on a GPU-enabled server. Compact and elective omnidirectional image features are extracted and represented in the smart phone front end, and then transmitted to the server in the cloud. These features of a short video clip are used to search the database of the indoor environment via image-based indexing to find the location of the current view within the database, which is associated with floor plans of the environment. A median-filter-based multi-frame aggregation strategy is used for single path modeling, and a 2D multi-frame aggregation strategy based on the candidates’ distribution densities is used for multi-path environmental modeling to provide a final location estimation. To deal with the high computational cost in searching a large database for a realistic navigation application, data parallelism and task parallelism properties are identified in the database indexing process, and computation is accelerated by using multi-core CPUs and GPUs. User-friendly HCI particularly for the visually impaired is designed and implemented on an iPhone, which also supports system configurations and scene modeling for new environments. Experiments on a database of an eight-floor building are carried out to demonstrate the capacity of the proposed system, with real-time response (14 fps) and robust localization results

A multimodal Fingerprint-based Indoor Positioning System for airports

[EN] Indoor Localization techniques are becoming popular in order to provide a seamless indoor positioning system enhancing the traditional GPS service that is only suitable for outdoor environments. Though there are proprietary and costly approaches targeting high accuracy positioning, Wi-Fi and BLE networks are widely deployed in many public and private buildings (e.g. shopping malls, airports, universities, etc.). These networks are accessible through mobile phones resulting in an effective commercial off-the-self basic infrastructure for an indoor service. The obtained positioning accuracy is still being improved and there is on-going research on algorithms adapted for Wi-Fi and BLE and also for the particularities of indoor environments. This paper focuses not only on indoor positioning techniques, but also on a multimodal approach. Traditional proposals employ only one network technology whereas this paper integrates two different technologies in order to provide improved accuracy. It also sets the basis for combining (merging) additional technologies, if available. The initial results show that the positioning service performs better with a multimodal approach compared to individual (monomodal) approaches and even compared with Google¿s geolocation service in public spaces such as airports.This work was supported in part by the European Commission through the Door to Door Information for Airports and Airlines Project under Grant GA 635885 and in part by the European Commission through the Interoperability of Heterogeneous IoT Platforms Project under Grant 687283.Molina Moreno, B.; Olivares-Gorriti, E.; Palau Salvador, CE.; Esteve Domingo, M. (2018). A multimodal Fingerprint-based Indoor Positioning System for airports. IEEE Access. 6:10092-10106. https://doi.org/10.1109/ACCESS.2018.2798918S1009210106

A Novel Approach To Intelligent Navigation Of A Mobile Robot In A Dynamic And Cluttered Indoor Environment

The need and rationale for improved solutions to indoor robot navigation is increasingly driven by the influx of domestic and industrial mobile robots into the market. This research has developed and implemented a novel navigation technique for a mobile robot operating in a cluttered and dynamic indoor environment. It divides the indoor navigation problem into three distinct but interrelated parts, namely, localization, mapping and path planning. The localization part has been addressed using dead-reckoning (odometry). A least squares numerical approach has been used to calibrate the odometer parameters to minimize the effect of systematic errors on the performance, and an intermittent resetting technique, which employs RFID tags placed at known locations in the indoor environment in conjunction with door-markers, has been developed and implemented to mitigate the errors remaining after the calibration. A mapping technique that employs a laser measurement sensor as the main exteroceptive sensor has been developed and implemented for building a binary occupancy grid map of the environment. A-r-Star pathfinder, a new path planning algorithm that is capable of high performance both in cluttered and sparse environments, has been developed and implemented. Its properties, challenges, and solutions to those challenges have also been highlighted in this research. An incremental version of the A-r-Star has been developed to handle dynamic environments. Simulation experiments highlighting properties and performance of the individual components have been developed and executed using MATLAB. A prototype world has been built using the WebotsTM robotic prototyping and 3-D simulation software. An integrated version of the system comprising the localization, mapping and path planning techniques has been executed in this prototype workspace to produce validation results

Indoor And Outdoor Real Time Information Collection in Disaster Scenario

A disaster usually severely harms human health and property. After a disaster, great amount of information of a disaster area is needed urgently. The information not only indicates the severity of the disaster, but also is crucial for an efficient search and rescue process. In order to quickly and accurately collect real time information in a disaster scenario, a mobile platform is developed for an outdoor scenario and a localization and navigation system for responders is introduced for an indoor scenario. The mobile platform has been integrated to the DIORAMA system. It is built with a 6-wheel robot chassis along with an Arduino microcontroller. Controlled by a mounted Android smartphone, the mobile platform can receive commands from incident commanders and quickly respond to the commands. While patrolling in a disaster area, a constant RFID signal is collected to improve the localization accuracy of victims. Pictures and videos are also captured in order to enhance the situational awareness of rescuers. The design of the indoor information collection is focused on the responder side. During a disaster scenario, it is hard to track responders’ locations in an indoor environment. In this thesis, an indoor localization and navigation system based on Bluetooth low energy and Android is developed for helping responders report current location and quickly find the right path in the environment. Different localization algorithms are investigated and implemented. A navigation system based on A­* is also proposed

Recognition of elementary arm movements using orientation of a tri-axial accelerometer located near the wrist

In this paper we present a method for recognising three fundamental movements of the human arm (reach and retrieve, lift cup to mouth, rotation of the arm) by determining the orientation of a tri-axial accelerometer located near the wrist. Our objective is to detect the occurrence of such movements performed with the impaired arm of a stroke patient during normal daily activities as a means to assess their rehabilitation. The method relies on accurately mapping transitions of predefined, standard orientations of the accelerometer to corresponding elementary arm movements. To evaluate the technique, kinematic data was collected from four healthy subjects and four stroke patients as they performed a number of activities involved in a representative activity of daily living, 'making-a-cup-of-tea'. Our experimental results show that the proposed method can independently recognise all three of the elementary upper limb movements investigated with accuracies in the range 91–99% for healthy subjects and 70–85% for stroke patients