Wind energy harvester interface for sensor nodes

The research topic is developping a power converting interface for the novel FLEHAP wind energy harvester allowing the produced energy to be used for powering small wireless nodes. The harvester\u2019s electrical characteristics were studied and a strategy was developped to control and mainting a maximum power transfer. The electronic power converter interface was designed, containing an AC/DC Buck-Boost converter and controlled with a low power microcontroller. Different prototypes were developped that evolved by reducing the sources of power loss and rendering the system more efficient. The validation of the system was done through simulations in the COSMIC/DITEN lab using generated signals, and then follow-up experiments were conducted with a controllable wind tunnel in the DIFI department University of Genoa. The experiment results proved the functionality of the control algorithm as well as the efficiency that was ramped up by the hardware solutions that were implemented, and generally met the requirement to provide a power source for low-power sensor nodes

Power Management Circuits for Low-Power RF Energy Harvesters

The paper describes the design and implementation of power management circuits for RF energy harvesters suitable for integration in wireless sensor nodes. In particular, we report the power management circuits used to provide the voltage supply of an integrated temperature sensor with analog-to-digital converter. A DC-DC boost converter is used to transfer efficiently the energy harvested from a generic radio-frequency rectifier into a charge reservoir, whereas a linear regulator scales the voltage supply to a suitable value for a sensing and conversion circuit. Implemented in a 65 nm CMOS technology, the power management system achieves a measured overall efficiency of 20%, with an available power of 4.5 μW at the DC-DC converter input. The system can sustain a temperature measurement rate of one sample/s with an RF input power of −28 dBm, making it compatible with the power levels available in generic outdoor environments

An IC architecture for RF Energy Harvesting systems

In this work we present an IC architecture for RF energy harvesting. The system has been designed with a 0.18μm CMOS SMIC technology and optimized at 900MHz. Simulation results have confirmed that the integrated system handles an incoming power typically ranging from -25 dBm to 20 dBm by rectifying the variable input signals into a DC voltage source with an overall efficiency up to 50%. The chip area estimation for the proposed system is as low as 3x3mm2

Circuit design techniques for Power Efficient Microscale Energy Harvesting Systems

Power Management is considered one of the hot topics nowadays, as it is already known that all integrated circuits need a stable supply with low noise, a constant voltage level across time, and the ability to supply large range of loads. Normal batteries do not provide those specifications. A new concept of energy management called energy harvesting is introduced here. Energy harvesting means collecting power from ambient resources like solar power, Radio Frequency (RF) power, energy from motion...etc. The Energy is collected by means of a transducer that directly converts this energy into electrical energy that can be managed by design to supply different loads. Harvested energy management is critical because normal batteries have to be replaced with energy harvesting modules with power management, in order to make integrated circuits fully autonomous; this leads to a decrease in maintenance costs and increases the life time. This work covers the design of an energy harvesting system focusing on micro-scale solar energy harvesting with power management. The target application of this study is a Wireless Sensor Node/Network (WSN) because its applications are very wide and power management in it is a big issue, as it is very hard to replace the battery of a WSN after deployment. The contribution of this work is mainly shown on two different scopes. The first scope is to propose a new tracking technique and to verify on the system level. The second scope is to propose a new optimized architecture for switched capacitor based power converters. At last, some future recommendations are proposed for this work to be more robust and reliable so that it can be transfered to the production phase. The proposed system design is based on the sub-threshold operation. This design approach decreases the amount of power consumed in the control circuit. It can efficiently harvest the maximum power possible from the photo-voltaic cell and transfer this power to the super-capacitor side with high efficiency. It shows a better performance compared to the literature work. The proposed architecture of the charge pump is more efficient in terms of power capability and knee frequency over the basic linear charge pump topology. Comparison with recent topologies are discussed and shows the robustness of the proposed technique

A Multi-Source Harvesting System Applied to Sensor-Based Smart Garments for Monitoring Workers’ Bio-Physical Parameters in Harsh Environments

This paper describes the development and characterization of a smart garment for monitoring the environmental and biophysical parameters of the user wearing it; the wearable application is focused on the control to workers’ conditions in dangerous workplaces in order to prevent or reduce the consequences of accidents. The smart jacket includes flexible solar panels, thermoelectric generators and flexible piezoelectric harvesters to scavenge energy from the human body, thus ensuring the energy autonomy of the employed sensors and electronic boards. The hardware and firmware optimization allowed the correct interfacing of the heart rate and SpO2 sensor, accelerometers, temperature and electrochemical gas sensors with a modified Arduino Pro mini board. The latter stores and processes the sensor data and, in the event of abnormal parameters, sends an alarm to a cloud database, allowing company managers to check them via a web app. The characterization of the harvesting subsection has shown that ≈ 265 mW maximum power can be obtained in a real scenario, whereas the power consumption due to the acquisition, processing and BLE data transmission functions determined that a 10 mAh/day charge is required to ensure the device’s proper operation. By charging a 380 mAh Lipo battery in a few hours by means of the harvesting system, an energy autonomy of 23 days was obtained, in the absence of any further energy contribution

Energy autonomous systems : future trends in devices, technology, and systems

The rapid evolution of electronic devices since the beginning of the nanoelectronics era has brought about exceptional computational power in an ever shrinking system footprint. This has enabled among others the wealth of nomadic battery powered wireless systems (smart phones, mp3 players, GPS, …) that society currently enjoys. Emerging integration technologies enabling even smaller volumes and the associated increased functional density may bring about a new revolution in systems targeting wearable healthcare, wellness, lifestyle and industrial monitoring applications

Active Safety System with RF Energy Harvesting Capabilities for Industrial Applications using Interchangeable Implements

In this paper a system for the remote powering of low power electronic devices is presented. The system has been applied to a real industrial application allowing to enhance active safety in industrial vehicles. It is comprised of two main devices: i) the End Device (ED) with an embedded Radio Frequency (RF) energy harvester; ii) the Illuminator-Gateway Device (IGD) with an embedded RF power transmitter. Thanks to the optimization of the customized dual band Planar Inverted Folded Antenna (PIFA) used, the ULP architecture of the ED, the hardware-software co-design approach used and the optimization of the ED firmware, the proposed system is able to provide up to the 63% of the power required by the ED when it is on duty

Lower-order compensation chain threshold-reduction technique for multi-stage voltage multipliers

This paper presents a novel threshold-compensation technique for multi-stage voltage multipliers employed in low power applications such as passive and autonomous wireless sensing nodes (WSNs) powered by energy harvesters. The proposed threshold-reduction technique enables a topological design methodology which, through an optimum control of the trade-off among transistor conductivity and leakage losses, is aimed at maximizing the voltage conversion efficiency (VCE) for a given ac input signal and physical chip area occupation. The conducted simulations positively assert the validity of the proposed design methodology, emphasizing the exploitable design space yielded by the transistor connection scheme in the voltage multiplier chain. An experimental validation and comparison of threshold-compensation techniques was performed, adopting 2N5247 N-channel junction field effect transistors (JFETs) for the realization of the voltage multiplier prototypes. The attained measurements clearly support the effectiveness of the proposed threshold-reduction approach, which can significantly reduce the chip area occupation for a given target output performance and ac input signal

High Voltage Energy Harvesters

Green energy helps in reducing carbon emission from fossil fuel, harvesting energy from natural resources like wind to power consumer appliances. To date, many researches have been focusing on designing circuits that harvest energy from electromagnetic signals wirelessly. While it could be designed to be efficient, the generated power however is insufficient to drive large loads. Wind energy is highly available environmentally but development of small-scale energy harvesting apparatus aiming to extract significant power from miniature brushless fan has received limited attention. The aim of this chapter is to give audience an insight of different voltage multipliers used in energy harvester and knowledge on various circuit techniques to configure voltage multipliers for use in different high voltage applications. These include AC-DC converter, AC-AC converter and variable AC-DC converter