Platforms and Protocols for the Internet of Things

Building a general architecture for the Internet of Things (IoT) is a very complex task, exacerbated by the extremely large variety of devices, link layer technologies, and services that may be involved in such a system. In this paper, we identify the main blocks of a generic IoT architecture, describing their features and requirements, and analyze the most common approaches proposed in the literature for each block. In particular, we compare three of the most important communication technologies for IoT purposes, i.e., REST, MQTT, and AMQP, and we also analyze three IoT platforms: openHAB, Sentilo, and Parse. The analysis will prove the importance of adopting an integrated approach that jointly addresses several issues and is able to flexibly accommodate the requirements of the various elements of the system. We also discuss a use case which illustrates the design challenges and the choices to make when selecting which protocols and technologies to use

Uplink Transmission Control Methods in LSA-Enabled Cellular Networks

As of now, multiple approaches to increasing network throughput are being studied. For instance, mmWave communications are expected to deliver increase in network throughput to 7 Gbps over 60 and 28 GHz. As a consequence of increasing frequency, the range of communication decreases, but new possibilities arise, such as directional transmissions. Another approach is offloading traffic onto neighbors in case they are connected to a faster link. In case of mobile devices it leads to decreased battery lifetime and increase of power consumption. Another approach is reusing stale bands that were reserved for services that are obsolete and/or defunct. However, there are cases when stale bands are allocated to services that are not defunct, but their activity is low. In this case, it is impossible to reallocate the bands. Despite that, it is still possible to use these bands by using LSA approach by sharing bands between the original owner (incumbent) and licensee. Licensee will need to satisfy the terms of the licensed sharing by keeping the interference power below the threshold and vacating the bands when latter are requested by incumbent. Hence, we must not use shared bands for delay-sensitive traffic or mission-critical services. One possible application of LTE LSA is non-critical IoT devices that are linked to the power grid (weather stations). Therefore, we should balance between satisfying license agreement terms and keeping the network operational. We also need to realize that LSA approach can be applied in cases when location of the incumbent changes rapidly. In this work, power control methods developed for LSA-enabled cellular networks are given. These methods were built for dynamic LSA scenarios, when position of the incumbent changes rapidly and licensee has to readjust power limits on the infrastructure. Aside from that, some minor improvements that were done to the algorithms are described, as well as practical operation example is shown

Distributed scheduling algorithms for LoRa-based wide area cyber-physical systems

Low Power Wide Area Networks (LPWAN) are a class of wireless communication protocols that work over long distances, consume low power and support low datarates. LPWANs have been designed for monitoring applications, with sparse communication from nodes to servers and sparser from servers to nodes. Inspite of their initial design, LPWANs have the potential to target applications with higher and stricter requirements like those of Cyber-Physical Systems (CPS). Due to their long-range capabilities, LPWANs can specifically target CPS applications distributed over a wide-area, which is referred to as Wide-Area CPS (WA-CPS). Augmenting WA-CPSs with wireless communication would allow for more flexible, low-cost and easily maintainable deployment. However, wireless communications come with problems like reduced reliability and unpredictable latencies, making them harder to use for CPSs. With this intention, this thesis explores the use of LPWANs, specifically LoRa, to meet the communication and control requirements of WA-CPSs. The thesis focuses on using LoRa due to its high resilience to noise, several communication parameters to choose from and a freely modifiable communication stack and servers making it ideal for research and deployment. However, LoRaWAN suffers from low reliability due to its ALOHA channel access method. The thesis posits that "Distributed algorithms would increase the protocol's reliability allowing it to meet the requirements of WA-CPSs". Three different application scenarios are explored in this thesis that leverage unexplored aspects of LoRa to meet their requirements. The application scenarios are delay-tolerant vehicular networks, multi-stakeholder WA-CPS deployments and water distribution networks. The systems use novel algorithms to facilitate communication between the nodes and gateways to ensure a highly reliable system. The results outperform state-of-art techniques to prove that LoRa is currently under-utilised and can be used for CPS applications.Open Acces

A Survey of Scheduling in 5G URLLC and Outlook for Emerging 6G Systems

Future wireless communication is expected to be a paradigm shift from three basic service requirements of 5th Generation (5G) including enhanced Mobile Broadband (eMBB), Ultra Reliable and Low Latency communication (URLLC) and the massive Machine Type Communication (mMTC). Integration of the three heterogeneous services into a single system is a challenging task. The integration includes several design issues including scheduling network resources with various services. Specially, scheduling the URLLC packets with eMBB and mMTC packets need more attention as it is a promising service of 5G and beyond systems. It needs to meet stringent Quality of Service (QoS) requirements and is used in time-critical applications. Thus through understanding of packet scheduling issues in existing system and potential future challenges is necessary. This paper surveys the potential works that addresses the packet scheduling algorithms for 5G and beyond systems in recent years. It provides state of the art review covering three main perspectives such as decentralised, centralised and joint scheduling techniques. The conventional decentralised algorithms are discussed first followed by the centralised algorithms with specific focus on single and multi-connected network perspective. Joint scheduling algorithms are also discussed in details. In order to provide an in-depth understanding of the key scheduling approaches, the performances of some prominent scheduling algorithms are evaluated and analysed. This paper also provides an insight into the potential challenges and future research directions from the scheduling perspective

Active Response Using Host-Based Intrusion Detection System and Software-Defined Networking

This research proposes AHNSR: Active Host-based Network Security Response by utilizing Host-based Intrusion Detection Systems (HIDS) with Software-Defined Networking (SDN) to enhance system security by allowing dynamic active response and reconstruction from a global network topology perspective. Responses include traffic redirection, host quarantining, filtering, and more. A testable SDN-controlled network is constructed with multiple hosts, OpenFlow enabled switches, and a Floodlight controller, all linked to a custom, novel interface for the Open-Source SECurity (OSSEC) HIDS framework. OSSEC is implemented in a server-agent architecture, allowing scalability and OS independence. System effectiveness is evaluated against the following factors: alert density and a selective Floodlight module response types. At the expected operational load of 500 events per second (EPS), results reveal a mean system response time of 0.5564 seconds from log generation to flow table update via Floodlights Access Control List module. Load testing further assesses performance at 10 - 10000 EPS for all tested response modules

Modeling the Use of an Airborne Platform for Cellular Communications Following Disruptions

In the wake of a disaster, infrastructure can be severely damaged, hampering telecommunications. An Airborne Communications Network (ACN) allows for rapid and accurate information exchange that is essential for the disaster response period. Access to information for survivors is the start of returning to self-sufficiency, regaining dignity, and maintaining hope. Real-world testing has proven that such a system can be built, leading to possible future expansion of features and functionality of an emergency communications system. Currently, there are no airborne civilian communications systems designed to meet the demands of the public following a natural disaster. A system allowing even a limited amount of communications post-disaster is a great improvement on the current situation, where telecommunications are frequently not available. It is technically feasible to use an airborne, wireless, cellular system quickly deployable to disaster areas and configured to restore some of the functions of damaged terrestrial telecommunications networks. The system requirements were presented, leading to the next stage of the planned research, where a range of possible solutions were examined. The best solution was selected based on the earlier, predefined criteria. The system was modeled, and a test ii system built. The system was tested and redesigned when necessary, to meet the requirements. The research has shown how the combination of technology, especially the recent miniaturizations and move to open source software for cellular network components can allow sophisticated cellular networks to be implemented. The ACN system proposed could enable connectivity and reduce the communications problems that were experienced following Hurricane Sandy and Katrina. Experience with both natural and man-made disasters highlights the fact that communications are useful only to the extent that they are accessible and useable by the population

Internet of Things From Hype to Reality

The Internet of Things (IoT) has gained significant mindshare, let alone attention, in academia and the industry especially over the past few years. The reasons behind this interest are the potential capabilities that IoT promises to offer. On the personal level, it paints a picture of a future world where all the things in our ambient environment are connected to the Internet and seamlessly communicate with each other to operate intelligently. The ultimate goal is to enable objects around us to efficiently sense our surroundings, inexpensively communicate, and ultimately create a better environment for us: one where everyday objects act based on what we need and like without explicit instructions