Adaptive, differential pulse-code modulation for speech processing

The objective of the research reported here is the design of efficient speech coders that can easily be implemented in integrated circuit hardware. Companding techniques like those introduced by M. R. Winkler, J. A. Greefkes, F. DeJager, A. Tomozawa and H. Kaneko were explored along with a large body of theory concerning the application of linear prediction to speech coding. The best features of the speech signal to be measured and coded are the overall amplitude, the resonant frequencies and dampings of the vocal cavity and the fundamental frequency of the vocal cord oscillations. Adaptive quantization was used to track variations in overall amplitude, and adaptive prediction was used to track the frequencies and dampings of the cavity resonances. No attempt was made to exploit redundancies related to the vocal cord oscillations, however. An adaptive differential pulse code modulator (i.e., an ADPCM coder) with a fixed integrator was simulated first. Later a hardware model was constructed, signal to noise measurements were taken and subjective tests conducted. When operating at 4 bits per sample, speech of a quality nearly equal to that of 7 bit log PCM was regenerated by the ADPCM encoder. At 3 bits per sample speech quality was nearly equal to 6 bit log PCM. Further improvements were achieved with the application of adaptive predictors in place of the integrator. The predictor coefficients form a vector which is adapted in a direction away from the gradient with respect to the error power. By applying this technique to the quantized signals occurring in the coder, the coefficients are derived from the quantized error signal; hence, there is no need to transmit them

Time and frequency domain algorithms for speech coding

The promise of digital hardware economies (due to recent advances in VLSI technology), has focussed much attention on more complex and sophisticated speech coding algorithms which offer improved quality at relatively low bit rates. This thesis describes the results (obtained from computer simulations) of research into various efficient (time and frequency domain) speech encoders operating at a transmission bit rate of 16 Kbps. In the time domain, Adaptive Differential Pulse Code Modulation (ADPCM) systems employing both forward and backward adaptive prediction were examined. A number of algorithms were proposed and evaluated, including several variants of the Stochastic Approximation Predictor (SAP). A Backward Block Adaptive (BBA) predictor was also developed and found to outperform the conventional stochastic methods, even though its complexity in terms of signal processing requirements is lower. A simplified Adaptive Predictive Coder (APC) employing a single tap pitch predictor considered next provided a slight improvement in performance over ADPCM, but with rather greater complexity. The ultimate test of any speech coding system is the perceptual performance of the received speech. Recent research has indicated that this may be enhanced by suitable control of the noise spectrum according to the theory of auditory masking. Various noise shaping ADPCM configurations were examined, and it was demonstrated that a proposed pre-/post-filtering arrangement which exploits advantageously the predictor-quantizer interaction, leads to the best subjective performance in both forward and backward prediction systems. Adaptive quantization is instrumental to the performance of ADPCM systems. Both the forward adaptive quantizer (AQF) and the backward oneword memory adaptation (AQJ) were examined. In addition, a novel method of decreasing quantization noise in ADPCM-AQJ coders, which involves the application of correction to the decoded speech samples, provided reduced output noise across the spectrum, with considerable high frequency noise suppression. More powerful (and inevitably more complex) frequency domain speech coders such as the Adaptive Transform Coder (ATC) and the Sub-band Coder (SBC) offer good quality speech at 16 Kbps. To reduce complexity and coding delay, whilst retaining the advantage of sub-band coding, a novel transform based split-band coder (TSBC) was developed and found to compare closely in performance with the SBC. To prevent the heavy side information requirement associated with a large number of bands in split-band coding schemes from impairing coding accuracy, without forgoing the efficiency provided by adaptive bit allocation, a method employing AQJs to code the sub-band signals together with vector quantization of the bit allocation patterns was also proposed. Finally, 'pipeline' methods of bit allocation and step size estimation (using the Fast Fourier Transform (FFT) on the input signal) were examined. Such methods, although less accurate, are nevertheless useful in limiting coding delay associated with SRC schemes employing Quadrature Mirror Filters (QMF)

A study of data coding technology developments in the 1980-1985 time frame, volume 2

The source parameters of digitized analog data are discussed. Different data compression schemes are outlined and analysis of their implementation are presented. Finally, bandwidth compression techniques are given for video signals

Differential encoding techniques applied to speech signals

The increasing use of digital communication systems has produced a continuous search for efficient methods of speech encoding. This thesis describes investigations of novel differential encoding systems. Initially Linear First Order DPCM systems employing a simple delayed encoding algorithm are examined. The systems detect an overload condition in the encoder, and through a simple algorithm reduce the overload noise at the expense of some increase in the quantization (granular) noise. The signal-to-noise ratio (snr) performance of such d codec has 1 to 2 dB's advantage compared to the First Order Linear DPCM system. In order to obtain a large improvement in snr the high correlation between successive pitch periods as well as the correlation between successive samples in the voiced speech waveform is exploited. A system called "Pitch Synchronous First Order DPCM" (PSFOD) has been developed. Here the difference Sequence formed between the samples of the input sequence in the current pitch period and the samples of the stored decoded sequence from the previous pitch period are encoded. This difference sequence has a smaller dynamic range than the original input speech sequence enabling a quantizer with better resolution to be used for the same transmission bit rate. The snr is increased by 6 dB compared with the peak snr of a First Order DPCM codea. A development of the PSFOD system called a Pitch Synchronous Differential Predictive Encoding system (PSDPE) is next investigated. The principle of its operation is to predict the next sample in the voiced-speech waveform, and form the prediction error which is then subtracted from the corresponding decoded prediction error in the previous pitch period. The difference is then encoded and transmitted. The improvement in snr is approximately 8 dB compared to an ADPCM codea, when the PSDPE system uses an adaptive PCM encoder. The snr of the system increases further when the efficiency of the predictors used improve. However, the performance of a predictor in any differential system is closely related to the quantizer used. The better the quantization the more information is available to the predictor and the better the prediction of the incoming speech samples. This leads automatically to the investigation in techniques of efficient quantization. A novel adaptive quantization technique called Dynamic Ratio quantizer (DRQ) is then considered and its theory presented. The quantizer uses an adaptive non-linear element which transforms the input samples of any amplitude to samples within a defined amplitude range. A fixed uniform quantizer quantizes the transformed signal. The snr for this quantizer is almost constant over a range of input power limited in practice by the dynamia range of the adaptive non-linear element, and it is 2 to 3 dB's better than the snr of a One Word Memory adaptive quantizer. Digital computer simulation techniques have been used widely in the above investigations and provide the necessary experimental flexibility. Their use is described in the text

Speech Signal Representation Through Digital Signal Processing Techniques

This paper addresses several different signal processing methods for representing speech signals. Some of the techniques that are discussed include time domain coding which uses pulse-code, differential, or delta modulating methods. Also presented are frequency domain techniques such as sub-band coding and adaptive transform coding. In addition, this paper will discuss representing speech signals through source coding techniques via vocoders. A comparison of these different signal representation methods is included

Recent Advances in Steganography

Steganography is the art and science of communicating which hides the existence of the communication. Steganographic technologies are an important part of the future of Internet security and privacy on open systems such as the Internet. This book's focus is on a relatively new field of study in Steganography and it takes a look at this technology by introducing the readers various concepts of Steganography and Steganalysis. The book has a brief history of steganography and it surveys steganalysis methods considering their modeling techniques. Some new steganography techniques for hiding secret data in images are presented. Furthermore, steganography in speeches is reviewed, and a new approach for hiding data in speeches is introduced

Survey of error concealment schemes for real-time audio transmission systems

This thesis presents an overview of the main strategies employed for error detection and error concealment in different real-time transmission systems for digital audio. The “Adaptive Differential Pulse-Code Modulation (ADPCM)”, the “Audio Processing Technology Apt-x100”, the “Extended Adaptive Multi-Rate Wideband (AMR-WB+)”, the “Advanced Audio Coding (AAC)”, the “MPEG-1 Audio Layer II (MP2)”, the “MPEG-1 Audio Layer III (MP3)” and finally the “Adaptive Transform Coder 3 (AC3)” are considered. As an example of error management, a simulation of the AMR-WB+ codec is included. The simulation allows an evaluation of the mechanisms included in the codec definition and enables also an evaluation of the different bit error sensitivities of the encoded audio payload.Ingeniería Técnica en Telemátic

Non-intrusive identification of speech codecs in digital audio signals

Speech compression has become an integral component in all modern telecommunications networks. Numerous codecs have been developed and deployed for efficiently transmitting voice signals while maintaining high perceptual quality. Because of the diversity of speech codecs used by different carriers and networks, the ability to distinguish between different codecs lends itself to a wide variety of practical applications, including determining call provenance, enhancing network diagnostic metrics, and improving automated speaker recognition. However, few research efforts have attempted to provide a methodology for identifying amongst speech codecs in an audio signal. In this research, we demonstrate a novel approach for accurately determining the presence of several contemporary speech codecs in a non-intrusive manner. The methodology developed in this research demonstrates techniques for analyzing an audio signal such that the subtle noise components introduced by the codec processing are accentuated while most of the original speech content is eliminated. Using these techniques, an audio signal may be profiled to gather a set of values that effectively characterize the codec present in the signal. This procedure is first applied to a large data set of audio signals from known codecs to develop a set of trained profiles. Thereafter, signals from unknown codecs may be similarly profiled, and the profiles compared to each of the known training profiles in order to decide which codec is the best match with the unknown signal. Overall, the proposed strategy generates extremely favorable results, with codecs being identified correctly in nearly 95% of all test signals. In addition, the profiling process is shown to require a very short analysis length of less than 4 seconds of audio to achieve these results. Both the identification rate and the small analysis window represent dramatic improvements over previous efforts in speech codec identification

Perceptual models in speech quality assessment and coding

The ever-increasing demand for good communications/toll quality speech has created a renewed interest into the perceptual impact of rate compression. Two general areas are investigated in this work, namely speech quality assessment and speech coding. In the field of speech quality assessment, a model is developed which simulates the processing stages of the peripheral auditory system. At the output of the model a "running" auditory spectrum is obtained. This represents the auditory (spectral) equivalent of any acoustic sound such as speech. Auditory spectra from coded speech segments serve as inputs to a second model. This model simulates the information centre in the brain which performs the speech quality assessment. [Continues.