Towards quantification of condition monitoring benefit for wind turbine generators

Condition monitoring systems are increasingly installed in wind turbine generators with the goal of providing component-specific information to the wind farm operator and hence increase equipment availability through maintenance and operating actions based on this information. In some cases, however, the economic benefits of such systems are unclear. A quantitative measure of these benefits may therefore be of value to utilities and O&M groups involved in planning and operating wind farm installations. The development of a probabilistic model based on discrete-time Markov Chain solved via Monte Carlo methods to meet these requirements is illustrated. Potential value is demonstrated through case study simulations

Condition Monitoring and Fault Diagnosis in Wind Energy Conversion Systems: A Review

International audienceThere is a constant need for the reduction of operational and maintenance costs of Wind Energy Conversion Systems (WECS). The most efficient way of reducing these costs would be to continuously monitor the condition of these systems. This allows for early detection of the degeneration of the generator health, facilitating a proactive response, minimizing downtime, and maximizing productivity. Wind generators are also inaccessible since they are situated on extremely high towers, which are normally 20 m or greater in height. There are also plans to increase the number of offshore sites increasing the need for a remote means of WECS monitoring that eliminates some of the difficulties faced due to accessibility problems. Therefore and due to the importance of condition monitoring and fault diagnosis in WECS (blades, drive trains, and generators); and keeping in mind the need for future research, this paper is intended as a tutorial overview based on a review of the state of the art, describing different type of faults, their generated signatures, and their diagnostic schemes

A brief status on condition monitoring and fault diagnosis in wind energy conversion systems

International audienceThere is a constant need for the reduction of operational and maintenance costs of Wind Energy Conversion Systems (WECSs). The most efficient way of reducing these costs would be to continuously monitor the condition of these systems. This allows for early detection of the degeneration of the generator health, facilitating a proactive response, minimizing downtime, andmaximizing productivity. Wind generators are also inaccessible since they are situated on extremely high towers, which are normally 20 mor more in height. There are also plans to increase the number of offshore sites increasing the need for a remote means of WECS monitoring that eliminates some of the difficulties faced due to accessibility problems. Therefore and due to the importance of conditionmonitoring and fault diagnosis in WECS (blades, drive trains, and generators), and keeping in mind the need for future research, this paper is intended as a brief status describing different types of faults, their generated signatures, and their diagnostic schemes

Response Analysis and Comparison of a Spar-Type Floating Offshore Wind Turbine and an Onshore Wind Turbine under Blade Pitch Controller Faults

This paper analyses the effects of three pitch controller faults on the responses of an onshore wind turbine and a spar-type offshore floating wind turbine. These faults include: a stuck blade pitch actuator, a fixed value fault and a bias fault of the blade pitch sensor. The faults are modeled in the controller dynamic link library and a short-term extreme response analysis is performed using the HAWC2 simulation tool. The main objectives of this paper are to investigate how different faults affect the performance of wind turbines for condition monitoring purposes and which differences exist in the structural responses between onshore and offshore floating wind turbines. Statistical analysis of the selected response parameters are conducted using the six 1-hour stochastic samples for each load case. For condition monitoring purpose, the effects of faults on the responses at different wind speeds and fault amplitudes are investigated by comparing the same response under normal operation. The severities of the individual faults are categorized by the extreme values of structural loads and the structural components are sorted based on the magnitude of the fault effects on the extreme values. The pitch sensor fixed value fault is determined as the most severe fault case and the shaft appears as the structural component that experiences the highest risk. The effects of fault conditions on the offshore floating and the onshore wind turbines are compared to investigate the potential differences. The results show that faults cause more damage to the tower and the yaw bearing for the onshore wind turbine and more damage to the shaft for the offshore floating wind turbine

Effective algorithms for real-time wind turbine condition monitoring and fault-detection

Reliable condition monitoring (CM) can be an effective means to significantly reduce wind turbine (WT) downtime, operations and maintenance costs and plan preventative maintenance in advance. The WT generator voltage and current output, if sampled at a sufficiently high rate (kHz range), can provide a rich source of data for CM. However, the electrical output of the WT generator is frequently shown to be complex and noisy in nature due to the varying and turbulent nature of the wind. Thus, a fully satisfactory technique that is capable to provide accurate interpretation of the WT electrical output has not been achieved to date. The objective of the research described in this thesis is to develop reliable WT CM using advanced signal processing techniques so that fast analysis of non-stationary current measurements with high diagnostic accuracy is achieved. The diagnostic accuracy and reliability of the proposed techniques have been evaluated using data from a laboratory test rig where experiments are performed under two levels of rotor electrical asymmetry faults. The experimental test rig was run under fixed and variable speed driving conditions to investigate the kind of results expected under such conditions. An effective extended Kalman filter (EKF) based method is proposed to iteratively track the characteristic fault frequencies in WT CM signals as the WT speed varies. The EKF performance was compared with some of the leading WT CM techniques to establish its pros and cons. The reported experimental findings demonstrate clear and significant gains in both the computational efficiency and the diagnostic accuracy using the proposed technique. In addition, a novel frequency tracking technique is proposed in this thesis to analyse the non-stationary current signals by improving the capability of a continuous wavelet transform (CWT). Simulations and experiments have been performed to verify the proposed method for detecting early abnormalities in WT generators. The improved CWT is finally applied for developing a new real-time CM technique dedicated to detect early abnormalities in a commercial WT. The results presented highlight the advantages of the improved CWT over the conventional CWT to identify frequency components of interest and cope with the non-linear and non-stationary fault features in the current signal, and go on to indicate its potential and suitability for WT CM.</div

New Tendencies in Wind Energy Operation and Maintenance

[Abstract] Both the reduction in operating and maintenance (O&M) costs and improved reliability have become top priorities in wind turbine maintenance strategies. O&M costs typically account for 20% to 25% of the total levelized cost of electricity (LCOE) of current wind power systems. This paper provides a general review of the state of the art of research conducted on wind farm maintenance in recent years. It shows the new methods and techniques, focusing on trends and future challenges. In addition to this, this work includes a review of the following items: (i) operation and maintenance, (ii) failure rate, (iii) reliability, (iv) condition monitoring, (v) maintenance strategies, (vi) maintenance and life cycle and (vii) maintenance optimization As for offshore wind turbines, it is crucial to limit the maximum faults, since the maintenance of these wind farms is more complex both technically and logistically. Research into wind farm maintenance increased by 87% between 2007 and 2019, with more than 38,000 papers (Scopus) including “wind energy” as the main topic and some keywords related to O&M costs. The LCOE in onshore wind projects has decreased by 45%, while in offshore projects it has decreased by 28%. The O&M costs of onshore wind projects fell 52%, while in the case of offshore projects, they have declined 45%. Thus, the results obtained in this paper suggest that there is a change in research on wind farm operation and maintenance, as in recent years, scientific interest in failure has been increasing, while interest in the various techniques of wind farm maintenance and operation has been decreasing.This research was funded by the University of A Coruña (Spain) (Grant No. 64900)

Langley aerospace test highlights, 1985

The role of the Langley Research Center is to perform basic and applied research necessary for the advancement of aeronautics and space flight, to generate new and advanced concepts for the accomplishment of related national goals, and to provide research advice, technological support, and assistance to other NASA installations, other government agencies, and industry. Significant tests which were performed during calendar year 1985 in Langley test facilities, are highlighted. Both the broad range of the research and technology activities at the Langley Research Center and the contributions of this work toward maintaining United States leadership in aeronautics and space research, are illustrated. Other highlights of Langley research and technology for 1985 are described in Research and Technology-1985 Annual Report of the Langley Research Center