Quantifying the influence of crosstalk-crosstalk beat noise in optical DPSK systems

In-band crosstalk, due to multiple interferers, is one of the most severe physical impairments in optical transparent networks. Differential phase-shift keying (DPSK) has been identified as an attractive modulation scheme to be used in such environments due to its robustness to in-band crosstalk. At the output of the receiver photodiode, which is assumed to behave as a square law device, the in-band crosstalk interferes with the signal, resulting in the signal-crosstalk beat noise and the crosstalk-crosstalk beat noise. Usually this last noise contribution is neglected, but in this paper the impact of the crosstalk-crosstalk beating terms is considered and quantified. It is concluded that these terms have a growing influence as the optical signal-to-noise ratio (OSNR) value increases.info:eu-repo/semantics/acceptedVersio

Impact of in-band crosstalk on the performance of optical coherent detection communication systems

A detecção óptica coerente leva à coexistência de sinais com diferentes formatos de modulação e diferentes ritmos binários nas redes ópticas. Devido a essa coexistência vários cenários de diafonia homódina (in-band crosstalk) são possíveis. Neste trabalho, o impacto do in-band crosstalk devido a sinais interferentes com o for- mato de modulação em amplitude em quadratura (M-QAM) no desempenho do PDM-QPSK e PDM-16-QAM receptores coerentes a um ritmo binário agregado de 100 Gbps é estudado utilizando simulação Monte-Carlo. A precisão do método de magnitude do vector de erro (EVM) também é investigado na presença de in-band crosstalk, e revelou ser suficientemente preciso na estimação o nível de interferência que leva a uma penalidade de 1 dB na relação sinal-ruído óptico (OSNR) no receptor. No entanto, a precisão do método EVM foi dimin- uída, relativamente à estimativa da penalidade na OSNR devido a níveis de in-band crosstalk mais elevados. A influência do factor de duração de ciclo, do desalinhamento temporal e da diferença de fase entre o sinal interferência e o sinal seleccionado no desempenho do receptor é também avaliada. Mostra-se que o sinal QPSK com um factor de duração de ciclo de 33% é, em geral, o sinal seleccionado mais tolerante ao in-band crosstalk e o interferente menos prejudicial para o desempenho do receptor coerente. Mostramos também que o desalin- hamento temporal tem uma influência significativa no impacto do in-band crosstalk no desempenho do receptor coerente, quando o factor de duração de ciclo dos interferente ou do sinal seleccionado são baixos, e a diferença de fase tem impacto quase desprezável na variação da penalidade de OSNR.Optical coherent technology leads to the coexistence of signals with different modulation formats and different bit rates in optical networks. Due to this coexistence several in-band crosstalk scenarios are possible. In this work, the impact of in-band crosstalk due to M-ary quadrature amplitude modulation (M-QAM) interferers on the performance of PDM-QPSK and PDM-16-QAM coherent receivers at an aggregated bit rate of 100 Gbps is studied using Monte Carlo simulation. The accuracy of the error vector magnitude method is also investigated in presence of in-band crosstalk and it revealed to be sufficiently accurate for the estimation of the crosstalk level that leads to a 1 dB Optical Signal-to-Noise ratio (OSNR) penalty at the receiver. However, the EVM method accuracy was diminished, concerning the estimation of the OSNR penalty due to higher crosstalk levels. The influence of the duty-cycle, time misalignment and phase difference between interferers and selected signal on the receiver performance is also assessed. We show that the QPSK signal with a duty-cycle of 33% is, generally, the most tolerant selected signal to in-band crosstalk and the less detrimental interferer to the coher- ent receiver performance. We also show that the time misalignment has a significant influence on the in-band crosstalk impact, when the duty-cycles of the interferers or selected signal are low, and the phase difference has almost negligible impact on the OSNR penalty variation

Estimation of the OSNR penalty due to in-band crosstalk on the performance of virtual carrier-assisted metropolitan OFDM systems

The impact of the in-band crosstalk on the performance of virtual carrier (VC)-assisted direct detection (DD) multi-band orthogonal frequency division multiplexing (MB-OFDM) systems was numerically assessed via Monte-Carlo simulations, by means of a single interferer and 4-ary, 16-ary and 64-ary quadrature amplitude modulation (QAM) formats in the OFDM subcarriers. It was also investigated the influences of the virtual carrier-to-band power ratio (VBPR) and the virtual carrier-to-band gap (VBG) on the DD in-band crosstalk tolerance of the OFDM receiver. It was shown the modulation format order decrease enhances the tolerance to in-band crosstalk. When the VBG is the same for both interferer and selected signal, the interferer VBPR increase is seen to lead to lower optical signal-to-noise ratio (OSNR) penalties due to in-band crosstalk. Considering that the VCs frequencies of the selected and interferer OFDM signals are equal, the increase of the interferer VBG also gives rise to lower OSNR penalties. When the interferer and selected signals bands central frequencies are the same, the change of interferer VBG can attain 11 dB less tolerance to in-band crosstalk of the VC-assisted DD OFDM system. We also evaluate the error vector magnitude (EVM) accuracy of the in-band crosstalk tolerance of the DD OFDM receiver and our results show that the EVM estimations are inaccurate.info:eu-repo/semantics/acceptedVersio

Photonic Integrated Semiconductor Optical Amplifier Switch Circuits

No abstract

Feed-forward linearisation of a directly modulated semiconductor laser and broadband millimetre-wave wireless over fibre systems.

This thesis is concerned with reduction of non-linear distortion in a directly modulated uncooled semiconductor laser using feed-forward compensation and investigating the performance of broadband millimetre-wave wireless over fibre systems. One of the key elements that determine the performance in a fibre optic link is the linearity of the optical source. Direct modulation of an uncooled semiconductor laser diode is a simple and cost effective solution. However, the distortion and noise generated by the laser limit the achievable dynamic range and performance in a system. Feed-forward linearisation is demonstrated at 5 GHz, the highest operating frequency reported, with 26 dB third order intermodulation distortion suppression and simultaneous noise reduction leading to enhanced spurious free dynamic range of 107 dB (1Hz). The effectiveness of feed-forward in a multi-channel system is investigated. Laser non-linearity can cause spectral re-growth and interchannel distortion that can completely mask the adjacent channel. A significant 11 dB interchannel distortion suppression and 10.5 dB power advantage is obtained compared to the non-linearised case. These results suggest that feed-forward linearisation arrangement can make a practical multi-channel or multi-operator wireless over fibre system. In the second part of this thesis the first experimental transmission of wireless data over fibre with remote millimetre-wave local oscillator delivery using a bi-directional semiconductor optical amplifier in a full duplex system with 2.2 km coarse wavelength division multiplexing fibre ring architecture is demonstrated. The use of bi-directional SOAs in place of unidirectional erbium doped fibre amplifier or unidirectional SOAs, together with the use of CWDM and optical distribution of the local oscillator signal allow substantial reduction in overall complexity and cost. Successful transmission of data over 12.8 km fibre is achieved with clear and well defined constellations and eye diagrams as well as 10.5% and 7.8 % error vector magnitude values for the downlink and uplink directions, respectively. The thesis also presents an implementation and performance of a millimetre-wave gigabit wireless over fibre system. CWDM devices such as uncooled laser diodes and passive components are used for the first time in a gigabit system allowing cost savings compared to dense WDM. This makes such solutions more attractive for millimetre-wave access systems. Optically modulated gigabit wireless data signals to and from the base stations are distributed at 5 GHz and up-converted using a remotely delivered LO source. Eye diagrams and bit error rate are measured to assess the system performance

Hybrid fibre and free-space optical solutions in optical access networks

This thesis evaluates the potentials of hybrid fibre and free space optical (FSO) communications access networks in providing a possible solution to an all optical access network. In such network architectures, the FSO link can extend the system to areas where an optical fibre link is not feasible, and/or provide limited mobility for indoor coverage. The performance of hybrid fibre and FSO (HFFSO) networks based on digital pulse position modulation (DPPM), for both the indoor and outdoor environments of the optical access network, are compared with the performance of such a network that is based on conventional on-off keying non-return-to-zero (OOK NRZ) modulation using results obtained through computational and analytical modelling. Wavelength division multiplexing (WDM) and/or code division multiple access (CDMA) are incorporated into the network for high speed transmission and/or network scalability. The impacts of optical scintillation, beam spreading and coupling losses, multiple access interference (MAI), linear optical crosstalk and amplified spontaneous emission noise (ASE) on the performance of hybrid fibre and FSO (HFFSO) access networks are analysed, using performance evaluation methods based on simple Gaussian approximation (GA) and more complex techniques based on moment generating function (MGF), including the Chernoff bound (CB), modified Chernoff bound (MCB) and saddlepoint approximation (SPA). Results in the form of bit error rate (BER), power penalty, required optical power and outage probability are presented, and both the CB and MCB, which are upper bounds, are suggested as safer methods of assessing the performance of practical systems. The possibility of using a CDMA-based HFFSO network to provide high speed optical transmission coverage in an indoor environment is investigated. The results show a reduction in transmit power of mobile devices of about 9 – 20 dB (depending on number of active users) when an optical amplifier is used in the system compared to a non-amplified system, and up to 2.8 dB improvement over OOK NRZ receiver sensitivity is provided by a DPPM system using integrate and compare circuitry for maximum likelihood detection, and at coding level of two, for minimum bandwidth utilization. Outdoor HFFSO networks using only WDM, and incorporating CDMA with WDM, are also investigated. In the presence of atmospheric scintillations, an OOK system is required (for optimum performance) to continuously adapt its decision threshold to the fluctuating instantaneous irradiance. This challenge is overcome by using the maximum likelihood detection DPPM system, and necessitated the derivation of an interchannel crosstalk model for WDM DPPM systems. It is found that optical scintillation worsens the effect of interchannel crosstalk in outdoor HFFSO WDM systems, and results in error floors particularly in the upstream transmission, which are raised when CDMA is incorporated into the system, because of MAI. In both outdoor HFFSO networks (with WDM only and with WDM incorporating CDMA), the optical amplifier is found necessary in achieving acceptable BER, and with a feeder fibre of 20 km and distributive FSO link length of 1500 m, high speed broadband services can be provided to users at safe transmit power at all turbulence levels in clear air atmosphere

Hybrid fibre and free-space optical solutions in optical access networks

This thesis evaluates the potentials of hybrid fibre and free space optical (FSO) communications access networks in providing a possible solution to an all optical access network. In such network architectures, the FSO link can extend the system to areas where an optical fibre link is not feasible, and/or provide limited mobility for indoor coverage. The performance of hybrid fibre and FSO (HFFSO) networks based on digital pulse position modulation (DPPM), for both the indoor and outdoor environments of the optical access network, are compared with the performance of such a network that is based on conventional on-off keying non-return-to-zero (OOK NRZ) modulation using results obtained through computational and analytical modelling. Wavelength division multiplexing (WDM) and/or code division multiple access (CDMA) are incorporated into the network for high speed transmission and/or network scalability. The impacts of optical scintillation, beam spreading and coupling losses, multiple access interference (MAI), linear optical crosstalk and amplified spontaneous emission noise (ASE) on the performance of hybrid fibre and FSO (HFFSO) access networks are analysed, using performance evaluation methods based on simple Gaussian approximation (GA) and more complex techniques based on moment generating function (MGF), including the Chernoff bound (CB), modified Chernoff bound (MCB) and saddlepoint approximation (SPA). Results in the form of bit error rate (BER), power penalty, required optical power and outage probability are presented, and both the CB and MCB, which are upper bounds, are suggested as safer methods of assessing the performance of practical systems. The possibility of using a CDMA-based HFFSO network to provide high speed optical transmission coverage in an indoor environment is investigated. The results show a reduction in transmit power of mobile devices of about 9 – 20 dB (depending on number of active users) when an optical amplifier is used in the system compared to a non-amplified system, and up to 2.8 dB improvement over OOK NRZ receiver sensitivity is provided by a DPPM system using integrate and compare circuitry for maximum likelihood detection, and at coding level of two, for minimum bandwidth utilization. Outdoor HFFSO networks using only WDM, and incorporating CDMA with WDM, are also investigated. In the presence of atmospheric scintillations, an OOK system is required (for optimum performance) to continuously adapt its decision threshold to the fluctuating instantaneous irradiance. This challenge is overcome by using the maximum likelihood detection DPPM system, and necessitated the derivation of an interchannel crosstalk model for WDM DPPM systems. It is found that optical scintillation worsens the effect of interchannel crosstalk in outdoor HFFSO WDM systems, and results in error floors particularly in the upstream transmission, which are raised when CDMA is incorporated into the system, because of MAI. In both outdoor HFFSO networks (with WDM only and with WDM incorporating CDMA), the optical amplifier is found necessary in achieving acceptable BER, and with a feeder fibre of 20 km and distributive FSO link length of 1500 m, high speed broadband services can be provided to users at safe transmit power at all turbulence levels in clear air atmosphere

Quasi-lossless data transmission with ultra-long Raman fibre laser based amplification

The project consists of an experimental and numerical modelling study of the applications of ultra-long Raman fibre laser (URFL) based amplification techniques for high-speed multi-wavelength optical communications systems. The research is focused in telecommunications C-band 40 Gb/s transmission data rates with direct and coherent detection. The optical transmission performance of URFL based systems in terms of optical noise, gain bandwidth and gain flatness for different system configurations is evaluated. Systems with different overall span lengths, transmission fibre types and data modulation formats are investigated. Performance is compared with conventional Erbium doped fibre amplifier based system to evaluate system configurations where URFL based amplification provide performance or commercial advantages

Optical Communication

Optical communication is very much useful in telecommunication systems, data processing and networking. It consists of a transmitter that encodes a message into an optical signal, a channel that carries the signal to its desired destination, and a receiver that reproduces the message from the received optical signal. It presents up to date results on communication systems, along with the explanations of their relevance, from leading researchers in this field. The chapters cover general concepts of optical communication, components, systems, networks, signal processing and MIMO systems. In recent years, optical components and other enhanced signal processing functions are also considered in depth for optical communications systems. The researcher has also concentrated on optical devices, networking, signal processing, and MIMO systems and other enhanced functions for optical communication. This book is targeted at research, development and design engineers from the teams in manufacturing industry, academia and telecommunication industries