4D flow imaging of the thoracic aorta: is there an added clinical value?

Four-dimensional (4D) flow MRI has emerged as a powerful non-invasive technique in cardiovascular imaging, enabling to analyse in vivo complex flow dynamics models by quantifying flow parameters and derived features. Deep knowledge of aortic flow dynamics is fundamental to better understand how abnormal flow patterns may promote or worsen vascular diseases. In the perspective of an increasingly personalized and preventive medicine, growing interest is focused on identifying those quantitative functional features which are early predictive markers of pathological evolution. The thoracic aorta and its spectrum of diseases, as the first area of application and development of 4D flow MRI and supported by an extensive experimental validation, represents the ideal model to introduce this technique into daily clinical practice. The purpose of this review is to describe the impact of 4D flow MRI in the assessment of the thoracic aorta and its most common affecting diseases, providing an overview of the actual clinical applications and describing the potential role of derived advanced hemodynamic measures in tailoring follow-up and treatment

Development of a novel uncovered stent system for the management of complex aortic aneurysms

Endovascular aortic repair (EVAR) is a minimally invasive alternative to open surgery for the treatment of aortic aneurysms (AA). However, standard EVAR is not applicable to complex AA with involvement of vital branches, which could be occluded by the endograft. As an emerging technique, the concept of multiple overlapping uncovered stents (MOUS) have been proposed to manage complex lesions. MOUS was used to modulate the flow pattern inside the aneurysm sac, and promote the thrombus formation followed by the aneurysm shrinkage. In this dissertation, we sought to investigate the mechanism of MOUS-induced flow modulation and key factors associated with the success of this novel technique: - The mechanical behaviour of AA was characterised by uniaxial material tests (Chapter 4). A Bayesian framework was proposed for material constants identification. They were found correlated to the microstructure of tissue fibre network and were capable in differentiating tissue types. - Solid-to-solid interaction and one-way fluid-solid interaction (FSI) analysis was performed based on patient-specific computer tomography angiography (Chapters 5&6). Structural stress concentrations were observed within the landing zones, which increased with the number of stents deployed. In the parameter studies (Chapter 6), the overall porosity was identified as the dominant factor of the flow-diverting outcome, while cross-stent structures of MOUS had limited influence. - The pathological effect of structural stress concentration induced by an implanted device was further studied in rabbit models (Chapter 7). The wall structural stress and fluid shear stress were obtained from FSI analysis based on magnetic resonance imaging (MRI), and correlated to plaque characteristics. Both high structural stress and low fluid shear stress were found correlated to plaque initialisation and increased inflammation. Overall, MOUS modulates the blood flow with robust performance under different overlapping patterns. Image-based biomechanical analysis can optimise MOUS design and can contribute to personalised pre-surgery planning.Shuo Wang was sponsored by China Scholarship Council (2014-2018)

Optimization of CT scanning protocol of Type B aortic dissection follow-up through 3D printed model

This research aims to develop and evaluate a human tissue-like material 3D printed model used as a phantom in determining optimized scanning parameters to reduce the radiation dose for Type B aortic dissection patients after thoracic endovascular aortic repair. The results show that radiation risk for follow-up Type B aortic dissection patients can be potentially reduced. Further, the value of using 3D printed model in studying CT scanning protocols was further validated

Apport de l'assistance par ordinateur lors de la pose d'endoprothèse aortique

The development of endovascular aortic procedures is growing. These mini-invasive techniques allow a reduction of surgical trauma, usually important in conventional open surgery. The technical limitations of endovascular repair are pushed to special aortic localizations which were in the past decade indication for open repair. Success and efficiency of such procedures are based on the development and the implementation of decision-making tools. This work aims to improve endovascular procedures thanks to a better utilization of pre and intraoperative imaging. This approach is in the line with the framework of computer-assisted surgery whose concepts are applied to vascular surgery. The optimization of endograft deployment is considered in three steps. The first part is dedicated to preoperative imaging analysis and shows the limits of the current sizing tools. The accuracy of a new measurement criterion is assessed (outer curvature length). The second part deals with intraoperative imaging and shows the contribution of augmented reality in endovascular aortic repair. In the last part, image guided surgery on soft tissues is addressed, especially the arterial deformations occurring during endovascular procedures which disprove rigid registration in fusion imaging. The use of finite element simulation to deal with this issue is presented. We report an original approach based on a predictive model of deformations using finite element simulation with geometrical and anatomo-mechanical patient specific parameters extracted from the preoperative CT-scan.Les techniques endovasculaires, particulièrement pour l’aorte, sont en plein essor en chirurgie vasculaire. Ces techniques mini-invasives permettent de diminuer l’agression chirurgicale habituellement importante lors de la chirurgie conventionnelle. Les limites techniques sont repoussées à certaines localisations de l’aorte qui étaient il y a encore peu de temps inaccessibles aux endoprothèses. Le succès et l’efficience de ces interventions reposent en partie sur l'élaboration et la mise en œuvre de nouveaux outils d'aide à la décision. Ce travail entend contribuer à l’amélioration des procédures interventionnelles aortiques grâce à une meilleure exploitation de l’imagerie pré et peropératoire. Cette démarche s’inscrit dans le cadre plus général des Gestes Médico-Chirurgicaux Assistés par Ordinateur, dont les concepts sont revisités pour les transposer au domaine de la chirurgie endovasculaire. Trois axes sont développés afin de sécuriser et optimiser la pose d'endoprothèse. Le premier est focalisé sur l’analyse préopératoire du scanner (sizing) et montre les limites des outils de mesure actuels et évalue la précision d’un nouveau critère de mesure des longueurs de l’aorte (courbure externe). Le deuxième axe se positionne sur le versant peropératoire et montre la contribution de la réalité augmentée dans la pose d’une endoprothèse aortique. Le troisième axe s’intéresse au problème plus général des interventions sur les tissus mous et particulièrement aux déformations artérielles qui surviennent au cours des procédures interventionnelles qui mettent en défaut le recalage rigide lors de la fusion d’images. Nous présentons une approche originale basée sur un modèle numérique de prédiction des déformations qui utilise la simulation par éléments finis en y intégrant des paramètres géométriques et anatomo-mécaniques spécifique-patient extraits du scanner préopératoire

Diagnosis and Treatment of Abdominal and Thoracic Aortic Aneurysms Including the Ascending Aorta and the Aortic Arch

This book considers diagnosis and treatment of abdominal and thoracic aortic aneurysms. It addresses vascular and cardiothoracic surgeons and interventional radiologists, but also anyone engaged in vascular medicine. The book focuses amongst other things on operations in the ascending aorta and the aortic arch. Surgical procedures in this area have received increasing attention in the last few years and have been subjected to several modifications. Especially the development of interventional radiological endovascular techniques that reduce the invasive nature of surgery as well as complication rates led to rapid advancements. Thoracoabdominal aortic aneurysm (TAAA) repair still remains a challenging operation since it necessitates extended exposure of the aorta and reimplantation of the vital aortic branches. Among possible postoperative complications, spinal cord injury (SCI) seems one of the most formidable morbidities. Strategies for TAAA repair and the best and most reasonable approach to prevent SCI after TAAA repair are presented

Morphologic evaluation of ruptured abdominal aortic aneurysm by 3D modeling

This thesis was created in Word and converted to PDF using Mac OS X 10.7.5 Quartz PDFContext.Abdominal aortic aneurysm (AAA) is defined as a dilatation of the abdominal aorta exceeding the normal diameter by more than 50%. The standard and widely used approach to assess AAA size is by measuring the maximal diameter (Dmax). Currently, the main predictors of rupture risk are the Dmax, sex, and the expansion rate of the aneurysm. Yet, Dmax has some limitations. AAAs of vastly different shapes may have the same maximal diameter. Dmax lacks sensitivity for rupture risk, especially among smaller AAAs. Thus, there is a need to evaluate the susceptibility of a given AAA to rupture on a patient-specific basis. We present the design concept and workflow of the AAA segmentation software developed at our institution. We describe the previous validation steps in which we evaluated the reproducibility of manual Dmax, compared software Dmax against manual Dmax, validated reproducibility of software Dmax and volume in cross-sectional and longitudinal studies for detection of AAA growth, and evaluated the reproducibility of software measurements in unenhanced computed tomographic angiography (CTA) and in the presence of stent-graft. In order to define new geometric features associated with rupture, we performed a case-control study in which we compared 63 cases with ruptured or symptomatic AAA and 94 controls with asymptomatic AAA. Univariate logistic regression analysis revealed 14 geometric indices associated with AAA rupture. In the multivariate logistic regression analysis, adjusting for Dmax and sex, the AAA with a higher bulge location and higher mean averaged surface area were associated with AAA rupture. Our preliminary results suggest that incorporating geometrical indices obtained by segmentation of CT shows a trend toward improvement of the classification accuracy of AAA with high rupture risk at CT over a traditional model based on Dmax and sex alone. Larger longitudinal studies are needed to verify the validity of the proposed model. Addition of flow and biomechanical simulations should be investigated to improve rupture risk prediction based on AAA modeling.Un anévrysme de l'aorte abdominale (AAA) est défini par une dilatation de plus de 50% par rapport au diamètre normal. La méthode standard et largement répandue pour mesurer la dimension d'un AAA consiste à mesurer le diamètre maximal (Dmax). Présentement, les principaux prédicteurs de risque de rupture sont le Dmax, le sexe et le taux d'expansion d'un anévrysme. Toutefois, le Dmax a certaines limitations. Des AAAs de formes très différentes peuvent avoir le même diamètre maximal. Le Dmax manque de sensibilité pour détecter le risque de rupture, en particulier pour les petits anévrysmes. Par conséquent, il y a un besoin d'évaluer de manière spécifique et individuelle la susceptibilité de rupture d'un AAA. Nous présentons le concept et le flux de travail d'un logiciel de segmentation des AAAs développé à notre institution. Nous décrivons les étapes antérieures de validation: évaluation de la reproductibilité du Dmax manuel, comparaison de Dmax par logiciel avec Dmax manuel, validation de la reproductibilité du Dmax et volume par logiciel dans des études transversale et longitudinale pour la détection de croissance et évaluation de la reproductibilité de mesures sur angiographie par tomodensitométrie et en présence d'endoprothèse. En vue d’identifier de nouveaux paramètres géométrique associés avec le risque de rupture, nous avons réalisé une étude cas-témoin comparant 63 cas avec AAA rompu ou symptomatique et 94 contrôles avec AAA asymptomatique. Une analyse de régression logistique univariée a identifié 14 indices géométriques associés avec une rupture de AAA. Dans l'analyse de régression logistique multivariée, en ajustant pour le Dmax et le sexe, les AAA avec un bombement plus haut situé et une surface moyenne plus élevée étaient associés à une rupture. Nos résultats préliminaires suggèrent que l'inclusion d'indices géométriques obtenus par segmentation de tomodensitométrie tend à améliorer la classification de AAA avec un risque de rupture par rapport à un modèle traditionnel seulement basé sur le Dmax et le sexe. De plus larges études longitudinales sont requises pour vérifier la validité du modèle proposé. Des simulations de flux et biomécaniques devraient être envisagées pour améliorer la prédiction du risque de rupture basée sur la modélisation d'anévrysmes

SURVEILLANCE FOLLOWING ENDOVASCULAR REPAIR OF ABDOMINAL AORTIC ANEURYSM

Introduction Endovascular Aneurysm Repair (EVAR) is the commonest form of repair of Abdominal Aortic Aneurysms (AAA). EVAR involves the placement of a stent-graft that seals into the arteries proximally and distally containing blood flow through the AAA. EVAR suffers from complications and treatment failures and patients are enrolled on a surveillance programme to identify these so corrective secondary intervention might be undertaken. Surveillance contributes significantly to the cost of treatment and is inefficient. Efficient surveillance requires adequate knowledge of the; nature and timing of complications, diagnostic merits of surveillance imaging, factors which limit patient compliance and ability to predict the risk of future complications. This work addresses deficiencies in these areas. Methods A database of a city wide vascular surgical service and surveillance imaging reports for 2008-15 were analysed under ethical approved. The nature / incidence of secondary interventions and degree of compliance with surveillance were reported using descriptive statistics and incidence. Association between patient factors and non-compliance were examined using adjusted odds ratios (AOR). Missing datapoints in imaging data were addressed using multiple imputation utilising chained equations. Surveillance imaging findings were assessed for association with subsequent secondary intervention using Kaplan-Myer plots, log rank test and AORs. AOR were calculated using multivariate models. A piecewise exponential model (PEM) was created to predict future risk of secondary intervention at different times following EVAR. This was internally validated using a bootstrapping technique and assessed using Hosmer–Lemeshow test and receiver operator characteristics (ROC). A prospective imaging study of Contrast Enhanced Ultrasound Scan (CEUS) and time-resolved Computer Tomography Angiography (tCTA) was undertaken, the diagnostic values of CEUS to diagnose a graft-related endoleak were obtained. Results A total of 2901 patient years of follow-up in 756 individuals were analysed. The intended purpose of the 178 secondary interventions was, 85(48%) maintaining distal perfusion and 93(52%) maintaining effective aneurysm treatment. The incidence of secondary interventions following EVAR varied at different stages of follow-up between approximately 35 and 60 interventions per 1000 patient years. Compliance was maintained above 95% until 10 years after EVAR. The factors most associated with compliance were; years after EVAR (AOR 0.62), calendar year EVAR performed (0.67), age at time (0.96) and previously undergone a secondary intervention (1.13). Evaluation of Colour Duplex Ultrasound Scan (CDUS) and Abdominal Radiography (AXR) findings demonstrated that reducing the number of collected findings did not lead to changes in the overall association with secondary intervention. Internal validation of the PEM model demonstrated an area under the curve of 0.72 (95% CI 0.68 – 0.76) on ROC analysis and Hosmer–Lemeshow test produced a median p-value of 0.51, demonstrating satisfactory discrimination and calibration. On blinded prospective study CEUS has a sensitivity of 0.56 (95% confidence interval 0.23 – 0.88) and specificity of 0.90 (0.78 – 1.00) to diagnose a graft related endoleak, with tCTA as the comparator standard. Conclusion This work demonstrates the changing epidemiology of secondary interventions after EVAR, that CDUS & AXR reporting can be simplified and those findings can be used to predict future risk of secondary interventions. Excellent compliance with EVAR surveillance is achievable and is associated with a small number of patient factors. Finally, CEUS is demonstrated to have poor graft related endoleak diagnostic values when compared to tCTA