Quality-Oriented Perceptual HEVC Based on the Spatiotemporal Saliency Detection Model

Perceptual video coding (PVC) can provide a lower bitrate with the same visual quality compared with traditional H.265/high efficiency video coding (HEVC). In this work, a novel H.265/HEVC-compliant PVC framework is proposed based on the video saliency model. Firstly, both an effective and efficient spatiotemporal saliency model is used to generate a video saliency map. Secondly, a perceptual coding scheme is developed based on the saliency map. A saliency-based quantization control algorithm is proposed to reduce the bitrate. Finally, the simulation results demonstrate that the proposed perceptual coding scheme shows its superiority in objective and subjective tests, achieving up to a 9.46% bitrate reduction with negligible subjective and objective quality loss. The advantage of the proposed method is the high quality adapted for a high-definition video application

Saliency-Enabled Coding Unit Partitioning and Quantization Control for Versatile Video Coding

The latest video coding standard, versatile video coding (VVC), has greatly improved coding efficiency over its predecessor standard high efficiency video coding (HEVC), but at the expense of sharply increased complexity. In the context of perceptual video coding (PVC), the visual saliency model that utilizes the characteristics of the human visual system to improve coding efficiency has become a reliable method due to advances in computer performance and visual algorithms. In this paper, a novel VVC optimization scheme compliant PVC framework is proposed, which consists of fast coding unit (CU) partition algorithm and quantization control algorithm. Firstly, based on the visual saliency model, we proposed a fast CU division scheme, including the redetermination of the CU division depth by calculating Scharr operator and variance, as well as the executive decision for intra sub-partitions (ISP), to reduce the coding complexity. Secondly, a quantization control algorithm is proposed by adjusting the quantization parameter based on multi-level classification of saliency values at the CU level to reduce the bitrate. In comparison with the reference model, experimental results indicate that the proposed method can reduce about 47.19% computational complexity and achieve a bitrate saving of 3.68% on average. Meanwhile, the proposed algorithm has reasonable peak signal-to-noise ratio losses and nearly the same subjective perceptual quality

Low-Complexity and Hardware-Friendly H.265/HEVC Encoder for Vehicular Ad-Hoc Networks

Real-time video streaming over vehicular ad-hoc networks (VANETs) has been considered as a critical challenge for road safety applications. The purpose of this paper is to reduce the computation complexity of high efficiency video coding (HEVC) encoder for VANETs. Based on a novel spatiotemporal neighborhood set, firstly the coding tree unit depth decision algorithm is presented by controlling the depth search range. Secondly, a Bayesian classifier is used for the prediction unit decision for inter-prediction, and prior probability value is calculated by Gibbs Random Field model. Simulation results show that the overall algorithm can significantly reduce encoding time with a reasonably low loss in encoding efficiency. Compared to HEVC reference software HM16.0, the encoding time is reduced by up to 63.96%, while the Bjontegaard delta bit-rate is increased by only 0.76–0.80% on average. Moreover, the proposed HEVC encoder is low-complexity and hardware-friendly for video codecs that reside on mobile vehicles for VANETs

CUQI: cardiac ultrasound video quality index

Medical images and videos are now increasingly part of modern telecommunication applications, including telemedicinal applications, favored by advancements in video compression and communication technologies. Medical video quality evaluation is essential for modern applications since compression and transmission processes often compromise the video quality. Several state-of-the-art video quality metrics used for quality evaluation assess the perceptual quality of the video. For a medical video, assessing quality in terms of "diagnostic" value rather than "perceptual" quality is more important. We present a diagnostic-quality-oriented video quality metric for quality evaluation of cardiac ultrasound videos. Cardiac ultrasound videos are characterized by rapid repetitive cardiac motions and distinct structural information characteristics that are explored by the proposed metric. Cardiac ultrasound video quality index, the proposed metric, is a full reference metric and uses the motion and edge information of the cardiac ultrasound video to evaluate the video quality. The metric was evaluated for its performance in approximating the quality of cardiac ultrasound videos by testing its correlation with the subjective scores of medical experts. The results of our tests showed that the metric has high correlation with medical expert opinions and in several cases outperforms the state-of-the-art video quality metrics considered in our tests

A computational model of visual attention.

Visual attention is a process by which the Human Visual System (HVS) selects most important information from a scene. Visual attention models are computational or mathematical models developed to predict this information. The performance of the state-of-the-art visual attention models is limited in terms of prediction accuracy and computational complexity. In spite of significant amount of active research in this area, modelling visual attention is still an open research challenge. This thesis proposes a novel computational model of visual attention that achieves higher prediction accuracy with low computational complexity. A new bottom-up visual attention model based on in-focus regions is proposed. To develop the model, an image dataset is created by capturing images with in-focus and out-of-focus regions. The Discrete Cosine Transform (DCT) spectrum of these images is investigated qualitatively and quantitatively to discover the key frequency coefficients that correspond to the in-focus regions. The model detects these key coefficients by formulating a novel relation between the in-focus and out-of-focus regions in the frequency domain. These frequency coefficients are used to detect the salient in-focus regions. The simulation results show that this attention model achieves good prediction accuracy with low complexity. The prediction accuracy of the proposed in-focus visual attention model is further improved by incorporating sensitivity of the HVS towards the image centre and the human faces. Moreover, the computational complexity is further reduced by using Integer Cosine Transform (ICT). The model is parameter tuned using the hill climbing approach to optimise the accuracy. The performance has been analysed qualitatively and quantitatively using two large image datasets with eye tracking fixation ground truth. The results show that the model achieves higher prediction accuracy with a lower computational complexity compared to the state-of-the-art visual attention models. The proposed model is useful in predicting human fixations in computationally constrained environments. Mainly it is useful in applications such as perceptual video coding, image quality assessment, object recognition and image segmentation

Video Content-Based QoE Prediction for HEVC Encoded Videos Delivered over IP Networks

The recently released High Efficiency Video Coding (HEVC) standard, which halves the transmission bandwidth requirement of encoded video for almost the same quality when compared to H.264/AVC, and the availability of increased network bandwidth (e.g. from 2 Mbps for 3G networks to almost 100 Mbps for 4G/LTE) have led to the proliferation of video streaming services. Based on these major innovations, the prevalence and diversity of video application are set to increase over the coming years. However, the popularity and success of current and future video applications will depend on the perceived quality of experience (QoE) of end users. How to measure or predict the QoE of delivered services becomes an important and inevitable task for both service and network providers. Video quality can be measured either subjectively or objectively. Subjective quality measurement is the most reliable method of determining the quality of multimedia applications because of its direct link to users’ experience. However, this approach is time consuming and expensive and hence the need for an objective method that can produce results that are comparable with those of subjective testing. In general, video quality is impacted by impairments caused by the encoder and the transmission network. However, videos encoded and transmitted over an error-prone network have different quality measurements even under the same encoder setting and network quality of service (NQoS). This indicates that, in addition to encoder settings and network impairment, there may be other key parameters that impact video quality. In this project, it is hypothesised that video content type is one of the key parameters that may impact the quality of streamed videos. Based on this assertion, parameters related to video content type are extracted and used to develop a single metric that quantifies the content type of different video sequences. The proposed content type metric is then used together with encoding parameter settings and NQoS to develop content-based video quality models that estimate the quality of different video sequences delivered over IP-based network. This project led to the following main contributions: (1) A new metric for quantifying video content type based on the spatiotemporal features extracted from the encoded bitstream. (2) The development of novel subjective test approach for video streaming services. (3) New content-based video quality prediction models for predicting the QoE of video sequences delivered over IP-based networks. The models have been evaluated using subjective and objective methods

Deep learning based objective quality assessment of multidimensional visual content

Tese (doutorado) — Universidade de Brasília, Faculdade de Tecnologia, Departamento de Engenharia Elétrica, 2022.Na última década, houve um tremendo aumento na popularidade dos aplicativos multimídia, aumentando assim o conteúdo multimídia. Quando esses conteúdossão gerados, transmitidos, reconstruídos e compartilhados, seus valores de pixel originais são transformados. Nesse cenário, torna-se mais crucial e exigente avaliar a qualidade visual do conteúdo visual afetado para que os requisitos dos usuários finais sejam atendidos. Neste trabalho, investigamos recursos espaciais, temporais e angulares eficazes desenvolvendo algoritmos sem referência que avaliam a qualidade visual de conteúdo visual multidimensional distorcido. Usamos algoritmos de aprendizado de máquina e aprendizado profundo para obter precisão de previsão.Para avaliação de qualidade de imagem bidimensional (2D), usamos padrões binários locais multiescala e informações de saliência e treinamos/testamos esses recursos usando o Random Forest Regressor. Para avaliação de qualidade de vídeo 2D, apresentamos um novo conceito de saliência espacial e temporal e pontuações de qualidade objetivas personalizadas. Usamos um modelo leve baseado em Rede Neural Convolucional (CNN) para treinamento e teste em patches selecionados de quadros de vídeo.Para avaliação objetiva da qualidade de imagens de campo de luz (LFI) em quatro dimensões (4D), propomos sete métodos de avaliação de qualidade LFI (LF-IQA) no total. Considerando que o LFI é composto por multi-views densas, Inspired by Human Visual System (HVS), propomos nosso primeiro método LF-IQA que é baseado em uma arquitetura CNN de dois fluxos. O segundo e terceiro métodos LF-IQA também são baseados em uma arquitetura de dois fluxos, que incorpora CNN, Long Short-Term Memory (LSTM) e diversos recursos de gargalo. O quarto LF-IQA é baseado nas camadas CNN e Atrous Convolution (ACL), enquanto o quinto método usa as camadas CNN, ACL e LSTM. O sexto método LF-IQA também é baseado em uma arquitetura de dois fluxos, na qual EPIs horizontais e verticais são processados no domínio da frequência. Por último, mas não menos importante, o sétimo método LF-IQA é baseado em uma Rede Neural Convolucional de Gráfico. Para todos os métodos mencionados acima, realizamos experimentos intensivos e os resultados mostram que esses métodos superaram os métodos de última geração em conjuntos de dados de qualidade populares.Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES).In the last decade, there has been a tremendous increase in the popularity of multimedia applications, hence increasing multimedia content. When these contents are generated, transmitted, reconstructed and shared, their original pixel values are transformed. In this scenario, it becomes more crucial and demanding to assess visual quality of the affected visual content so that the requirements of end-users are satisfied. In this work, we investigate effective spatial, temporal, and angular features by developing no-reference algorithms that assess the visual quality of distorted multi-dimensional visual content. We use machine learning and deep learning algorithms to obtain prediction accuracy. For two-dimensional (2D) image quality assessment, we use multiscale local binary patterns and saliency information, and train / test these features using Random Forest Regressor. For 2D video quality assessment, we introduce a novel concept of spatial and temporal saliency and custom objective quality scores. We use a Convolutional Neural Network (CNN) based light-weight model for training and testing on selected patches of video frames. For objective quality assessment of four-dimensional (4D) light field images (LFI), we propose seven LFI quality assessment (LF-IQA) methods in total. Considering that LFI is composed of dense multi-views, Inspired by Human Visual System (HVS), we propose our first LF-IQA method that is based on a two-streams CNN architecture. The second and third LF-IQA methods are also based on a two-stream architecture, which incorporates CNN, Long Short-Term Memory (LSTM), and diverse bottleneck features. The fourth LF-IQA is based on CNN and Atrous Convolution layers (ACL), while the fifth method uses CNN, ACL, and LSTM layers. The sixth LF-IQA method is also based on a two-stream architecture, in which, horizontal and vertical EPIs are processed in the frequency domain. Last, but not least, the seventh LF-IQA method is based on a Graph Convolutional Neural Network. For all of the methods mentioned above, we performed intensive experiments, and the results show that these methods outperformed state-of-the-art methods on popular quality datasets