40,744 research outputs found
Energy-efficient wireless communication
In this chapter we present an energy-efficient highly adaptive network interface architecture and a novel data link layer protocol for wireless networks that provides Quality of Service (QoS) support for diverse traffic types. Due to the dynamic nature of wireless networks, adaptations in bandwidth scheduling and error control are necessary to achieve energy efficiency and an acceptable quality of service. In our approach we apply adaptability through all layers of the protocol stack, and provide feedback to the applications. In this way the applications can adapt the data streams, and the network protocols can adapt the communication parameters
Quality of Service over Specific Link Layers: state of the art report
The Integrated Services concept is proposed as an enhancement to the current Internet architecture, to provide a better Quality of Service (QoS) than that provided by the traditional Best-Effort service. The features of the Integrated Services are explained in this report. To support Integrated Services, certain requirements are posed on the underlying link layer. These requirements are studied by the Integrated Services over Specific Link Layers (ISSLL) IETF working group. The status of this ongoing research is reported in this document. To be more specific, the solutions to provide Integrated Services over ATM, IEEE 802 LAN technologies and low-bitrate links are evaluated in detail. The ISSLL working group has not yet studied the requirements, that are posed on the underlying link layer, when this link layer is wireless. Therefore, this state of the art report is extended with an identification of the requirements that are posed on the underlying wireless link, to provide differentiated Quality of Service
Lessons learned from the design of a mobile multimedia system in the Moby Dick project
Recent advances in wireless networking technology and the exponential development of semiconductor technology have engendered a new paradigm of computing, called personal mobile computing or ubiquitous computing. This offers a vision of the future with a much richer and more exciting set of architecture research challenges than extrapolations of the current desktop architectures. In particular, these devices will have limited battery resources, will handle diverse data types, and will operate in environments that are insecure, dynamic and which vary significantly in time and location. The research performed in the MOBY DICK project is about designing such a mobile multimedia system. This paper discusses the approach made in the MOBY DICK project to solve some of these problems, discusses its contributions, and accesses what was learned from the project
The Design of a System Architecture for Mobile Multimedia Computers
This chapter discusses the system architecture of a portable computer, called Mobile Digital Companion, which provides support for handling multimedia applications energy efficiently. Because battery life is limited and battery weight is an important factor for the size and the weight of the Mobile Digital Companion, energy management plays a crucial role in the architecture. As the Companion must remain usable in a variety of environments, it has to be flexible and adaptable to various operating conditions. The Mobile Digital Companion has an unconventional architecture that saves energy by using system decomposition at different levels of the architecture and exploits locality of reference with dedicated, optimised modules. The approach is based on dedicated functionality and the extensive use of energy reduction techniques at all levels of system design. The system has an architecture with a general-purpose processor accompanied by a set of heterogeneous autonomous programmable modules, each providing an energy efficient implementation of dedicated tasks. A reconfigurable internal communication network switch exploits locality of reference and eliminates wasteful data copies
Wireless industrial monitoring and control networks: the journey so far and the road ahead
While traditional wired communication technologies have played a crucial role in industrial monitoring and control networks over the past few decades, they are increasingly proving to be inadequate to meet the highly dynamic and stringent demands of today’s industrial applications, primarily due to the very rigid nature of wired infrastructures. Wireless technology, however, through its increased pervasiveness, has the potential to revolutionize the industry, not only by mitigating the problems faced by wired solutions, but also by introducing a completely new class of applications. While present day wireless technologies made some preliminary inroads in the monitoring domain, they still have severe limitations especially when real-time, reliable distributed control operations are concerned. This article provides the reader with an overview of existing wireless technologies commonly used in the monitoring and control industry. It highlights the pros and cons of each technology and assesses the degree to which each technology is able to meet the stringent demands of industrial monitoring and control networks. Additionally, it summarizes mechanisms proposed by academia, especially serving critical applications by addressing the real-time and reliability requirements of industrial process automation. The article also describes certain key research problems from the physical layer communication for sensor networks and the wireless networking perspective that have yet to be addressed to allow the successful use of wireless technologies in industrial monitoring and control networks
Energy-efficient adaptive wireless network design
Energy efficiency is an important issue for mobile computers since they must rely on their batteries. We present an energy-efficient highly adaptive architecture of a network interface and novel data link layer protocol for wireless networks that provides quality of service (QoS) support for diverse traffic types. Due to the dynamic nature of wireless networks, adaptations are necessary to achieve energy efficiency and an acceptable quality of service. The paper provides a review of ideas and techniques relevant to the design of an energy efficient adaptive wireless networ
A Dynamic Multimedia User-Weight Classification Scheme for IEEE_802.11 WLANs
In this paper we expose a dynamic traffic-classification scheme to support
multimedia applications such as voice and broadband video transmissions over
IEEE 802.11 Wireless Local Area Networks (WLANs). Obviously, over a Wi-Fi link
and to better serve these applications - which normally have strict bounded
transmission delay or minimum link rate requirement - a service differentiation
technique can be applied to the media traffic transmitted by the same mobile
node using the well-known 802.11e Enhanced Distributed Channel Access (EDCA)
protocol. However, the given EDCA mode does not offer user differentiation,
which can be viewed as a deficiency in multi-access wireless networks.
Accordingly, we propose a new inter-node priority access scheme for IEEE
802.11e networks which is compatible with the EDCA scheme. The proposed scheme
joins a dynamic user-weight to each mobile station depending on its outgoing
data, and therefore deploys inter-node priority for the channel access to
complement the existing EDCA inter-frame priority. This provides efficient
quality of service control across multiple users within the same coverage area
of an access point. We provide performance evaluations to compare the proposed
access model with the basic EDCA 802.11 MAC protocol mode to elucidate the
quality improvement achieved for multimedia communication over 802.11 WLANs.Comment: 15 pages, 8 figures, 3 tables, International Journal of Computer
Networks & Communications (IJCNC
Multicast broadcast services support in OFDMA-based WiMAX systems [Advances in mobile multimedia]
Multimedia stream service provided by broadband wireless networks has emerged as an important technology and has attracted much attention. An all-IP network architecture with reliable high-throughput air interface makes orthogonal frequency division multiplexing access (OFDMA)-based mobile worldwide interoperability for microwave access (mobile WiMAX) a viable technology for wireless multimedia services, such as voice over IP (VoIP), mobile TV, and so on. One of the main features in a WiMAX MAC layer is that it can provide'differentiated services among different traffic categories with individual QoS requirements. In this article, we first give an overview of the key aspects of WiMAX and describe multimedia broadcast multicast service (MBMS) architecture of the 3GPP. Then, we propose a multicast and broadcast service (MBS) architecture for WiMAX that is based on MBMS. Moreover, we enhance the MBS architecture for mobile WiMAX to overcome the shortcoming of limited video broadcast performance over the baseline MBS model. We also give examples to demonstrate that the proposed architecture can support better mobility and offer higher power efficiency
Recommended from our members
Multimedia delivery in the future internet
The term “Networked Media” implies that all kinds of media including text, image, 3D graphics, audio
and video are produced, distributed, shared, managed and consumed on-line through various networks,
like the Internet, Fiber, WiFi, WiMAX, GPRS, 3G and so on, in a convergent manner [1]. This white
paper is the contribution of the Media Delivery Platform (MDP) cluster and aims to cover the Networked
challenges of the Networked Media in the transition to the Future of the Internet.
Internet has evolved and changed the way we work and live. End users of the Internet have been confronted
with a bewildering range of media, services and applications and of technological innovations concerning
media formats, wireless networks, terminal types and capabilities. And there is little evidence that the pace
of this innovation is slowing. Today, over one billion of users access the Internet on regular basis, more
than 100 million users have downloaded at least one (multi)media file and over 47 millions of them do so
regularly, searching in more than 160 Exabytes1 of content. In the near future these numbers are expected
to exponentially rise. It is expected that the Internet content will be increased by at least a factor of 6, rising
to more than 990 Exabytes before 2012, fuelled mainly by the users themselves. Moreover, it is envisaged
that in a near- to mid-term future, the Internet will provide the means to share and distribute (new)
multimedia content and services with superior quality and striking flexibility, in a trusted and personalized
way, improving citizens’ quality of life, working conditions, edutainment and safety.
In this evolving environment, new transport protocols, new multimedia encoding schemes, cross-layer inthe
network adaptation, machine-to-machine communication (including RFIDs), rich 3D content as well as
community networks and the use of peer-to-peer (P2P) overlays are expected to generate new models of
interaction and cooperation, and be able to support enhanced perceived quality-of-experience (PQoE) and
innovative applications “on the move”, like virtual collaboration environments, personalised services/
media, virtual sport groups, on-line gaming, edutainment. In this context, the interaction with content
combined with interactive/multimedia search capabilities across distributed repositories, opportunistic P2P
networks and the dynamic adaptation to the characteristics of diverse mobile terminals are expected to
contribute towards such a vision.
Based on work that has taken place in a number of EC co-funded projects, in Framework Program 6 (FP6)
and Framework Program 7 (FP7), a group of experts and technology visionaries have voluntarily
contributed in this white paper aiming to describe the status, the state-of-the art, the challenges and the way
ahead in the area of Content Aware media delivery platforms
- …