9,291 research outputs found
Generation of one-million-mode continuous-variable cluster state by unlimited time-domain multiplexing
In recent quantum optical continuous-variable experiments, the number of
fully inseparable light modes has drastically increased by introducing a
multiplexing scheme either in the time domain or in the frequency domain. Here,
modifying the time-domain multiplexing experiment reported in Nature Photonics
7, 982 (2013), we demonstrate successive generation of fully inseparable light
modes for more than one million modes. The resulting multi-mode state is useful
as a dual-rail CV cluster state. We circumvent the previous problem of optical
phase drifts, which has limited the number of fully inseparable light modes to
around ten thousands, by continuous feedback control of the optical system.Comment: 12 pages, 8 figure
Applications of the optical fiber to the generation and to the measurement of low-phase-noise microwave signals
The optical fiber used as a microwave delay line exhibits high stability and
low noise and makes accessible a long delay (>100 microseconds) in a wide
bandwidth (about 40 GHz, limited by the optronic components). Hence, it finds
applications as the frequency reference in microwave oscillators and as the
reference discriminator for the measurement of phase noise. The fiber is
suitable to measure the oscillator stability with a sensitivity of parts in
1E-12. Enhanced sensitivity is obtained with two independent delay lines, after
correlating and averaging. Short-term stability of parts in 1E-12 is achieved
inserting the delay line in an oscillator. The frequency can be set in steps
multiple of the inverse delay, which is in the 10-100 kHz region.
This article adds to the available references a considerable amount of
engineering and practical knowledge, the understanding of 1/f noise,
calibration, the analysis of the cross-spectrum technique to reduce the
instrument background, the phase-noise model of the oscillator, and the
experimental test of the oscillator model.Comment: 23 pages, 13 figures, 41 reference
Broadband quadrature-squeezed vacuum and nonclassical photon number correlations from a nanophotonic device
We report the first demonstrations of both quadrature squeezed vacuum and
photon number difference squeezing generated in an integrated nanophotonic
device. Squeezed light is generated via strongly driven spontaneous four-wave
mixing below threshold in silicon nitride microring resonators. The generated
light is characterized with both homodyne detection and direct measurements of
photon statistics using photon number-resolving transition edge sensors. We
measure ~dB of broadband quadrature squeezing (~dB inferred
on-chip) and ~dB of photon number difference squeezing (~dB
inferred on-chip). Nearly-single temporal mode operation is achieved, with raw
unheralded second-order correlations as high as measured
(~when corrected for noise). Multi-photon events of over 10 photons
are directly detected with rates exceeding any previous quantum optical
demonstration using integrated nanophotonics. These results will have an
enabling impact on scaling continuous variable quantum technology.Comment: Significant improvements and updates to photon number squeezing
results and discussions, including results on single temporal mode operatio
Nonlinearity and Noise Effects in Multi-level Signal Millimeter-Wave over Fiber Transmission using Single- and Dual-Wavelength Modulation
We transmit multilevel quadrature amplitude modulation (QAM) data-IEEE 802.16 schemes-at 20 MSps and an orthogonal frequency-division multiplexing (OFDM) 802.11 g signal (54 Mbps) with a 25 GHz millimeter-wave over fiber system, which employs a dual wavelength source, over 20 km of single mode fiber. Downlink data transmission is successfully demonstrated over both optical and wireless (up to 12 m) paths with good error vector magnitude. An analysis of two different schemes, in which data is applied to one (single) and both (dual) of the wavelengths of a dual wavelength source, is carried out. The system performance is analyzed through simulation and a good match with experimental results is obtained. The analysis investigates the impact of Mach-Zehnder modulator (MZM) and RF amplifier nonlinearity and various noise sources, such as laser relative intensity noise, amplified spontaneous emission, thermal, and shot noise. A comparison of single carrier QAM IEEE 802.16 and OFDM in terms of their sensitivity to the distortions from MZM and RF amplifier nonlinearity is also presented
A survey on fiber nonlinearity compensation for 400 Gbps and beyond optical communication systems
Optical communication systems represent the backbone of modern communication
networks. Since their deployment, different fiber technologies have been used
to deal with optical fiber impairments such as dispersion-shifted fibers and
dispersion-compensation fibers. In recent years, thanks to the introduction of
coherent detection based systems, fiber impairments can be mitigated using
digital signal processing (DSP) algorithms. Coherent systems are used in the
current 100 Gbps wavelength-division multiplexing (WDM) standard technology.
They allow the increase of spectral efficiency by using multi-level modulation
formats, and are combined with DSP techniques to combat the linear fiber
distortions. In addition to linear impairments, the next generation 400 Gbps/1
Tbps WDM systems are also more affected by the fiber nonlinearity due to the
Kerr effect. At high input power, the fiber nonlinear effects become more
important and their compensation is required to improve the transmission
performance. Several approaches have been proposed to deal with the fiber
nonlinearity. In this paper, after a brief description of the Kerr-induced
nonlinear effects, a survey on the fiber nonlinearity compensation (NLC)
techniques is provided. We focus on the well-known NLC techniques and discuss
their performance, as well as their implementation and complexity. An extension
of the inter-subcarrier nonlinear interference canceler approach is also
proposed. A performance evaluation of the well-known NLC techniques and the
proposed approach is provided in the context of Nyquist and super-Nyquist
superchannel systems.Comment: Accepted in the IEEE Communications Surveys and Tutorial
New concepts of inertial measurements with multi-species atom interferometry
In the field of cold atom inertial sensors, we present and analyze innovative
configurations for improving their measurement range and sensitivity,
especially attracting for onboard applications. These configurations rely on
multi-species atom interferometry, involving the simultaneous manipulation of
different atomic species in a unique instrument to deduce inertial
measurements. Using a dual-species atom accelerometer manipulating
simultaneously both isotopes of rubidium, we report a preliminary experimental
realization of original concepts involving the implementation of two atom
interferometers first with different interrogation times and secondly in phase
quadrature. These results open the door to a new generation of atomic sensors
relying on high performance multi-species atom interferometric measurements
Study of an electro-optic modulator capable of generating simultaneous amplitude and phase modulations
We report on the analysis and prototype-characterization of a dual-electrode
electro-optic modulator that can generate both amplitude and phase modulations
with a selectable relative phase, termed a universally tunable modulator (UTM).
All modulation states can be reached by tuning only the electrical inputs,
facilitating real-time tuning, and the device is shown to have good suppression
and stability properties. A mathematical analysis is presented, including the
development of a geometric phase representation for modulation. The
experimental characterization of the device shows that relative suppressions of
38 dB, 39 dB and 30 dB for phase, single-sideband and carrier-suppressed
modulations, respectively, can be obtained, as well as showing the device is
well-behaved when scanning continuously through the parameter space of
modulations. Uses for the device are discussed, including the tuning of lock
points in optical locking schemes, single sideband applications, modulation
fast-switching applications, and applications requiring combined modulations.Comment: 12 pages, 8 figures, 1 tabl
Advanced digital modulation: Communication techniques and monolithic GaAs technology
Communications theory and practice are merged with state-of-the-art technology in IC fabrication, especially monolithic GaAs technology, to examine the general feasibility of a number of advanced technology digital transmission systems. Satellite-channel models with (1) superior throughput, perhaps 2 Gbps; (2) attractive weight and cost; and (3) high RF power and spectrum efficiency are discussed. Transmission techniques possessing reasonably simple architectures capable of monolithic fabrication at high speeds were surveyed. This included a review of amplitude/phase shift keying (APSK) techniques and the continuous-phase-modulation (CPM) methods, of which MSK represents the simplest case
- …