Distributed radio resource management in LTE-advanced networks with type 1 relay

Long Term Evolution (LTE)-Advanced is proposed as a candidate of the 4th generation (4G) mobile telecommunication systems. As an evolved version of LTE, LTE- Advanced is also based on Orthogonal Frequency Division Multiplexing (OFDM) and in addition, it adopts some emerging technologies, such as relaying. Type I relay nodes, de_ned in LTE-Advanced standards, can control their cells with their own reference signals and have Radio Resource Management (RRM) functionalities. The rationale of RRM is to decide which resources are allocated to which users for optimising performance metrics, such as throughput, fairness, power consumption and Quality of Service (QoS). The RRM techniques in LTE-Advanced networks, including route selection, resource partitioning and resource scheduling, are facing new challenges brought by Type 1 relay nodes and increasingly becoming research focuses in recent years. The research work presented in this thesis has made the following contributions. A service-aware adaptive bidirectional optimisation route selection strategy is proposed to consider both uplink optimisation and downlink optimisation according to service type. The load between di_erent serving nodes, including eNBs and relay nodes, are rebalanced under the _xed resource partitioning. The simulation results show that larger uplink throughputs and bidirectional throughputs can be achieved, compared with existing route selection strategies. A distributed two-hop proportional fair resource allocation scheme is proposed in order to provide better two-hop end-to-end proportional fairness for all the User Equipments (UEs), especially for the relay UEs. The resource partitioning is based on the cases of none Frequency Reuse (FR) pattern, full FR pattern and partial FR patterns. The resource scheduling in access links and backhaul links are considered jointly. A proportional fair joint route selection and resource partitioning algorithm isproposed to obtain an improved solution to the two-hop Adaptive Partial Frequency Reusing (APFR) problem with one relay node per cell. In addition, two special situations of APFR, full FR and no FR, are utilised to narrow the iterative search range of the proposed algorithm and reduce its complexity

Quantifying Potential Energy Efficiency Gain in Green Cellular Wireless Networks

Conventional cellular wireless networks were designed with the purpose of providing high throughput for the user and high capacity for the service provider, without any provisions of energy efficiency. As a result, these networks have an enormous Carbon footprint. In this paper, we describe the sources of the inefficiencies in such networks. First we present results of the studies on how much Carbon footprint such networks generate. We also discuss how much more mobile traffic is expected to increase so that this Carbon footprint will even increase tremendously more. We then discuss specific sources of inefficiency and potential sources of improvement at the physical layer as well as at higher layers of the communication protocol hierarchy. In particular, considering that most of the energy inefficiency in cellular wireless networks is at the base stations, we discuss multi-tier networks and point to the potential of exploiting mobility patterns in order to use base station energy judiciously. We then investigate potential methods to reduce this inefficiency and quantify their individual contributions. By a consideration of the combination of all potential gains, we conclude that an improvement in energy consumption in cellular wireless networks by two orders of magnitude, or even more, is possible.Comment: arXiv admin note: text overlap with arXiv:1210.843

Optimal resource sharing and spectrum leasing in energy efficient relay-assisted networks

Assuming a bidirectional relay assisted network, we first study the problem of optimal resource sharing between two transceiver pairs. One of the pairs, referred to as the primary pair, owns the spectral resources while the other pair, called the secondary pair, is considered to own the relay infrastructure. Assuming amplify-and-forward relaying scheme and aiming to establish a cooperation between the two networks, we study three different design problems in a single carrier scenario. In the first approach we maximize the smaller of the secondary transceiver rates subject to two separate constraints on the total powers consumed in the primary and the secondary networks while providing a minimum data rate to the primary pair. In the second approach, we replace the per network power constraint by a constraint on the average total power consumed in both networks. The third approach combines the two aforementioned methods to materialize spectrum leasing and sharing for the case when the primary network is active with a certain probability. Then we investigate two different design approaches to the multi-carrier scenario. The first approach relies on maximizing the secondary network average sum-rate subject to two spectral power masks for the two networks while providing a minimum sum-rate to the primary pair in a multi-relay scenario. In the second approach, we replace the spectral power mask for each network by a constraint on the total power consumed in that network. Different from the previous studies, we further investigate the resource allocation problem between several energy harvesting relay nodes such that a unidirectional communication link is established between a pair of users and the harvested energy is optimally allocated between the relays such that the overall throughput of the network is maximized. Assuming the availability of full knowledge of channel state information and that of the energy packets, we maximize the throughput of the network under two sets of constraints on the status of the battery. We then consider the problem of maximizing the average throughput of the system, for the case when only the statistics of the channels are available

Radio resource management techniques for QoS provision in 5G networks

Premi extraordinari doctorat UPC curs 2017-2018. Àmbit d’Enginyeria de les TICAs numerous mobile applications and over-the-top (OTT) services emerge and mobile Internet connectivity becomes ubiquitous, the provision of high quality of service (QoS) is more challenging for mobile network operators (MNOs). Research efforts focus on the development of innovative resource management techniques and have introduced the long term evolution advanced (LTE-A) communication standard. Novel business models make the growth of network capacity sustainable by enabling MNOs to combine their resources. The fifth generation (5G) mobile networks will involve technologies and business stakeholders with different capabilities and demands that may affect the QoS provision, requiring efficient radio resource sharing. The need for higher network capacity has introduced novel technologies that improve resource allocation efficiency. Direct connectivity among user equipment terminals (UEs) circumventing the LTE-A infrastructure alleviates the network overload. Part of mobile traffic is offloaded to outband device-to-device (D2D) connections (in unlicensed spectrum) enabling data exchange between UEs directly or via UEs-relays. Still, MNOs need additional spectrum resources and infrastructure. The inter-operator network sharing concept has emerged motivating the adoption of virtualization that enables network slicing, i.e., dynamic separation of resources in virtual slices (VSs). VSs are managed in isolation by different tenants using software defined networking and encompass core and radio access network resources allocated periodically to UEs. When UEs access OTT applications, flows with different QoS demands and priorities determined by OTT service providers (OSPs) are generated. OSPs’ policies should be considered in VS allocation. The coexisting technologies, business models and stakeholders require sophisticated radio resource management (RRM) techniques. To that end, RRM is performed in a complex ecosystem. When D2D communication involves data concurrently downloaded by the mobile network, QoS may be affected by LTE-A network parameters (resource scheduling policy, downlink channel conditions). It is also affected by the relay selection, as UEs may not be willing to help unknown UE pairs and UEs’ social ties in mobile applications may influence willingness for D2D cooperation. Thus, effective medium access control (MAC) mechanisms should coordinate D2D transmissions employing advanced techniques, e.g., network coding (NC). When UEs access OTT applications, OSPs’ policies are not considered by MNOs in RRM and OSPs cannot apply flow prioritization. Network neutrality issues also arise when OSPs claim resources from MNOs aiming to minimize grade of service (GoS). OSPs’ intervention may delay flows’ accommodation due to the time required for OSP-MNO interaction and the time the flows spent waiting for resources. This thesis proposes novel solutions to the RRM issues of outband D2D communication and VS allocation for OSPs in 5G networks. We present a cooperative D2D MAC protocol that leverages the opportunities for NC in D2D communication under the influence of LTE-A network parameters and its throughput performance analysis. The protocol improves D2D throughput and energy efficiency, especially for UEs with better downlink channel conditions. We next introduce social awareness in D2D MAC design and present a social-aware cooperative D2D MAC protocol that employs UEs’ social ties to promote the use of friendly relays reducing the total energy consumption. Motivated by the lack of approaches for OSP-oriented RRM, we present a novel flow prioritization algorithm based on matching theory that applies OSPs’ policies respecting the network neutrality and the analysis of its GoS and delay performance. The algorithm maintains low overhead and delay without affecting fairness among OSPs. Our techniques highlight the QoS improvement induced by the joint consideration of different technologies and business stakeholders in RRM design.A medida que varias aplicaciones móviles y servicios over-the-top (OTT) surgen y el Internet móvil se vuelve ubicua, la prestación de alta calidad de servicio (QoS) es desafiante para los operadores de red móvil (MNOs). Los estudios de investigación se enfocan en técnicas innovadoras para la gestión de recursos de red y han resultado en la especificación del estándar de comunicación long term evolution advanced (LTE-A). Modelos comerciales nuevos hacen que el crecimiento de la capacidad de red sea sostenible al permitir que MNOs combinen sus recursos. La quinta generación (5G) de redes móviles implicará tecnologías y partes comerciales interesadas con varias habilidades y demandas que pueden afectar la provisión de QoS y demandan la gestión eficaz de recursos de radio. La necesidad de capacidad de red más alta ha introducido tecnologías que hacen más eficiente la asignación de recursos. La conectividad directa entre terminales de equipos de usuarios (UEs) eludiendo la infraestructura LTE-A alivia la sobrecarga de red. Parte del tráfico es dirigido a conexiones de dispositivo a dispositivo (D2D) outband permitiendo la comunicación de UEs directamente o con relés. Los MNOs necesitan nuevos recursos de espectro e infraestructura. El intercambio de recursos entre MNOs ha surgido motivando la adopción de virtualización que realiza la segmentación de red i.e., la separación dinámica de recursos en trozos virtuales (VSs). Los VSs son administrados de forma aislada por inquilinos diferentes con software defined networking y abarcan recursos de red core y radio access asignadas periódicamente a UEs. Cuando UEs usan aplicaciones OTT, flujos de aplicación con demandas y prioridades definidas por proveedores de servicios OTT (OSPs) se generan. Las políticas de OSPs deben ser integradas en la asignación de VSs. La coexistencia de varias tecnologías y partes comerciales demanda técnicas sofisticadas de gestión de recursos radio (RRM). Con ese fin, la RRM se realiza en un ecosistema complejo. Si la comunicación D2D involucra datos descargados simultáneamente por la red móvil, los parámetros de red LTE-A (política de scheduling de recursos, condiciones de canal downlink) afectan el QoS. La selección de relés afecta el rendimiento porque los UEs no desean siempre ayudar a UEs desconocidos. Las relaciones sociales de los UEs en aplicaciones móviles pueden determinar la voluntad para la comunicación cooperativa D2D. Por lo tanto, mecanismos de control de acceso al medio (MAC) deben coordinar las transmisiones D2D con técnicas avanzadas ej., codificación de red. Si los UEs usan servicios OTT, las políticas de OSPs no son consideradas en RRM y los OSPs no emplean flujos prioritarios. Problemas de neutralidad de red surgen cuando los OSPs reclaman recursos de MNOs para minimizar el grado de servicio (GoS). La intervención de OSPs puede causar retraso en el servicio de flujos debido a la interacción OSP-MNO y el tiempo requerido para que los flujos reciban recursos. Esta tesis presenta soluciones nuevas para los problemas RRM de comunicación D2D outband y asignación de VSs a OSPs en redes 5G. Proponemos un protocolo D2D MAC cooperativo que explota las oportunidades de NC bajo la influencia de parámetros de red LTE-A y su análisis de rendimiento. El protocolo mejora el rendimiento y la eficiencia energética especialmente para UEs con mejores condiciones de canal downlink. Introducimos la conciencia social en el D2D MAC y proponemos un protocolo que utiliza relaciones sociales de UEs para elegir relés-amigos y reduce el consumo de energía. Dada la falta de técnicas que aborden el problema RRM de OSPs presentamos un algoritmo que aplique políticas de OSPs y respete la neutralidad usando la teoría de matching, y su análisis de GoS y retraso. El algoritmo induce bajo coste y retraso sin afectar la imparcialidad entre OSPs. Estas técnicas demuestran la mejora de QoS gracias a la consideración de tecnologas y partes comerciales diferentes en RRM.Award-winningPostprint (published version

Statistical Performance Evaluation for Energy Harvesting Communications based on Large Deviation Theorem

Energy harvesting (EH) is a promising technology for enhancing a network’s quality of service (QoS). EH-based communication systems are studied by tackling the challenges of energy-outage probability and energy conditioning. These issues motivate this research to develop new solutions for increasing the lifetime of device batteries by leveraging renewable energy sources available in the surrounding environment, for instance, from solar and radio-frequency (RF) energy through harvesting. This dissertation studies an energy outage problem and user QoS requirements for energy harvesting communications. In the first part of this dissertation, the performance of an energy harvesting communication link is analysed by allowing a certain level of energy-outage. In EH systems, energy consumed from the battery depends on the QoS required by the end user and on the channel state information. At the same time, the energy arrival to the battery depends on the strength of the power source, solar in this case, and is independent of the fading channel conditions and the required QoS. Due to the independence between the energy arrival into the battery and the energy consumed from there, it is challenging to estimate the exact status of the available energy in the battery. An energy outage is experienced when there is no further energy for the system to utilise for data transmission. In this part, a thorough study was carried out to analyse the required energy harvesting (EH) rate for satisfying the QoS requirements when a level of energy-outage is allowed in a point-to-point EH-based communication system equipped with a finite-sized battery. Furthermore, an expression relating the rate of the incoming energy with the fading channel conditions and the minimum required QoS of the system was provided to analyse the performance of the EH-based communication system under energy constraints. Finally, numerical results confirm the proposed mechanism’s analytical findings and correctness. In the second part of this dissertation, the performance of point-to-point communications is investigated in which the source node can harvest and store energy from RF signals and then use the harvested energy to communicate with its end destination. The continuous availability of RF energy has proved advantageous as a wireless power source to support low-power devices, making RF-based energy harvesting an alternative and viable solution for powering next-generation wireless networks, particularly for Internet-of-Things (IoT) applications. Specifically, the point-to-point RF-based energy-harvesting communication is considered, where the transmitter, which can be an IoT sensor, implements a time-switching protocol between the energy harvesting and the information transfer, and we focus on analysing the system performance while aiming to guarantee the required QoS of the end user subject to system constraint energy outage. The time-switching circuit at the source node allows the latter to switch between harvesting energy from a distant RF energy source and transmitting data to its target destination using the scavenged energy. Using a duality principle between the physical energy queue and a proposed virtual energy queue and assuming that a certain level of energy outage can be tolerated in the communication process, the system performance was evaluated with a novel analytical framework that leverages tools for the large deviation principle. In the third and last part of this dissertation, an empirical study of the RF-EH model is presented for ensuring the QoS constraints during an energy-outage for Simultaneous Wireless Information and Power Transfer (SWIPT) network. We consider a relay network over a Rayleigh fading channel where the relay lacks a permanent power source. Thus, we obtain energy from wireless energy harvesting (EH) of the source’s signals to maintain operation. This process is performed using a time-switching protocol at the relay for enhancing the quality of service (QoS) in SWIPT networks. A numerical approach is incorporated to evaluate the performance of the proposed RF-EH model in terms of different evaluation parameters such as time-switching protocol, transmit power and outage. The assumptions of the large deviation principle are satisfied using a proposed virtual energy queuing model, which is then used for the performance analysis. We established a closed-form expression for the system’s probability of experiencing an energy outage and the energy consumed by the relay battery